1971 Land Rover Range Rover Cooling and Climate Controls
More 1971 Land Rover Range Rover Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1971 Land Rover Range Rover, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1971 Land Rover Range Rover Cooling and Climate Controls
Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1590)
from
$69.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.
Product Features:
See More
Product Features:
- 100% Factory tested for leakage and dimensional precision
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Assembled with new, high-quality unitized shaft seals to prevent premature leakage
- Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
Graf – Graf Water Pump (Part No.G3000188538GRA)
from
$144.74
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.
Product Features:
See More
Product Features:
- All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
- The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
- The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
- The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
- On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
- After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
Geba – Water Pump (Part No.G3000939228GEB)
from
$186.14
Water Pump
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4154)
from
$132.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1531)
from
$96.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.
Product Features:
See More
Product Features:
- 100% Factory tested for leakage and dimensional precision
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Assembled with new, high-quality unitized shaft seals to prevent premature leakage
- Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1200)
from
$125.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Motorad UltraStats – Thermostat: 180 Degrees (Part No.5200-180)
from
$14.29
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Carquest Premium – Standard Thermostat: 205 Degrees (Part No.13352)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13356)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
APA/URO Parts – Thermostat Assembly (Part No.G4002408485APA)
from
$70.52
Thermostat Assembly
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13358)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad UltraStats – Thermostat: 195 Degrees (Part No.5200-195)
from
$18.29
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Original Equipment – Thermostat (Part No.G4000311798OEA)
from
$62.61
The Original Equipment brand Thermostat is the same OEM quality and performance of the original equipment it replaces and is supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Original Equipment Supplier
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- OES design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Rein – Thermostat Insert (Part No.CTN0044)
from
$36.99
Rein Automotive OE quality thermostat inserts install, fit and perform the way the original manufacturer intended. This ensures a smooth and easy installation, just as one would expect to find with OE quality. These inserts are designed to meet or exceed the OE materials used. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat inserts aim to provide the profession repair technician and vehicle owner peace of mind and trust that is expected from an OE quality component.
Product Features:
See More
Product Features:
- Matches original equipment design specifications
- All gaskets or seals necessary for installation are supplied with thermostats
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Thermostat set to 88 degrees Celsius to maintain optimal running temperature
Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13359)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Standard Thermostat: With Thermostat Insert, With Seal, 190 Degrees (Part No.821-190)
from
$55.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Popular 1971 Land Rover Range Rover Cooling and Climate Controls Categories
1971 Land Rover Range Rover Cooling and Climate Controls
You count on your 1971 Land Rover Range Rover to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 7 Cooling and Climate Controls ranging in price from $9.99 to $132.99, you’re sure to find everything you need for your 1971 Land Rover Range Rover.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 2 different brands like Carquest Premium and Motorad UltraStats. 1971 Land Rover Range Rover Cooling and Climate Controls start as low as $9.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 171 extensive product reviews on 1971 Land Rover Range Rover Cooling and Climate Controls.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1971 Land Rover Range Rover below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1971 Land Rover Range Rover
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Land Rover Range Rover running right for years to come. In our inventory you’ll find brands like Carquest Premium Motorad UltraStats, and even more.
Popular Carquest Premium Cooling and Climate Controls
You’ll find popular Carquest Premium brand products across Engine Cooling Parts. All are waiting to get your 1971 Land Rover Range Rover back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1971 Land Rover Range Rover, and some of our most reviewed parts include:
FAQs for 1971 Land Rover Range Rover Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1971 Land Rover Range Rover?
Out of 7 Cooling and Climate Controls for the 1971 Land Rover Range Rover, the most popular in our inventory are:
