1971 Ford Thunderbird Drivetrains
More 1971 Ford Thunderbird Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1971 Ford Thunderbird, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1971 Ford Thunderbird Drivetrains
Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)
from
$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.
Product Features:
See More
Product Features:
- Carrier race
- Fits Ford 9″
- Conversion race to install small bearing carrier into 3.250″ dropout
Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)
from
$22.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits large and small bearing applications
- 3/8″ bolt holes
- 3 9/16″ x 2″ bolt pattern
Yukon Gear – Pinion Depth Shims For Ford 9" With 7/16" Studs (Part No.55057)
from
$76.99
Product Features:
See More
- Pinion depth shim kit
- Fits Ford 9″ with 7/16″ pinion support bolts
Yukon Gear – Standard Open Spider Gear Kit For 9" Ford With 31 Spline Axles And 4-Pinion Design (Part No.16034)
from
$317.99
Yukon standard open spider gear kit for 9″ Ford with 31 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 9″ open differential with 31 spline axles
- Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)
from
$6.99
Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8.8″
- 0.750″ diameter cross pin shaft applications only
USA Standard Gear – Spartan Locker For Ford 8.8", 31 Spline, Includes Heavy-Duty Cross Pin Shaft (Part No.17005)
from
$649.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Ford 8.8″ with 31 spline axles and 7/8″ cross pin shaft
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Richmond Gear – Differential Cross Shaft (Part No.CSPF88L)
from
$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Neapco – Universal Joint (Part No.1-0025)
Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.8R)
from
$108.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG.&SEAL FORD 8.8
Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)
from
$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.
Product Features:
See More
Product Features:
- Axle stud for Ford 7.5″, 8.8″ and 9″
- 1/2″ x 20 thread
- 1 7/8″ long
- 29/64″ shoulder length
Motive Gear – Differential Gear Install Kit (Part No.F7.5IK)
USA Standard Gear – Master Overhaul Kit for the Ford 7.5 Differential (Part No.37027)
from
$199.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Pro-King – Differential Clutch Pack (Part No.762B119)
from
$133.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)
from
$41.99
Product Features:
See More
- Shim kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)
Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)
from
$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.
Product Features:
See More
Product Features:
- Adapter washer
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
National – Multi Purpose Seal (Part No.51098)
from
$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Tapered Roller Bearing (Part No.S-25520)
National – Bearings (Part No.31520)
from
$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Bearing Race Driver (Part No.56023)
from
$219.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M88010 race
- All steel construction
Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13045)
from
$284.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 9″ with Daytona pinion support
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – O-Ring For 9" Ford (Part No.30028)
from
$14.99
O-ring for 9″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion support o-ring
- Fits Ford 9″
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Nut 13/16 In.-20 Hex Size 1-1/8 In. (Part No.615-075.1)
from
$3.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1971 Ford Thunderbird Drivetrains Categories
1971 Ford Thunderbird Drivetrains
You count on your 1971 Ford Thunderbird to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 344 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1971 Ford Thunderbird.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, Driveworks, and National. 1971 Ford Thunderbird Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 568 extensive product reviews on 1971 Ford Thunderbird Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.0 stars and Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1971 Ford Thunderbird below to get started!
Top-Rated Drivetrains Brands For Your 1971 Ford Thunderbird
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Ford Thunderbird running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, National, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1971 Ford Thunderbird back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1971 Ford Thunderbird, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1971 Ford Thunderbird Drivetrains
What are the most purchased Drivetrains for the 1971 Ford Thunderbird?
Out of 344 Drivetrains for the 1971 Ford Thunderbird, the most popular in our inventory are:
What are the top-rated 1971 Ford Thunderbird Drivetrains?
Top-rated Drivetrains for your 1971 Ford Thunderbird based on customer reviews/ratings are:
from
$4.59
(10)
Universal Joint
“The part was a great mach. it fit real nice and I personally believe it may be better than the OE part because, It has the grease fitting which means ”
