1972 GMC K15/K1500 Suburban Differentials

Essential 1972 GMC K15/K1500 Suburban Differentials

Pro-King – Differential Internal Nest Kit (Part No.742J717)

Differential Internal Nest Kit

from

$219.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Zip Locker Front Switch Cover (Part No.34009)

Zip Locker Front Switch Cover

from

$7.99
ZIP locker front switch cover.

Product Features:
  • Cover for switch
  • Front
See More

Yukon Gear – 4340 Chrome-Moly Left Hand Inner Axle For ’69-’80 GM Blazer And Truck, Dana 44, 5-760X U/J (Part No.21372)

4340 Chrome-Moly Left Hand Inner Axle For '69-'80 GM Blazer And Truck, Dana 44, 5-760X U/J

from

$289.99
Yukon 4340 Chrome-Moly left hand inner replacement axle for ’69-’80 GM Blazer and truck, Dana 44 with a length of 36.13″ and 30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Fits 1969-1980 GM half ton front
  • 4340 Chromoly
  • Left hand side inner
  • 30 spline
  • 36.13″ from end of splines to center of u-joint bore
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)

Pinion Install Kit For Dana 60 Rear Differential

from

$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Replacement Standard Carrier Case For Dana Spicer 60, 4.10 And Down (Part No.20030)

Replacement Standard Carrier Case For Dana Spicer 60, 4.10 And Down

from

$299.99
Product Features:
  • Fits Dana Spicer 60
  • 4.10 ratio and down only
  • Fits standard open differentials only
See More

USA Standard Gear – Open Spider Gear Set For Dana Spicer 44, 30 Spline (Part No.39006)

Open Spider Gear Set For Dana Spicer 44, 30 Spline

from

$203.99
Product Features:
  • Spider gear kit
  • Fit Dana Spicer 44 open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Motive Gear – Differential Pinion Seal (Part No.5778)

Differential Pinion Seal

from

$9.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-551)

Differential Pinion Yoke Assembly

from

$232.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

National – Bearings (Part No.HM89449)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPGM12)

Differential Cross Shaft

from

$27.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

National – Shaft Repair Sleeve (Part No.99199)

Shaft Repair Sleeve

from

$37.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)

Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles

from

$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Differential (Part No.29101)

Differential

from

$271.99
Differential

Yukon Gear – Pinion Nut Washer (Part No.33166)

Pinion Nut Washer

from

$23.99
Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

Product Features:
  • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
See More

USA Standard Gear – Steel Spool For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.59017)

Steel Spool For Dana 60 With 30 Spline Axles, 4.56 & Up

from

$369.99
Product Features:
  • Fits Chrysler Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1018-B)

RngPnnInstlKt

from

$39.49
RngPnnInstlKt

Motive Gear – Differential Ring and Pinion (Part No.GM12-373X)

Differential Ring and Pinion

from

$226.99


Product Features:
  • GM 12BL 8.875 R/P 3.73 THICK MG
See More

Pro-King – Differential Pinion Gear Washer (Part No.742G216)

Differential Pinion Gear Washer

from

$2.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Oil Seal (Part No.S-471424)

Oil Seal

from

$4.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Star Washer For GM 12 Bolt Posi Cross Pin Bolt (Part No.33348)

Star Washer For GM 12 Bolt Posi Cross Pin Bolt

from

$5.99
Star washer for GM 12 bolt posi cross pin bolt.

Product Features:
  • Star washer
  • Fits GM 12 bolt passenger car
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

from

$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:
  • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
See More

Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM

from

$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

Product Features:
  • Axle Redi-sleeve
  • Fits Dana Spicer 44
See More

Yukon Gear – Standard Open And Positraction Cross Pin Shaft For GM 12T, 12P, And 55T (Part No.33406)

Standard Open And Positraction Cross Pin Shaft For GM 12T, 12P, And 55T

from

$23.99
Standard Open and positraction cross pin shaft for GM 12T, 12P, and 55T.

Product Features:
  • Cross pin shaft for GM 12 bolt passenger car and truck
  • Fits standard open and positraction applications
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)

Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed)

from

$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60 and 70
  • Powr Lok positraction only
See More

Popular 1972 GMC K15/K1500 Suburban Differentials Categories

1972 GMC K15/K1500 Suburban Differentials

Maybe you’re in the middle of a full rebuild of that 1972 GMC K15/K1500 Suburban. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 396 different Differentials in our inventory ranging from $0.91 to $1,674.99. That means you can find the exact parts or products you need to keep that 1972 GMC K15/K1500 Suburban running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1972 GMC K15/K1500 Suburban. Valvoline, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1972 GMC K15/K1500 Suburban, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 6,120 reviews in this category, some of the top rated parts include Bearings with 4.5 stars and Differential Ring And Pinion with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1972 GMC K15/K1500 Suburban rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1972 GMC K15/K1500 Suburban Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 GMC K15/K1500 Suburban demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K15/K1500 Suburban the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 1972 GMC K15/K1500 Suburban Differentials

What are the most purchased Differentials for the 1972 GMC K15/K1500 Suburban?

Out of 396 Differentials for the 1972 GMC K15/K1500 Suburban, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Bearings
from $15.99
(9)
Bearings
Front Differential Pinion Bearings
Axle Housing Cover Gasket
from $6.49
(10)
Axle Housing Cover Gasket
Rear Housing Cover Gaskets

What are the top-rated 1972 GMC K15/K1500 Suburban Differentials?

Top-rated Differentials for your 1972 GMC K15/K1500 Suburban based on customer reviews/ratings are:
Bearings
from $9.99
(8)
Bearings
“Fit like a glove. Sealed up the diff like mighty putty on steroids”
Differential Ring And Pinion
from $350.99
(7)
Differential Ring And Pinion
“Great spark plugs.”
Bearings
from $10.49
(4)
Bearings
“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”