1972 Ford F-250 Pickup Exhaust Parts
Find Your Specific 1972 Ford F-250 Pickup Exhaust Parts
Below you will find various in-demand Ford Exhaust Parts, components and accessories for your 1972 F-250 Pickup. Advance Auto Parts has popular F-250 Pickup parts like Exhaust Fittings, Exhaust Manifold and Headers, Exhaust Gaskets and more. You’ll also find aftermarket and OEM Exhaust Parts for other F-250 Pickup model years including
1989,
1990,
1991,
1992,
1993,
1994,
1995,
1996,
1997 and more. Select a category of 1972 Ford F-250 Pickup Exhaust Parts below and start saving instantly.
Popular 1972 Ford F-250 Pickup Exhaust Parts Categories
Essential Exhaust Parts for 1972 Ford F-250 Pickups
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 2.5" Inlet (ID) 2" Outlet (ID) (Part No.43299)
from
$229.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042541)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Exhaust Flange (Part No.31806)
from
$13.49
Complete your exhaust repair with Walker¿flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes¿for¿a quality vehicle repair
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes┐for┐a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE ¿ Designed to support undercar exhaust components
- KEEPS EXHAUST PARTS IN PLACE ┐ Designed to support undercar exhaust components
- OE-STYLE DESIGN ¿ Designed with OE-style features for easy installation
- OE-STYLE DESIGN ┐ Designed with OE-style features for easy installation
- QUALITY MATERIALS¿–¿Made from quality material for durability and¿long life¿
- QUALITY MATERIALS┐–┐Made from quality material for durability and┐long life┐
- BETTER TOGETHER¿–¿Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade¿
- BETTER TOGETHER┐–┐Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade┐
Walker – Exhaust Flange (Part No.31801)
from
$13.49
Complete your exhaust repair with Walker¿flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes¿for¿a quality vehicle repair
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes┐for┐a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE ¿ Designed to support undercar exhaust components
- KEEPS EXHAUST PARTS IN PLACE ┐ Designed to support undercar exhaust components
- OE-STYLE DESIGN ¿ Designed with OE-style features for easy installation
- OE-STYLE DESIGN ┐ Designed with OE-style features for easy installation
- QUALITY MATERIALS¿–¿Made from quality material for durability and¿long life¿
- QUALITY MATERIALS┐–┐Made from quality material for durability and┐long life┐
- BETTER TOGETHER¿–¿Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade¿
- BETTER TOGETHER┐–┐Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade┐
Walker – Tail Pipe Aluminized 50.625" (Part No.45454)
from
$79.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe 2.5" Inlet (ID) 2.5" Outlet (OD) (Part No.42596)
from
$24.29
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
BRExhaust – Direct-Fit Replacement Exhaust System (Part No.106-0684)
from
$421.99
BRExhaust Direct-Fit Replacement Exhaust Kit 106-0684 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0684¿s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0684 features durable aluminized steel construction and is covered by a 2 year warranty. BRExhaust 106-0684 is engineered for OEM F4TZ5A212M, F5TZ5230ASA, F75Z5230KA exhaust replacement.
Product Features:
See More
Product Features:
- Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
- Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
- All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
MAHLE Original – Exhaust Pipe Flange Gasket (Part No.GS33716)
from
$17.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Exhaust pipe gaskets from MAHLE Original are manufactured with the best materials to withstand high temperature applications.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Exhaust Pipe Flange Gasket (Part No.31405)
from
$15.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Manifold Heat Shield Set (Part No.MS 95000)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Heat Shield Set (Part No.MS 90248)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5930)
from
$37.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10206-01)
from
$12.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7161)
from
$60.29
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
Felpro – EXHAUST MANIFOLD BOLT SET (Part No.ES 75118)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03412)
from
$36.49
Dorman’s Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
BRExhaust – Exhaust Clamp (Part No.250-058)
from
$6.49
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
- Perfect, gas-tight performance
- Exhaust accessory that facilitates a complete installation process.
- Built to OEM specifications
Walker – Exhaust Clamp (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-406)
from
$145.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Exhaust Manifold Kit (Part No.H1000683338DOR)
from
$138.30
More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.
