1972 Jeep Commando Performance and Racing Products
Find Your Specific 1972 Jeep Commando Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 1972 Commando. Advance Auto Parts has popular Commando parts like Performance Oil Filters, Performance Engines, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Commando model years including
1966,
1967,
1968,
1969,
1970,
1971,
1973 and more. Select a category of 1972 Jeep Commando Performance and Racing Products below and start saving instantly.
Popular 1972 Jeep Commando Performance and Racing Products Categories
Essential Performance and Racing Products for 1972 Jeep Commandos
K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2003 (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
See More
PerTronix – PerTronix Flame-Thrower Electronic Distributor Billet, D160800 (Part No.D160800)
from
$448.99
Our line of Billet Plug n€™ Play Distributors are based on a precision CNC-machined housing with an upper ball bearing to support the steel distributor shaft accurately from idle to redline rpm. These distributors feature our maintenance-free Ignitor II or III electronic ignition module to produce a strong spark and steady ignition timing.
See More
Yukon Gear – Yukon Gear 1330 Lifetime U/Joint, 42004 (Part No.42004)
from
$53.99
“1330 Yukon Lifetime U/Joint. 3.625″” snap ring span, 1.062″” cap diameter. Outside snap ring.”
See More
Edelbrock – Edelbrock Performer Series Retainer, 9720 (Part No.9720)
from
$103.99
Edelbrock Valve Spring Retainers are made of superior quality steel and are machined and heat treated for maximum strength. They feature a black oxide finish to prevent rust and corrosion
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1434 (Part No.1434)
from
$32.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Accel – Accel Distributor Cap And Rotor Kit, 8120 (Part No.8120)
K&N – K&N Fuel Filter, PF-1300 (Part No.PF-1300)
from
$20.99
K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
See More
Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX (Part No.0-4412BKX)
from
$799.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More
Edelbrock – Edelbrock Performer-Plus Camshaft Kit, 2132 (Part No.2132)
from
$371.99
“Edelbrock Performer-Plus Camshaft No: 2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus No: 2132 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 275 Ft Lbs of Torque when paired with Performer AMC intake manifold No: 2131 and stock cylinder heads. Camshaft specifications: – Intake duration: 204 Degrees – Exhaust duration: 214 Degrees – Intake lift: .448″” – Exhaust lift: .472″” – Lobe separation: 110 Degree – Intake Center Line: 105 Degree – Vacuum: 15″””
See More
Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
See More
Edelbrock – Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7818 (Part No.7818)
from
$130.99
Edelbrock part No: 7818 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Four Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm. Performer roller chain sets are engineered to operate up to 6500 rpm. Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures. Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking. Never stretch the chain with a screwdriver. Check for clearance between the timing chain and block and between the chain and front cover before reassembly. Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break.
See More
Competition Cams – Competition Cams High Energy Timing Set for ’69-’81 AMC 290-401 V8, 3218 (Part No.3218)
Edelbrock – Edelbrock Sure Seat Valve Springs, 5792 (Part No.5792)
from
$157.99
The Edelbrock No: 5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Yellow with Orange Straight Boots – 4040 8mm universal fit super stock spark plug wire sets feature a spiral core… (Part No.4040)
from
$69.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Black Wire with Black Straight Boots – 5040K, Spark Plug Wires, Super Stock, Spiral Core, 8mm, Black,… (Part No.5040K)
from
$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Mr. Gasket – Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (Part No.4363)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
See More
Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2471S (Part No.2471S)
from
$55.29
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
See More
Mr. Gasket – Mr. Gasket Thermocap Radiator Cap, 2470R (Part No.2470R)
from
$58.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
See More
Energy Suspension – Energy Suspension Sway Bar Bushing Set, 2.5101G (Part No.2.5101G)
from
$34.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
See More
Edelbrock – Edelbrock Signature Series Valve Covers, 4431 (Part No.4431)
from
$79.99
The Edelbrock No: 4431 Signature Series Valve Covers are designed for AMC/Jeep 290-304-343-360-390-401 V8 ’67-91 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.
See More
Edelbrock – Edelbrock Cylinder Head Gasket Set, 7329 (Part No.7329)
from
$113.99
“Edelbrock part No: 7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″” bore size, .045″” compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Edelbrock cylinder head will not. This head gasket is graphite with a steel core and has a stainless steel fire ring. Gasket is compatible with cast iron or aluminum cylinder heads.”
