Name: Hydraulic Roller Lifter Kit for 1987 and Later Big-Block Chevys
Brand: Edelbrock
SKU: 97384
Price: 298.99 USD

from

$298.99

Edelbrock part #97384 high performance hydraulic roller lifters for 1987 and later small-block Chevys are the perfect match for Edelbrock Rollin’ Thunder hydraulic roller cams. The Edelbrock Part #97384 are a drop-in replacement for 1987 and later blocks

Product Features:

For Small Block Chevy (1987-Later)
Without Tie Bar
.75 To 1 Turn Of Preload Is Recommended
Set of 16
Made In The USA

from

$119.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 PSI Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$128.99

Product Features:

Provides excellent sealing and conformability
Releases+N747 clean without sticking, if the engine needs to be disassembled
Perfect companion for Edelbrock cylinder heads and intake manifolds
Does not include end seals
Use of a silicone sealant in place of end seal is recommended

from

$27.99

The Edelbrock #4414 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Product Features:

Not For Center Bolt Covers
Steel Material
For Big-Block Chevy
Chrome Finish
Set of 7

from

$3.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Ball
1 Nut
Utilizes ISO & QS certified manufacturing

from

$15.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:

Fits Chevy V8
Standard Y Top 1/4 In-20 X 5/8 in L
Chrome Plated Steel
Overall Length: 4.64″
Installed Length: 4.00″
Pack of 4

from

$95.99

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

Valve Spring Retainers for Use OE Cast Iron Heads
Superior Quality Heat-Treated Steel
Machined for Strength with Black Oxide Finish
Finish Ensures Rust and Corrosion Protection

from

$0.30

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$3.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$0.65

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$22.99

Product Features:

2.19 in.
Ductile Iron Material
Intake
Sold Individually
Made In The USA

from

$14.99

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$64.19

These are high quality nuts with allen set screws to provide you with that positive lock needed for Race or original equipment Rocker Arms.

Product Features:

They Are Zinc Dichromate Plated Steel
They Have Black Oxide Coated Set Screws
Keeps Rocker Arms Positively Locked
(16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
Includes Locks and Hex Wrench
Shank O.D. .603″

from

$1268.99

The Edelbrock #5073 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:

Complete Pair For Hydraulic Flat Tappet
70cc Combustion Chamber Volume
2.02cc Intake/60cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$316.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$14.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

from

$14.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$119.99

Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:

For Chevrolet small block 265 and 400
Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
Designed for use with OE specifications for fit and function
Made from high quality material

from

$0.95

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$3.49

This engine rocker arm nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine rocker arm nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Manufactured for the repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$80.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$253.99

Product Features:

Non-Rotator
1.500 in. Outside Diameter
1.082 in. Inside Diameter
1.340 in. Coil Blind
Set of 16

from

$151.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$185.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$78.99

The Edelbrock #4480 Signature Series Valve Covers are designed for Chevrolet 396-502 V8 ’65 & later applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Big Block Chevy 396-502 1965 & Up
Short
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$371.99

The Edelbrock #4145 Classic Series Valve Covers are designed for Chevy 262-400 V8 1959-86 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:

Small Block Chevy 262-400 1959-86
Tall
Polished Aluminum
Set Of Two

1972 Chevrolet Blazer Valve Cover and Cylinder Heads

More 1972 Chevrolet Blazer Valve Cover and Cylinder Heads

Essential 1972 Chevrolet Blazer Valve Cover and Cylinder Heads

Edelbrock – Hydraulic Roller Lifter Kit for 1987 and Later Big-Block Chevys (Part No.97384)

ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet (Part No.7361)

Edelbrock – Hold-Down Tab Kits for Big-Block Chevy 5" long (Qty 7) (Part No.4414)

Sealed Power – Engine Rocker Arm Kit (Part No.R-826)

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-138)

Sealed Power – Engine Push Rod (Part No.RP-3103)

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Edelbrock – Valve Seat for B/B Chevy heads with 2.19" Valves (Part No.9716)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.920G)

Edelbrock – Small-Block Chevy E-Street Cylinder Head 70cc Pair (Part No.5073)

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

Sealed Power – Engine Exhaust Valve (Part No.V-4345)

Sealed Power – Engine Intake Valve (Part No.V-4344)

Spectre – Engine Dress Steel Up Kit (Part No.54083)

Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)

Dorman – Lock Nut, Type 8, 7/16-20 In., GM (sold by each) (Part No.693-022)

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9521 PT)

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.7733 PT-2)

Edelbrock – Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8 (Part No.5862)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8 (Part No.5895)

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Dorman – Valve Covers: With Gasket, Direct Replacement, Stamped Steel, Passenger Side (Part No.264-986)

Edelbrock – Signature Series Valve Covers: Big Block Chevy 396-502 1965 & Up, Chrome Steel (Part No.4480)

Edelbrock – Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum (Part No.4145)

Popular 1972 Chevrolet Blazer Valve Cover and Cylinder Heads Categories

1972 Chevrolet Blazer Valve Cover and Cylinder Heads

Valve Cover and Cylinder Heads Brands To Make Your 1972 Chevrolet Blazer Last

Popular Edelbrock Valve Cover and Cylinder Heads

Top 1972 Chevrolet Blazer Valve Cover and Cylinder Heads from Felpro

FAQs for 1972 Chevrolet Blazer Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 1972 Chevrolet Blazer?

What are the top-rated 1972 Chevrolet Blazer Valve Cover and Cylinder Heads?