Product Features:
See More
Product Features:
- Heat-shield may be included for protection of engine components where applicable
- Cast iron or stainless tubular construction protects against warping or cracking
- Leak-resistant for long-lasting performance
- A rigorous quality inspection has been undertaken to ensure product standards
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-174)
from
$303.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
JBA Performance – 1627SJS 1 1/2" Header Shorty Stainless Steel 87-95 Ford Truck 5.0L Silver Ceramic (Part No.1627SJS)
from
$699.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1627SJS 1 1/2″ Header Shorty Stainless Steel 87-95 Ford Truck 5.0L Silver Ceramic
- Mandrel bent stainless steel tube
Hooker Headers – Super Comp. Header (Part No.6811HKR)
from
$870.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Upgrade your 1972 Ford F-250 Pickup with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1972 Ford F-250 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Exhaust Parts are key to keeping your F-250 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 33 Exhaust Parts for the 1972 Ford F-250 Pickup, designed to meet your needs without breaking the bank.
From
Exhaust Fitting
replacements to
Exhaust Manifold and Headers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1972 Ford F-250 Pickup at great prices.
Our Exhaust Parts inventory for this model
ranges from just $1.99 to $870.99, with
an average price of $130.77.
Our 33 Exhaust Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1972 Ford F-250 Pickup without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1972 Ford F-250 Pickup, we stock popular OEM and aftermarket Exhaust Parts from top names
like FELPRO, Mr. Gasket, Flowtech, and more.
FELPRO Exhaust Parts
start at just $2.99 and boast an impressive 5 stars average rating from customers.
Mr. Gasket and Flowtech also bring quality to the table, with Exhaust Parts available starting at $37.49, and at an average 4 stars rating.
With 280 customer reviews and counting, our 1972 Ford F-250 Pickup Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1972 Ford F-250 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Pickup in top shape, all in one place.
Start shopping confidently below for your 1972 Ford F-250 Pickup!
Best-Selling Exhaust Fittings for 1972 Ford F-250 Pickups
Enhance the driving experience in your Ford with 4 quality Exhaust Fitting components, starting at $1.99.
Walker – Exhaust Flange (Part No.31801)
from
$13.49
Complete your exhaust repair with Walker¿flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes¿for¿a quality vehicle repair
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes┐for┐a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE ¿ Designed to support undercar exhaust components
- KEEPS EXHAUST PARTS IN PLACE ┐ Designed to support undercar exhaust components
- OE-STYLE DESIGN ¿ Designed with OE-style features for easy installation
- OE-STYLE DESIGN ┐ Designed with OE-style features for easy installation
- QUALITY MATERIALS¿–¿Made from quality material for durability and¿long life¿
- QUALITY MATERIALS┐–┐Made from quality material for durability and┐long life┐
- BETTER TOGETHER¿–¿Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade¿
- BETTER TOGETHER┐–┐Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade┐
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Most Popular 1972 Ford F-250 Pickup Exhaust Manifold and Headers
Customize your Ford with 9 Exhaust Manifold and Headers products
like Exhaust Manifold and Headers,
Exhaust Manifold and Header Hardware, and
Exhaust Manifold Heat Shield Sets, all
priced under $870.99.
Flowtech – Standard Header (Part No.12540FLT)
from
$244.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-173)
from
$213.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Felpro – Exhaust Manifold Heat Shield Set (Part No.MS 95000)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
Hooker Headers – Super Comp. Header (Part No.6823HKR)
from
$870.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Competition Header (Part No.6903-1HKR)
from
$737.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Flowtech – Ceramic Header (Part No.32542FLT)
from
$585.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – Competition Header (Part No.6905HKR)
from
$394.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Flowtech – Standard Header (Part No.12542FLT)
from
$289.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Top Picks for 1972 Ford F-250 Pickup Exhaust Gaskets
Upgrade Ford F-250 Pickups with top-quality Exhaust Gaskets parts, including 11 OEM and aftermarket selections for your 1972 model.
Mr. Gasket – Aluminum Exhaust Gasket (Part No.7410G)
from
$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.
Product Features:
See More
Product Features:
- Reusable header, exhaust manifold and collector flange gaskets
- Manufactured from “dead soft” aluminum layers – .125″ thick
- Conforms easily to surface irregularities (warped flanges)
- Compresses down to 0.060″ to create a tight leak-proof seal
- Will not shrink, deteriorate, or blow out- eliminating gasket leaks
- For high performance street, drag race and oval track use
Felpro – INTAKE & EXHAUST MANIFOLD GASKET SET (Part No.MS 90157-1)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
Felpro – Exhaust Manifold Gasket Set (Part No.MS 9812)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5930)
from
$37.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66014)
from
$51.99
Seal-4-Good Header Flange Gasket
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90000)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7160)
from
$60.29
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7229)
from
$31.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.40 in. x 2.04 in. Port Size
- For 390-428 FE Ford V8
- Gray Color
- Two Piece Configuration
Taylor Gaskets – Header Gasket (Part No.66091)
from
$48.99
Header Gasket
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66053)
from
$48.99
Seal-4-Good Header Flange Gasket
Mr. Gasket – Intake Manifold Gasket (Part No.22300G)
from
$37.59
Thickness: .093 inch, Port Size: 1.40 inch x 2.25 inch
Product Features:
See More
Product Features:
- Large Port Intake Manifold Gasket Set for Small Block Ford Windsor
- Ideal for Use w/ Holley Hi-Ram Intake Manifold for Ford 351W Engines
- Fits Ford 260-351W/TFS/GT-40/N Cylinder Heads
- Ideal For Use w/Holley 351W Ram Intake Manifolds
- Skin Packaged: Suitable For Retail Display
In-Demand Exhaust Pipes for 1972 Ford F-250 Pickups
Select from 7 premium Exhaust Pipes parts for your 1972 Ford F-250 Pickup, with prices ranging from $2.99 to $41.99.
