1972 Ford Maverick Differentials

Essential 1972 Ford Maverick Differentials

Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)

Ring Gear Bolt

from

$1.99


Product Features:
  • BOLT 9″ FORD OPEN R.G. SAME AS M-4216A200
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R9R28)

Differential Bearing Kit - Koyo

from

$106.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL 9″ 28 SPL 1957-1969
See More

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford

from

$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 9″
  • 3/8″ x 24 thread
  • 1.5″ long
See More

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Trac Loc Clutch Guide For 9" Ford

from

$4.99
Trac Loc clutch guide for 9″ Ford.

Product Features:
  • Clutch guide
  • Fits Ford 8″ and 9″
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)

Trac Loc Spring Plate For Ford 9" & 8"

from

$10.99
Product Features:
  • Trac Loc spring plate for Ford 8″ and 9″
See More

Yukon Gear – Minor Install Kit For Ford 9" Differential (Part No.12036)

Minor Install Kit For Ford 9" Differential

from

$54.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), marking compound and brush.

Product Features:
  • Fits Ford 9″
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Pro-King – Differential Clutch Pack (Part No.763A119)

Differential Clutch Pack

from

$119.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – Grip PRO Traction System (Part No.GT109028)

Grip PRO Traction System

from

$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

3.062" Side Adjuster For Ford 9"

from

$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:
  • Side adjuster
  • Fits Ford 9″
  • 3.062″ designs only
See More

Yukon Gear – Ford 9" Pinion Support, 35 Spline, 10 Hole, No Races Included (Part No.32165)

Ford 9" Pinion Support, 35 Spline, 10 Hole, No Races Included

from

$569.99
Ford 9″ pinion Support, 35 spline, 10 hole, no races included.

Product Features:
  • Fits Ford 9″ with 35 spline pinion
  • Larger inner pinion bearing reduces gear deflection under high load
  • 6061 aluminum
  • 10 bolt holes
  • Does not include races
See More

Yukon Gear – Pinion Depth Shims For Ford 9" With 7/16" Studs (Part No.55057)

Pinion Depth Shims For Ford 9" With 7/16" Studs

from

$76.99
Product Features:
  • Pinion depth shim kit
  • Fits Ford 9″ with 7/16″ pinion support bolts
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

USA Standard Gear – Mini Spool For Ford 9" With 28 Spline Axles (Part No.59022)

Mini Spool For Ford 9" With 28 Spline Axles

from

$59.99
Product Features:
  • Fits Ford 9″ with 28 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – 8" Ford Pilot Bearing Retainer (Part No.33254)

8" Ford Pilot Bearing Retainer

from

$13.99
8″ Ford pilot bearing retainer.

Product Features:
  • Pilot bearing retainer for Ford 8″
See More

Yukon Gear – 8" Dropout Housing Gasket (Part No.23010)

8" Dropout Housing Gasket

from

$11.99
8″ dropout housing gasket.

Product Features:
  • Dropout gasket
  • Fits Ford 8″
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Trac-Loc For Ford 8" Wtih 31 Spline Axles – Street Design (Part No.26004)

Trac-Loc For Ford 8" Wtih 31 Spline Axles - Street Design

from

$819.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8″ with 31 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Smooth design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Differential Carrier Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Standard Open Spider Gear Kit For And 9" Ford With 28 Spline Axles And 4-Pinion Design (Part No.16032)

Standard Open Spider Gear Kit For And 9" Ford With 28 Spline Axles And 4-Pinion Design

from

$315.99
Yukon standard open spider gear kit for and 9″ Ford with 28 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Ford 8″ and 9″ open differential with 28 spline axles
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Pilot Bearing For Ford 8" (Part No.18043)

Pilot Bearing For Ford 8"

from

$40.99
9.25 Chrysler FRONT PINION KIT , 03 & UP DODGE TRUCK .

Product Features:
  • Pilot bearing
  • Fits Ford 8″
See More

Driveworks – Oil Seal (Part No.S-7044NA)

Oil Seal

from

$4.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Motive Gear – Differential Gear Install Kit (Part No.F8IK)

Differential Gear Install Kit

from

$44.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

1972 Ford Maverick Differentials

Maybe you’re in the middle of a full rebuild of that 1972 Ford Maverick. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 357 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1972 Ford Maverick running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Ford Maverick. Driveworks, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1972 Ford Maverick, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 180 reviews in this category, some of the top rated parts include Multi Purpose Seal with 5.0 stars and Differential Crush Sleeve with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1972 Ford Maverick rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1972 Ford Maverick Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Ford Maverick demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Maverick the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1972 Ford Maverick, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

Top 1972 Ford Maverick Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1972 Ford Maverick. Popular Driveworks parts include:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
Oil Seal
from $4.29
(1)
Oil Seal
Differential Pinion Seals

FAQs for 1972 Ford Maverick Differentials

What are the most purchased Differentials for the 1972 Ford Maverick?

Out of 357 Differentials for the 1972 Ford Maverick, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Pinion Crush Sleeves
from $5.99
This product is not rated
Pinion Crush Sleeves
Differential Crush Sleeves
Bearings
from $9.49
This product is not rated
Bearings
Rear Differential Pinion Bearings

What are the top-rated 1972 Ford Maverick Differentials?

Top-rated Differentials for your 1972 Ford Maverick based on customer reviews/ratings are:
Multi Purpose Seal
from $15.79
(3)
Multi Purpose Seal
“good quality”
Differential Crush Sleeve
from $2.49
(1)
Differential Crush Sleeve
“High quality, would buy again”
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
“Installed, no issues, works great.”