See More
Accel – Accel Ignition Coil – SuperStock – Breakerless Electronic Coil – Chrome – This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00… (Part No.8145C)
from
$84.29
“Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.”
See More
Accel – Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (Part No.8140C)
from
$55.19
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Ignition Coil – Yellow – 42000v 1.4 ohm primary – Points – up to 6500 RPM – The 8140 super stock ignition coil is a canister style coil that … (Part No.8140)
from
$49.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Upgrade your 1972 Jeep Commando with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1972 Jeep Commando, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Commando functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Performance and Racing Products for the 1972 Jeep Commando, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Engines
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1972 Jeep Commando at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $19.99 to $799.99, with
an average price of $180.93.
Our 40 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1972 Jeep Commando without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Jeep Commando, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, K&N, Accel, and more.
Mallory Performance and Racing Products
start at just $99.99 and boast an impressive 4.9 stars average rating from customers.
K&N and Accel also bring quality to the table, with Performance and Racing Products available starting at $19.99, and at an average 4.8 stars rating.
With 780 customer reviews and counting, our 1972 Jeep Commando Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1972 Jeep Commando is always ready to roll. We’re committed to providing you with everything you need to keep your Commando in top shape, all in one place.
Start shopping confidently below for your 1972 Jeep Commando!
Best-Selling Performance Oil Filters for 1972 Jeep Commandos
Enhance the driving experience in your Jeep with 1 quality Performance Oil Filter components, starting at $19.99.
K&N – K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2003 (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
See More
Most Popular 1972 Jeep Commando Performance Engines
Customize your Jeep with 7 Performance Engines products
like Performance Engine Cylinder Head Gaskets,
Performance Engine Coolant Thermostats, and
Performance Engine Timing Sets and Components, all
priced under $371.99.
Mr. Gasket – Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (Part No.4363)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
See More
Edelbrock – Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set, 7818 (Part No.7818)
from
$130.99
Edelbrock part No: 7818 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Four Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm. Performer roller chain sets are engineered to operate up to 6500 rpm. Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures. Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking. Never stretch the chain with a screwdriver. Check for clearance between the timing chain and block and between the chain and front cover before reassembly. Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break.
See More
Edelbrock – Edelbrock Performer-Plus Camshaft Kit, 2132 (Part No.2132)
from
$371.99
“Edelbrock Performer-Plus Camshaft No: 2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus No: 2132 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 275 Ft Lbs of Torque when paired with Performer AMC intake manifold No: 2131 and stock cylinder heads. Camshaft specifications: – Intake duration: 204 Degrees – Exhaust duration: 214 Degrees – Intake lift: .448″” – Exhaust lift: .472″” – Lobe separation: 110 Degree – Intake Center Line: 105 Degree – Vacuum: 15″””
See More
Edelbrock – Edelbrock Sure Seat Valve Springs, 5792 (Part No.5792)
from
$157.99
The Edelbrock No: 5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
See More
Edelbrock – Edelbrock Cylinder Head Gasket Set, 7329 (Part No.7329)
from
$113.99
“Edelbrock part No: 7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″” bore size, .045″” compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Edelbrock cylinder head will not. This head gasket is graphite with a steel core and has a stainless steel fire ring. Gasket is compatible with cast iron or aluminum cylinder heads.”
See More
Edelbrock – Edelbrock Performer Series Retainer, 9720 (Part No.9720)
from
$103.99
Edelbrock Valve Spring Retainers are made of superior quality steel and are machined and heat treated for maximum strength. They feature a black oxide finish to prevent rust and corrosion
See More
Competition Cams – Competition Cams High Energy Timing Set for ’69-’81 AMC 290-401 V8, 3218 (Part No.3218)
Top Picks for 1972 Jeep Commando Performance Fuel Systems
Upgrade Jeep Commandos with top-quality Performance Fuel Systems parts, including 4 OEM and aftermarket selections for your 1972 model.
K&N – K&N Fuel Filter, PF-1300 (Part No.PF-1300)
from
$20.99
K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
See More
Holley – Holley 2 BBL Carbs, 0-4412S (Part No.0-4412S)
from
$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More
Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Dual Inlet, Shiny, 0-4412BKX (Part No.0-4412BKX)
from
$799.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More
Holley – Holley Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Gold Dichromate, 0-4412C (Part No.0-4412C)
from
$665.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More
In-Demand Performance Ignition Products for 1972 Jeep Commandos
Select from 10 premium Performance Ignition Products parts for your 1972 Jeep Commando, with prices ranging from $35.49 to $204.99.
