1971 Plymouth Barracuda Drivetrains
More 1971 Plymouth Barracuda Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1971 Plymouth Barracuda, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1971 Plymouth Barracuda Drivetrains
Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)
from
$14.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)
from
$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)
Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10047)
from
$139.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing with inner and outer seals (one side) for 8.75″ Chrysler. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ rear
- Includes axle bearing and inner and outer axle seals
- Services one side
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)
from
$14.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 315G, 317, 319 & 457
- Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)
from
$187.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21408)
from
$252.99
Yukon 1541H alloy cut to fit rear axle for Chrysler 8.75″ measuring 28″-32″ with 30 splines and 5×4.5 bolt pattern. for use with A, C & E-Body. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 30 spline
- Cut to length design fits 28″-32″ applcations
- 5 x 4.5″ bolt pattern
USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)
from
$209.99
USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Chrysler 8.25″ 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Bearings (Part No.LM102910)
from
$6.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)
from
$269.99
Dana 60 & Dana 61 TracLoc clutch set.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 60 Trac Loc positraction
Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10046)
from
$155.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle sealed ball bearing (one side) for 8.75″ Chrysler. Not recommended for truck or racing applications. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ rear
- Includes one sealed axle bearing
- Services one side
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
USA Standard Gear – 8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron (Part No.59001)
from
$469.99
Product Features:
See More
- Dropout housing
- Fits Chrylser 8.75″
- ’89’ case design
- Nodular iron for added strength
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
USA Standard Gear – Master Overhaul Kit Dana 60 Front (Part No.37020)
from
$336.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
Motive Gear – Ring Gear Bolt (Part No.1304)
Motive Gear – Differential Gear Install Kit (Part No.C8.25IK)
Yukon Gear – Differential Carrier (Part No.20040)
from
$386.99
Differential Carrier
Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)
USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)
from
$198.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 60, 35 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$56.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)
Yukon Gear – 8.75" Chrysler Inner Axle Seal, Use With Set7 (Part No.30198)
from
$8.99
8.75″ Chrysler inner axle seal, use w/set7.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear inner axle seal
- Fits Chrysler 8.75″ rear
- Tapered rolling bearing design only
Dorman – Differential Pinion Yoke Assembly (Part No.697-529)
from
$203.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Yukon Gear – Set Up Bearing (Part No.56039)
from
$263.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 60
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Popular 1971 Plymouth Barracuda Drivetrains Categories
1971 Plymouth Barracuda Drivetrains
You count on your 1971 Plymouth Barracuda to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 428 Drivetrains ranging in price from $2.49 to $1,487.99, you’re sure to find everything you need for your 1971 Plymouth Barracuda.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like National, DriveWorks, and Yukon Gear. 1971 Plymouth Barracuda Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,511 extensive product reviews on 1971 Plymouth Barracuda Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 3.9 stars and Universal Joint with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1971 Plymouth Barracuda below to get started!
Top-Rated Drivetrains Brands For Your 1971 Plymouth Barracuda
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Plymouth Barracuda running right for years to come. In our inventory you’ll find brands like National, DriveWorks, Yukon Gear, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Drive Shafts and Axles and Universal Joints. All are waiting to get your 1971 Plymouth Barracuda back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1971 Plymouth Barracuda, and some of our most reviewed National parts include:
FAQs for 1971 Plymouth Barracuda Drivetrains
What are the most purchased Drivetrains for the 1971 Plymouth Barracuda?
Out of 428 Drivetrains for the 1971 Plymouth Barracuda, the most popular in our inventory are:
What are the top-rated 1971 Plymouth Barracuda Drivetrains?
Top-rated Drivetrains for your 1971 Plymouth Barracuda based on customer reviews/ratings are:
from
$7.89
(7)
Universal Joint
“i never worked on front axle u-joints before. getting the old ones out was a real project,but installing these was a snap. they fit my 97 dodge ram pe”
from
$4.99
(5)
Universal Joint
“Ok, this joints are no doubt heavy duty, they fit like a glove and were easy to install. The needle caps stayed put during assembly unlike others that”
from
$8.99
(5)
Universal Joint
“real nice piece. made in the U.S. has fitting for periodic lubrication in the center and in one cap. can’t beat the price.”
