1972 GMC C15/C1500 Pickup Valve Cover and Cylinder Heads

Essential 1972 GMC C15/C1500 Pickup Valve Cover and Cylinder Heads

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Sure Seat Valve Springs for Chevy 262-400 V8 1957-95

from

$60.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Cylinder Head Dowel Pins

from

$14.99
Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:
  • Precision Machined
  • Case Hardened
  • Give Accurate Alignment
  • 2 Per Set
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7961 SB-1)

Cylinder Head Gasket Set

from

$107.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Premium quality parts you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Dorman – Lock Nut, Type 8, 7/16-20 In., GM (sold by each) (Part No.693-022)

Lock Nut, Type 8, 7/16-20 In., GM (sold by each)

from

$3.49
This engine rocker arm nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine rocker arm nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

Pushrod Set for S/B Chevy

from

$187.99


Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More

Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each) (Part No.570-009)

Rubber Expansion Plug 1-1/2 In. - Size Range 1-1/2 In. - 1-5/8 In. (sold by each)

from

$8.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (sold by each) (Part No.090-046)

Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (sold by each)

from

$1.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Engine Rocker Arm Ball

from

$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

ARP Auto Racing – Hex Style Head, 1.8L Lb Per Square" Tensile Strength, Black Oxide, Chrome Moly (Part No.135-3601)

Hex Style Head, 1.8L Lb Per Square" Tensile Strength, Black Oxide, Chrome Moly

from

$111.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:
  • High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
  • Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
  • Rated At 180,000 PSI Tensile Strength
  • High Performance Head Bolts Are Stronger
See More

Edelbrock – Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum (Part No.4145)

Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum

from

$371.99
The Edelbrock #4145 Classic Series Valve Covers are designed for Chevy 262-400 V8 1959-86 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:
  • Small Block Chevy 262-400 1959-86
  • Tall
  • Polished Aluminum
  • Set Of Two
See More

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Engine Valve Cover Load Spreader Set

from

$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)

Performer Series Retainer (Qty 16)

from

$95.99
Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:
  • Valve Spring Retainers for Use OE Cast Iron Heads
  • Superior Quality Heat-Treated Steel
  • Machined for Strength with Black Oxide Finish
  • Finish Ensures Rust and Corrosion Protection
See More

Edelbrock – Valve Seat for B/B Chevy heads with 2.19" Valves (Part No.9716)

Valve Seat for B/B Chevy heads with 2.19" Valves

from

$22.99
Product Features:
  • 2.19 in.
  • Ductile Iron Material
  • Intake
  • Sold Individually
  • Made In The USA
See More

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16

from

$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 PSI
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • .800″ Adjuster Thread Length
  • 3/8-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
See More

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Engine Valve Spring Retainer Keeper

from

$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Edelbrock – Performer-Plus Hydraulic Flat Tappet Lifters (Part No.9738)

Performer-Plus Hydraulic Flat Tappet Lifters

from

$127.99
Product Features:
  • Replacement Lifters For Performer Cam
  • 50 State Legal
See More

Spectre – Engine Dress Steel Up Kit (Part No.54083)

Engine Dress Steel Up Kit

from

$119.99
Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:
  • For Chevrolet small block 265 and 400
  • Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
  • Designed for use with OE specifications for fit and function
  • Made from high quality material
See More

Felpro – CYLINDER HEAD GASKET SPACER SHIM (Part No.8180 SP-1)

CYLINDER HEAD GASKET SPACER SHIM

from

$23.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Sealed Power – Engine Exhaust Valve (Part No.V-1904)

Engine Exhaust Valve

from

$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Edelbrock – Small-Block Chevy E-Street Cylinder Heads 64cc (Part No.5089)

Small-Block Chevy E-Street Cylinder Heads 64cc

from

$1229.99
The Edelbrock #5089 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:
  • Complete Pair For Hydraulic Flat Tappet
  • 64cc Combustion Chamber Volume
  • 2.02cc Intake/60cc Exhaust Runner Volume
  • 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.562 in. Deck Thickness
See More

Edelbrock – Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Cam (Part No.60499)

Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Cam

from

$1191.99
Product Features:
  • Complete Single For Flat Tappet
  • 100cc Combustion Chamber Volume
  • 290cc Intake/110cc Exhaust Runner Volume
  • 2.19 in. Intake/1.88 in. Exhaust Valve Diameter
  • 0.562 in. Deck Thickness
See More

Mr. Gasket – Mls Head Gasket (Part No.3130G)

Mls Head Gasket

from

$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.060″ Thickness – .040″
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8180 PT-2)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$27.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
See More

Sealed Power – Engine Rocker Arm Kit (Part No.R-826)

Engine Rocker Arm Kit

from

$3.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Complete rocker arm assembly
  • 1 Arm
  • 1 Ball
  • 1 Nut
  • Utilizes ISO & QS certified manufacturing
See More

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Chrome Valve Cover Wing Bolts

from

$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:
  • Fits Chevy V8
  • Standard Y Top 1/4 In-20 X 5/8 in L
  • Chrome Plated Steel
  • Overall Length: 4.64″
  • Installed Length: 4.00″
  • Pack of 4
See More

1972 GMC C15/C1500 Pickup Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 1972 GMC C15/C1500 Pickup. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 89 different Valve Cover and Cylinder Heads in our inventory ranging from $0.30 to $1,575.99. That means you can find the exact parts or products you need to keep that 1972 GMC C15/C1500 Pickup running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1972 GMC C15/C1500 Pickup. Sealed Power, Felpro, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1972 GMC C15/C1500 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 730 reviews in this category, some of the top rated parts include Chrome Valve Cover Wing Bolts with 4.4 stars and Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel with 4.4 stars.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1972 GMC C15/C1500 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 1972 GMC C15/C1500 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 GMC C15/C1500 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your C15/C1500 Pickup the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

Popular Edelbrock Valve Cover and Cylinder Heads

We carry Edelbrock parts in our stock across Engine Valve Springs categories, plus more. For a 1972 GMC C15/C1500 Pickup, our most popular Edelbrock Valve Cover and Cylinder Heads include:
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
from $60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
Engine Valve Springs

FAQs for 1972 GMC C15/C1500 Pickup Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 1972 GMC C15/C1500 Pickup?

Out of 89 Valve Cover and Cylinder Heads for the 1972 GMC C15/C1500 Pickup, the most popular in our inventory are:
Engine Valve Lifter
from $13.99
(15)
Engine Valve Lifter
Engine Valve Lifters
Engine Push Rod
from $2.99
(5)
Engine Push Rod
Push Rods
Engine Rocker Arm Nut
from $0.95
(4)
Engine Rocker Arm Nut
Rocker Arm Nuts

What are the top-rated 1972 GMC C15/C1500 Pickup Valve Cover and Cylinder Heads?

Top-rated Valve Cover and Cylinder Heads for your 1972 GMC C15/C1500 Pickup based on customer reviews/ratings are:
Chrome Valve Cover Wing Bolts
from $15.99
(9)
Chrome Valve Cover Wing Bolts
“good”
Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel
from $56.99
(7)
Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel
“Used to replace my bent up covers easy install bolted right up”
Engine Rocker Arm Kit
from $3.49
(6)
Engine Rocker Arm Kit
“The rocker was what i needed and was hard to find. You guys helped out well and were right in the neighborhood thanks”