Felpro – Exhaust Pipe Flange Gasket (Part No.60985)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.9998)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Exhaust Tail Pipe 2" Inlet (OD) 2" Outlet (OD) (Part No.46326)
from
$40.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Felpro – Exhaust Pipe Flange Gasket (Part No.60987)
from
$3.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Exhaust Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.42371)
from
$41.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe Flange Gasket (Part No.31405)
from
$15.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Most Sold 1972 Ford F-250 Pickup Exhaust Mufflers
Explore our best-selling Ford parts for the 1972 F-250 Pickup among 1 OEM and aftermarket options starting from $58.99.
BRExhaust – Premium Universal Muffler (Part No.100-1785)
from
$58.99
This BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.
See More
Top-Rated Exhaust Parts Brands For Your 1972 Ford F-250 Pickup
Shop for the best-rated brands offering Exhaust Parts and other products for your 1972 Ford F-250 Pickups. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Mr. Gasket, and Flowtech, and more. Exhaust Parts from these brands that fit a 1972 F-250 Pickup start at just $2.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 1972 Ford F-250 Pickup Exhaust Parts
When it comes to maintaining or upgrading your 1972 Ford F-250 Pickup, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 1972 Ford F-250 Pickup. With over 8 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99, with an average price of just $15.15. Plus, with over 44 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$5.29
$5.29
(10)
“These items fit the application perfectly and sealed the exhaust pipe flange to manifold correctly.”
Popular Mr. Gasket 1972 Ford F-250 Pickup Exhaust Parts
Mr. Gasket auto parts is one of the highest quality Exhaust Part brands in the market. Any 1972 Ford F-250 Pickup owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1972 F-250 Pickup, Advance Auto Parts carries a full inventory of 4 Mr. Gasket Exhaust Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Mr. Gasket Exhaust Parts range from $37.49 to $60.29, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
FAQs for 1972 Ford F-250 Pickup Exhaust Parts
Which Exhaust Parts are best-sellers for 1972 Ford F-250 Pickups?
Out of 33 Exhaust Parts that fit 1972 Ford F-250 Pickups, the following parts are the top sellers:
- Exhaust Pipe Flange Gasket (5185238) – $2.99
- INTAKE & EXHAUST MANIFOLD GASKET SET (5184487) – $25.99
- Exhaust Manifold Gasket Set (5184320) – $25.99
What’s the price range for 1972 Ford F-250 Pickup Exhaust Parts?
Exhaust Part prices for the 1972 Ford F-250 Pickup start at $1.99 and go up to $870.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1972 Ford F-250 Pickup?
The average price for Exhaust Parts for the 1972 Ford F-250 Pickup is $130.77. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Ford F-250 Pickup model years?
What are the cheapest Exhaust Parts for my 1972 Ford F-250 Pickup?
The cheapest 1972 Ford F-250 Pickup Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012223) – $1.99
- Exhaust Clamp (11012137) – $2.49
- Exhaust Pipe Flange Gasket (5185076) – $2.99
- Exhaust Pipe Flange Gasket (5185238) – $2.99
- Exhaust Pipe Flange Gasket (5184991) – $3.99
What are the top-rated Exhaust Parts that fit the 1972 Ford F-250 Pickup?
Out of 280 reviews by customers, our 1972 Ford F-250 Pickup Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1972 Ford F-250 Pickup and their top-rated products:
- Exhaust Tips
- Terminator; Exhaust Tips (19310030) – $85.99
- Exhaust Gaskets
- Terminator; Exhaust Tips (19310030) – $85.99
What types of Exhaust Parts do you sell for my 1972 Ford F-250 Pickup?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 1972 Ford F-250 Pickup:
Can I get help with 1972 Ford F-250 Pickup Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Exhaust Parts and more.
What is your return policy for Ford F-250 Pickup Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Ford F-250 Pickup Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
