1971 Plymouth Fury Drivetrains
More 1971 Plymouth Fury Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1971 Plymouth Fury, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1971 Plymouth Fury Drivetrains
Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts (Part No.32282)
from
$251.99
Yukon replacement trail repair kit for Dana 60 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 1310 u-joint size
- Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker
Yukon Gear – Dura Grip For Chrysler 9.25" Rear (Part No.26019)
from
$829.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
National – Multi Purpose Seal (Part No.9376)
from
$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)
from
$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Powr Lok button kit
- Fits Dana Spicer 30, 44 and Chrysler 8.75″
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)
from
$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.
Product Features:
See More
Product Features:
- c-clip for Chrysler 9.25″ rear
- 0.205″ thick
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Yukon Gear – Bearing Race Driver (Part No.56015)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88610 race
- All steel construction
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)
from
$14.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)
from
$198.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 60, 35 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)
from
$84.99
Standard Open notched cross pin shaft for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Chrysler 9.25″
- Standard open carrier only
- Notched
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
Yukon Gear – Side Gear And Thrust Washer For 7.25" Chrysler (Part No.33279)
from
$69.99
Side gear thrust washer for 7.25″ Chrysler.
Product Features:
See More
Product Features:
- Side gear thrust washer kit
- Fits Chrysler 7.25″
Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)
from
$64.99
Differential side bearing screw adjuster for 9.25″ Chrysler.
Product Features:
See More
Product Features:
- Side adjuster for Chrysler 9.25″ rear
Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)
from
$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1330 u-joint size
- Includes two u-bolts and four nuts
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#89) Differential (Part No.13007)
from
$289.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’89’ case
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25" (Part No.41013)
from
$52.99
7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″, 8.25″, 8.75″, and 9.25″.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
- 7290 u-joint size
- Includes two straps and four bolts
Yukon Gear – Ring Gear Bolt For Chrysler 9.25" Rear (Part No.33033)
from
$9.99
Ring gear bolt for Chrysler 9.25″ rear, 7/16″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Chrysler 9.25″ rear
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
Yukon Gear – Flange Yoke For Chrysler 9.25" (Part No.41012)
from
$263.99
Yukon flange yoke for Chrysler 9.25″. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 29 spline
- Round companion flange
National – Bearings (Part No.HM803110)
from
$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.34022)
from
$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 with 35 spline axles
- 4.10 and down ratio only
- Forged case and 8620 internals for added strength
- Works with a variety of air delivery systems
- Assembled in the USA
Popular 1971 Plymouth Fury Drivetrains Categories
1971 Plymouth Fury Drivetrains
You count on your 1971 Plymouth Fury to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 468 Drivetrains ranging in price from $2.29 to $1,487.99, you’re sure to find everything you need for your 1971 Plymouth Fury.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, Driveworks, and National. 1971 Plymouth Fury Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 33,240 extensive product reviews on 1971 Plymouth Fury Drivetrains. Some of the top-rated Drivetrains products we carry are DIFFERENTIAL GASKET with 4.4 stars and Multi Purpose Seal with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1971 Plymouth Fury below to get started!
Top-Rated Drivetrains Brands For Your 1971 Plymouth Fury
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Plymouth Fury running right for years to come. In our inventory you’ll find brands like Valvoline, Driveworks, National, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1971 Plymouth Fury back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1971 Plymouth Fury Drivetrains
What are the most purchased Drivetrains for the 1971 Plymouth Fury?
Out of 468 Drivetrains for the 1971 Plymouth Fury, the most popular in our inventory are:
What are the top-rated 1971 Plymouth Fury Drivetrains?
Top-rated Drivetrains for your 1971 Plymouth Fury based on customer reviews/ratings are:
from
$6.79
(21)
DIFFERENTIAL GASKET
“I always use Fel-Pro gaskets they’re the best, but this gasket to replace the differential gasket on my son’s Jeep when I did a fluid change work and ”
from
$16.49
(19)
Axle Repair Bearing
“Up and running again with no more axle seal leaks in my Grand Marquis with 318k miles on it!”
