1971 Ford Thunderbird Performance Ignition Products
More 1971 Ford Thunderbird Performance Ignition Products
Find your specific 1971 Ford Thunderbird original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1971 Ford Thunderbird Performance Ignition Products
Accel – Contact And Condenser Kit (Part No.8203)
from
$81.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Coil Ignition Coil (Part No.140001)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$145.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)
from
$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
MSD Ignition – Coil; Blaster 2; with Ballast and Hardware (Part No.8203)
from
$82.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for stock points or electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Metal Canister Is Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
Hypertech – Power Cap & Rotor Kit for Ford V8 with HEI (Part No.4062)
from
$54.99
Hypertech’s Power Coil is capable of firing a street or slightly modified engine up to 7000 RPMs. Voltage gain over stock can exceed up to 57% more output depending on application. Stock coils usually average around 36,000 volts as compared to Hypertech’s coil kits that average between 45,000 and 55,000. Our coil kits include coil, brass terminals, cap, and rotor. Nylon rotor hold-down screws are included to prevent misfire, and our caps are made of high dielectric material to prevent carbon tracking. Each cap fits the distributor housing tightly to eliminate leakage. Power Coil/Caps/Rotors are NOT legal for sale/use in CA.
Product Features:
See More
Product Features:
- High Output Voltage
- More Spark Energy
- Up To 7000 RPMs
- No Drop Off In Power As RPMs Increase
- Wider Plug Gaps; Brass Terminals
- Constructed w/Burn Through Resistant Materials
- Excellent Dielectric Strength
- Resists Carbon Tracking
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Popular 1971 Ford Thunderbird Performance Ignition Products Categories
1971 Ford Thunderbird Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 1971 Ford Thunderbird. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 7 different Performance Ignition Products in our inventory ranging from $25.99 to $113.99. That means you can find the exact parts or products you need to keep that 1971 Ford Thunderbird running smoothly.
Performance Ignition Products are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1971 Ford Thunderbird. Accel, MSD Ignition, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 1971 Ford Thunderbird, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 76 reviews in this category, some of the top rated parts include Coil; Blaster 2; High Performance with 4.3 stars.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 1971 Ford Thunderbird rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 1971 Ford Thunderbird Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1971 Ford Thunderbird demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your Thunderbird the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular Mallory Performance Ignition Products
We carry Mallory parts in our stock across Performance Ignition Parts categories, plus more. For a 1971 Ford Thunderbird, our most popular Mallory Performance Ignition Products include:
Top 1971 Ford Thunderbird Performance Ignition Products from Accel
Accel products are another trusted brand when it comes to Performance Ignition Products for your 1971 Ford Thunderbird. Popular Accel parts include:
FAQs for 1971 Ford Thunderbird Performance Ignition Products
What are the most purchased Performance Ignition Products for the 1971 Ford Thunderbird?
Out of 7 Performance Ignition Products for the 1971 Ford Thunderbird, the most popular in our inventory are:
What are the top-rated 1971 Ford Thunderbird Performance Ignition Products?
Top-rated Performance Ignition Products for your 1971 Ford Thunderbird based on customer reviews/ratings are:
