1972 GMC K15/K1500 Pickup Fuel and Emissions Systems
More 1972 GMC K15/K1500 Pickup Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1972 GMC K15/K1500 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1972 GMC K15/K1500 Pickup Fuel and Emissions Systems
Carquest Premium – Fuel Tank Lock Ring (Part No.LR3000)
from
$9.99
CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.
Product Features:
See More
Product Features:
- Precision stamped for perfect fit and pump position
- Always replace lock ring as a part of fuel pump service
Delphi – Fuel Tank Lock Ring (Part No.FA10009)
from
$28.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi lock rings are designed to meet or exceed the performance of the original unit
- Made out of steel to endure harsh conditions
- Each lock ring is application specific to ensure the fuel system is locked in and seals properly
- Always consider replacing the lock ring as a part of fuel pump service
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)
from
$16.99
Mr. Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.
Product Features:
See More
Product Features:
- Precision Cut To Cover Pump
- Gasket Included
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.160572)
from
$23.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Holley – Mechanical Fuel Pump (Part No.12-454-20)
from
$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170 gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- 3/4in.-16 Inlet And Outlet Ports
- Fittings Not Included
Carquest Premium – Fuel Tank Sending Unit FG05DCQ: Includes Wiring Harness (Part No.FG05DCQ)
from
$93.99
Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- All sending units are 100% performance tested
- Includes installation gaskets or seals where applicable
KAI – Fuel Sending Unit (Part No.FSU010190)
from
$64.99
New Platinum Pro Fuel Sending Unit, With 5/16 Line, With Lock Ring/Seal/O-Ring And Strainer
Product Features:
See More
Product Features:
- 5/16 Line Lock Ring/Seal/O-Ring And Strainer
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Locking Fuel Cap (Part No.10583)
from
$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap: 10806, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10806)
from
$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Pump Push Rod PR2584015 (Part No.PR2584015)
from
$20.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Carquest Premium – Fuel Pump Push Rod (Part No.FP936)
from
$16.99
CARQUEST fuel pump push rods are precision machined from hardened steel for long life.
Product Features:
See More
Product Features:
- Case hardened for durability and strength
- Precision machined to reduce drag and friction
- Designed to meet or exceed OE specifications
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$20.99
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
Spectra Premium – Fuel Tank (Part No.GM49C)
from
$299.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Spectra Premium – Fuel Tank (Part No.GM49A)
from
$328.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Dorman – Fuel Tank With Lock Ring And Seal (Part No.576-091)
from
$341.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)
Popular 1972 GMC K15/K1500 Pickup Fuel and Emissions Systems Categories
1972 GMC K15/K1500 Pickup Fuel and Emissions Systems
You count on your 1972 GMC K15/K1500 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 26 Fuel and Emissions Systems ranging in price from $2.99 to $303.99, you’re sure to find everything you need for your 1972 GMC K15/K1500 Pickup.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 11 different brands like Felpro, Carquest Premium, and Delphi. 1972 GMC K15/K1500 Pickup Fuel and Emissions Systems start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 1,054 extensive product reviews on 1972 GMC K15/K1500 Pickup Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack with 4.5 stars and Fuel Cap: 10742, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack with 5.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1972 GMC K15/K1500 Pickup below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1972 GMC K15/K1500 Pickup
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 GMC K15/K1500 Pickup running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Delphi, and even more.
Popular Dorman – Help Fuel and Emissions Systems
You’ll find popular Dorman – Help brand products across Fuel Pumps. All are waiting to get your 1972 GMC K15/K1500 Pickup back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1972 GMC K15/K1500 Pickup, and some of our most reviewed parts include:
FAQs for 1972 GMC K15/K1500 Pickup Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1972 GMC K15/K1500 Pickup?
Out of 26 Fuel and Emissions Systems for the 1972 GMC K15/K1500 Pickup, the most popular in our inventory are:
What are the top-rated 1972 GMC K15/K1500 Pickup Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1972 GMC K15/K1500 Pickup based on customer reviews/ratings are:
from
$22.99
(4)
Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack
“Exact fit replacement, no problems what so ever.”
from
$9.99
(1)
Fuel Cap: 10742, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“Bought it to get the rubber gasket out of it for the one with lock. Gasket is a good fit.”
from
$16.99
(1)
Fuel Pump Push Rod
“Replaced a fuel pump push rod on a Marine engine – Crusader CH350 serial number 38020. This is a 454cid big block made by GM and the replacement rod w”
