1971 Mercury Capri Differentials

Essential 1971 Mercury Capri Differentials

Yukon Gear – Master Overhaul Kit For Ford 8" Differential With HD Pinion Support (Part No.14049)

Master Overhaul Kit For Ford 8" Differential With HD Pinion Support

from

$297.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Ford 8″ with Daytona pinion support
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush, and gasket.
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)

Tapered Roller Bearing

from

$10.29
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Good Used Yoke For Ford 8" With A 1310 U/Joint Size (Part No.41047)

Good Used Yoke For Ford 8" With A 1310 U/Joint Size

from

$289.99
Good used Yukon yoke for Ford 8″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8″
  • 25 spline
  • 1310 u-joint size
  • Outside snap ring design
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • U-bolt style
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$12.79
Product Features:
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
  • Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
  • Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$41.99
Product Features:
  • Shim kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Trac-Loc For Ford 8" Wtih 28 Spline Axles – Street Design (Part No.26002)

Trac-Loc For Ford 8" Wtih 28 Spline Axles - Street Design

from

$889.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8″ with 28 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Street design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Trac Loc Spring For Ford 9" & 8"

from

$8.99
Product Features:
  • Trac Loc spring for Ford 8″ and 9″
See More

Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)

Pinion Support Bolt For 8" And 9" Ford

from

$6.99
Pinion support bolt for 8″ and 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 8″ and 9″
  • 3/8″ x 24 thread
  • 1.0″ long
See More

Pro-King – Differential Ring Gear Bolt (Part No.761A935)

Differential Ring Gear Bolt

from

$0.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Help – Pinion Crush Sleeves (Part No.81056)

Pinion Crush Sleeves

from

$5.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
  • Required replacement – when servicing the differential
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)

Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20

from

$16.99
Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.

Product Features:
  • Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
  • Fits standard open differentials only
  • 0.750″ diameter
See More

National – Multi Purpose Seal (Part No.7044NA)

Multi Purpose Seal

from

$15.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Standard Open Carrier Case, Ford 8.8", 31 Spline (Part No.20077)

Standard Open Carrier Case, Ford 8.8", 31 Spline

from

$269.99
8.8″ 31 spline standard Open case (7/8 X-PIN HOLE).

Product Features:
  • Standard open carrier case
  • Fits Ford 8.8″ with 31 spline axles
  • Does not include spider gears
  • 0.875″ cross pin shaft diameter
See More

Yukon Gear – Pinion Nut (Part No.33154)

Pinion Nut

from

$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:
  • Pinion nut for Ford 7.5″, 8″ and 9″
  • 3/4″ x 20 thread
  • 1 1/6″ socket
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Yukon Gear – Minor Install Kit For Ford 7.5" Differential (Part No.12033)

Minor Install Kit For Ford 7.5" Differential

from

$55.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Ford 7.5″
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Pro-King – Differential Cover Gasket (Part No.762B303)

Differential Cover Gasket

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – Lock Right Locker (Part No.1821-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Bearing Race Driver (Part No.56020)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits M802011 race
    • All steel construction
    See More

    USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)

    Standard Spider Gear Set For Ford 8.8", 31 Spline

    from

    $209.99
    Product Features:
    • Spider gear kit
    • Fits Ford 8.8″ 31 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – 8" Ford O-Ring (Part No.30027)

    8" Ford O-Ring

    from

    $9.99
    8″ Ford O-ring.

    Product Features:
    • Pinion support o-ring
    • Fits Ford 8″
    See More

    Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)

    Dropout Housing Stud For Ford 8" & 9"

    from

    $7.99
    Product Features:
    • Housing stud
    • Fits Ford 8″ and 9″
    See More

    National – Taper Bearing Cone (Part No.LM501349)

    Taper Bearing Cone

    from

    $17.99
    Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

    Product Features:
    • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
    • SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
    • OE-STYLE DESIGN — Engineered to meet OE specifications
    • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
    • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
    See More

    Yukon Gear – Trac Loc Friction Plate, 4 Tab (Part No.16177)

    Trac Loc Friction Plate, 4 Tab

    from

    $21.99
    Product Features:
    • Friction plate
    • Fits Ford 8″ and 9″ Trac Loc positraction
    See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    1971 Mercury Capri Differentials

    Maybe you’re in the middle of a full rebuild of that 1971 Mercury Capri. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 67 different Differentials in our inventory ranging from $3.99 to $931.99. That means you can find the exact parts or products you need to keep that 1971 Mercury Capri running smoothly.

    Differentials are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1971 Mercury Capri. Yukon Gear, Dorman, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1971 Mercury Capri, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

    So if you’re in the market for aftermarket Differentials to keep your 1971 Mercury Capri rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1971 Mercury Capri Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1971 Mercury Capri demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Capri the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular National Differentials

    We carry National parts in our stock across Front Differential Pinion Bearings categories, plus more. For a 1971 Mercury Capri, our most popular National Differentials include:
    Bearings
    from $25.49
    (1)
    Bearings
    Front Differential Pinion Bearings