Mallory – Mallory Unilite Ignition Module, 605 (Part No.605)
from
$99.99
Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.
See More
Accel – Accel Ignition Coil – Yellow – 42000v 1.4 ohm primary – Points – up to 6500 RPM – The 8140 super stock ignition coil is a canister style coil that … (Part No.8140)
from
$49.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Red Wire with Red Straight Boots – 5040R 8mm super stock universal fit spark plug wires feature a spi… (Part No.5040R)
from
$116.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Accel – Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (Part No.8140C)
from
$55.19
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Black Wire with Black Straight Boots – 5040K, Spark Plug Wires, Super Stock, Spiral Core, 8mm, Black,… (Part No.5040K)
from
$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Yellow with Orange Straight Boots – 4040 8mm universal fit super stock spark plug wire sets feature a spiral core… (Part No.4040)
from
$69.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
See More
Accel – Accel Ignition Coil – SuperStock – Breakerless Electronic Coil – Chrome – This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00… (Part No.8145C)
from
$84.29
“Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.”
See More
Accel – Accel Spark Plug Wire Set – 8.8mm-300+ Ferro-Spiral Race – Universal- Vari-Angle Boots – 7040 300+ race wire universal spark plug wire sets have a … (Part No.7040)
from
$187.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.
See More
Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)
from
$35.49
3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory
See More
Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
See More
Most Sold 1972 Jeep Commando Performance Exhaust Products
Explore our best-selling Jeep parts for the 1972 Commando among 1 OEM and aftermarket options starting from $32.99.
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1434 (Part No.1434)
from
$32.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Top-Rated Performance and Racing Products Brands For Your 1972 Jeep Commando
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1972 Jeep Commandos. Below you’ll find some of our best rated Performance and Racing Products from Mallory, K&N, and Accel, and more. Performance and Racing Products from these brands that fit a 1972 Commando start at just $19.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1972 Jeep Commando Performance and Racing Products
When it comes to maintaining or upgrading your 1972 Jeep Commando, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1972 Jeep Commando. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $99.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$99.99
(3)
Mallory Unilite Ignition Module, 605
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular K&N 1972 Jeep Commando Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1972 Jeep Commando owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1972 Commando, Advance Auto Parts carries a full inventory of 2 K&N Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these K&N Performance and Racing Products range from $19.99 to $20.99, plus, with more than 10 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$20.99
(1)
K&N Fuel Filter, PF-1300
“I believe the construction and overall quality of the K&N fuel filter is much better than one that can be purchased at a local auto parts store”
from
$19.99
(9)
K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2003
“5 Star Review”
FAQs for 1972 Jeep Commando Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1972 Jeep Commandos?
Out of 40 Performance and Racing Products that fit 1972 Jeep Commandos, the following parts are the top sellers:
- Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (17360031) – $31.99
- Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (5024277) – $55.19
- Edelbrock Signature Series Valve Covers, 4431 (5026997) – $79.99
What’s the price range for 1972 Jeep Commando Performance and Racing Products?
Performance and Racing Product prices for the 1972 Jeep Commando start at $19.99 and go up to $799.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1972 Jeep Commando?
The average price for Performance and Racing Products for the 1972 Jeep Commando is $180.93. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Commando model years?
What are the cheapest Performance and Racing Products for my 1972 Jeep Commando?
The cheapest 1972 Jeep Commando Performance and Racing Products we carry in stock are:
- K&N Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine, HP-2003 (6120011) – $19.99
- K&N Fuel Filter, PF-1300 (11405576) – $20.99
- Mr. Gasket High Performance Thermostat – 160 Degree Brass & Copper, 4363 (17360031) – $31.99
- FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1434 (19781842) – $32.99
- Energy Suspension Sway Bar Bushing Set, 2.5101G (22907199) – $34.49
What are the top-rated Performance and Racing Products that fit the 1972 Jeep Commando?
Out of 780 reviews by customers, our 1972 Jeep Commando Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1972 Jeep Commando and their top-rated products:
- Performance Fuel Systems
- K&N Fuel Filter, PF-1300 (11405576) – $20.99
- Performance Oil Filters
- K&N Fuel Filter, PF-1300 (11405576) – $20.99
What types of Performance and Racing Products do you sell for my 1972 Jeep Commando?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1972 Jeep Commando:
Can I get help with 1972 Jeep Commando Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Commando Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Commando Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
