1972 Chevrolet Brookwood Differentials

Essential 1972 Chevrolet Brookwood Differentials

Motive Gear – Differential Crush Sleeve (Part No.1234726)

Differential Crush Sleeve

from

$4.29
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Yukon Gear – Star Washer For GM 12 Bolt Posi Cross Pin Bolt (Part No.33348)

Star Washer For GM 12 Bolt Posi Cross Pin Bolt

from

$5.99
Star washer for GM 12 bolt posi cross pin bolt.

Product Features:
  • Star washer
  • Fits GM 12 bolt passenger car
See More

Driveworks – Oil Seal (Part No.S-8611N)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-456A)

Differential Ring and Pinion

from

$175.99


Product Features:
  • GM 10BL 8.5 R/P 4.56A MG FRT/REAR
See More

ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

from

$40.49
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

Product Features:
  • Forged From Premium Grade 8740 Chrome Moly Steel
  • Heat Treated
  • Nominally Rated At 200,000 Psi Tensile Strength
  • Specially Hardened, Precision Ground Washers
  • 3/8″-24 RH Thread Size
  • 0.8″ Underhead Length
  • 200,000 PSI
See More

Powertrax – No-Slip Traction System (Part No.9207853005)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI)

    Differential Carrier Gear Kit

    from

    $111.99


    Product Features:
    • GM10 BOLT 8.5″ 28 SPL INTERNAL KIT (OPEN)
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1101)

    Differential Carrier Shim Kit

    from

    $8.49
    High-quality Differential Carrier Shim Kit

    Product Features:
    • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
    See More

    National – Shaft Repair Sleeve (Part No.99170)

    Shaft Repair Sleeve

    from

    $41.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1104)

    Differential Pinion Shim Kit

    from

    $12.99


    Product Features:
    • KIT SHIM
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1100)

    Differential Pinion Shim Kit

    from

    $7.49
    High-quality Differential Component Shim

    Product Features:
    • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
    See More

    Powertrax – Grip LS Traction System (Part No.LS231230)

    Grip LS Traction System

    from

    $480.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Powertrax – No-Slip Traction System (Part No.9204603500)

    No-Slip Traction System

    from

    $565.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    USA Standard Gear – 4340 Chrome-Moly Replacement Axle Kit For ’69-’80 GM Truck & Blazer, Dana 44 With Spicer (Part No.35069)

    4340 Chrome-Moly Replacement Axle Kit For '69-'80 GM Truck & Blazer, Dana 44 With Spicer

    from

    $1002.99
    USA Standard 4340 Chrome-Moly replacement axle kit for ’69-’80 GM Truck & Blazer, Dana 44 w/Spicer U/Joints.

    Product Features:
    • 30 spline inner and 19 spline outer
    • Fits Dana Spicer 44 in 1969-1980 GM 1/2 ton
    • Includes inner and outer 4340 Chromoly axles and Spicer U-Joints
    See More

    Motive Gear – Differential Mini Spool (Part No.MS10-28)

    Differential Mini Spool

    from

    $98.99


    Product Features:
    • MINI SPOOL GM 10 BOLT 8 1/2″ 28 SPLINE
    See More

    Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

    Differential Mini Spool

    from

    $124.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Powertrax – No-Slip Traction System (Part No.9204443000)

    No-Slip Traction System

    from

    $530.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Powertrax – No-Slip Traction System (Part No.9207883005)

    No-Slip Traction System

    from

    $551.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mr. Gasket – Differential Gasket (Part No.84B)

    Differential Gasket

    from

    $15.99
    Precision cut and high quality materials. Reusable.

    Product Features:
    • Precision cut
    • High-quality materials
    • Reusable
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55029)

    Differential Cover Gasket

    from

    $7.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Differential Spool (Part No.FS10-28)

    Differential Spool

    from

    $187.99


    Product Features:
    • FULL SPOOL GM 10 BOLT 8.5 28 SPL ST
    See More

    Richmond Gear – Differential Spool (Part No.81-1033-1)

    Differential Spool

    from

    $267.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

    Drive Shaft Pinion Yoke

    from

    $117.99


    Product Features:
    • PINION YOKE
    • CAST:1310
    • U-BOLT STYLE
    See More

    Powertrax – Grip LOK Traction System (Part No.LK444430)

    Grip LOK Traction System

    from

    $658.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    1972 Chevrolet Brookwood Differentials

    Maybe you’re in the middle of a full rebuild of that 1972 Chevrolet Brookwood. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 63 different Differentials in our inventory ranging from $2.49 to $1,002.99. That means you can find the exact parts or products you need to keep that 1972 Chevrolet Brookwood running smoothly.

    Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Chevrolet Brookwood. Motive Gear, Felpro, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1972 Chevrolet Brookwood, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 348 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 4.7 stars and Differential Pinion Shim Kit with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1972 Chevrolet Brookwood rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1972 Chevrolet Brookwood Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Chevrolet Brookwood demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Brookwood the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1972 Chevrolet Brookwood, our most popular Driveworks Differentials include:
    Oil Seal
    from $6.29
    (1)
    Oil Seal
    Differential Pinion Seals

    Top 1972 Chevrolet Brookwood Differentials from Motive Gear

    Motive Gear products are another trusted brand when it comes to Differentials for your 1972 Chevrolet Brookwood. Popular Motive Gear parts include:
    Differential Ring and Pinion
    from $241.99
    (4)
    Differential Ring and Pinion
    Differential Ring and Pinions
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    Differential Carrier Shim Kits
    Differential Ring and Pinion
    from $235.99
    (2)
    Differential Ring and Pinion
    Differential Ring and Pinions

    FAQs for 1972 Chevrolet Brookwood Differentials

    What are the most purchased Differentials for the 1972 Chevrolet Brookwood?

    Out of 63 Differentials for the 1972 Chevrolet Brookwood, the most popular in our inventory are:
    Ring Gear Bolt
    from $2.49
    This product is not rated
    Ring Gear Bolt
    Differential Ring Gear Bolts
    Differential Cover Gasket
    from $7.49
    (6)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Multi Purpose Seal
    from $12.29
    (2)
    Multi Purpose Seal
    Differential Pinion Seals

    What are the top-rated 1972 Chevrolet Brookwood Differentials?

    Top-rated Differentials for your 1972 Chevrolet Brookwood based on customer reviews/ratings are:
    Differential Ring And Pinion
    from $282.99
    (7)
    Differential Ring And Pinion
    “as described worked okay.”
    Differential Pinion Shim Kit
    from $7.49
    (1)
    Differential Pinion Shim Kit
    “good product”
    Differential Pinion Seal
    from $3.49
    (1)
    Differential Pinion Seal
    “Correct seal for 64-69 GTO with factory installed axle”