1971 Ford E-300 Econoline Drivetrains

Essential 1971 Ford E-300 Econoline Drivetrains

Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)

Pinion Install Kit For Dana 60 Rear Differential

from

$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

National – Bearings (Part No.207-L)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With Fine Spline Axles And A 7290 U/Joint Size (Part No.41032)

Replacement Yoke For Dana 60 And 70 With Fine Spline Axles And A 7290 U/Joint Size

from

$205.99
Yukon replacement yoke for Dana 60 and 70 with fine spline axles and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 7290 u-joint size
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down (Part No.20043)

Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down

from

$509.99
Product Features:
  • Trac Loc positraction carrier case
  • Does not include spider gears
  • Fits Dana Spicer 60
  • 4.10 and down ratio only
  • ABS and non-ABS compatible
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)

Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS

from

$10.99
Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.

Product Features:
  • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
  • 1.830″ I.D.
  • 10 outer tabs
See More

Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)

Dana 60 & Dana 61 Tracloc Clutch Set

from

$269.99
Dana 60 & Dana 61 TracLoc clutch set.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Trac Loc positraction
See More

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

USA Standard Gear – Spartan Spring & Pin Kit, Fits Larger Designs (Part No.17010)

Spartan Spring & Pin Kit, Fits Larger Designs

from

$26.99
Spartan spring & pin kit, fits larger designs.

Product Features:
  • Fits Dana Spicer 60
  • Replacement alignment pin and spring kit
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)

Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles

from

$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

Differential Cover Gasket

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

USA Standard Gear – Master Overhaul Kit Dana 60 and 61 Rear Differential (Part No.37021)

Master Overhaul Kit Dana 60 and 61 Rear Differential

from

$253.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 60 rear
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

National – Multi Purpose Bearing (Part No.HB-88508)

Multi Purpose Bearing

from

$55.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

National – Bearings (Part No.HM88510)

Bearings

from

$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Oil Seal (Part No.S-9316)

Oil Seal

from

$3.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)

Replacement Spider Gear Set For Dana 60, 35 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60, 35 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

1330 Dual-Size Cap U/Joint

from

$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More

Driveworks – Oil Seal (Part No.S-3638)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.HM88542)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Drive Shaft Pinion Yoke

from

$117.99


Product Features:
  • PINION YOKE
  • CAST:1310
  • U-BOLT STYLE
See More

National – Taper Bearing Cone (Part No.LM501349)

Taper Bearing Cone

from

$17.99
Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
  • OE-STYLE DESIGN — Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)

Pump Up Kit, Zip Locker

from

$174.99
Pump up kit, Zip Locker.

Product Features:
  • Tire pump up kit
  • Includes hose, fittings, couplers and teflon tape
See More

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 60 (Part No.17019)

Spartan Locker Replacement Cross Pin For Dana 60

from

$52.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Dana Spicer 60
  • Works with Spartan Locker or standard open spider gears
See More

Popular 1971 Ford E-300 Econoline Drivetrains Categories

1971 Ford E-300 Econoline Drivetrains

You count on your 1971 Ford E-300 Econoline to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 225 Drivetrains ranging in price from $3.49 to $1,487.99, you’re sure to find everything you need for your 1971 Ford E-300 Econoline.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, Driveworks, and National. 1971 Ford E-300 Econoline Drivetrains start as low as $3.49!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,076 extensive product reviews on 1971 Ford E-300 Econoline Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.0 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1971 Ford E-300 Econoline below to get started!

Top-Rated Drivetrains Brands For Your 1971 Ford E-300 Econoline

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Ford E-300 Econoline running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, National, and even more.

Popular Dorman Drivetrains

You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1971 Ford E-300 Econoline back on the road. Some of the top-rated Dorman products in these categories are:
Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.
from $3.49
(3)
Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.
Spindle Lock Nuts

FAQs for 1971 Ford E-300 Econoline Drivetrains

What are the most purchased Drivetrains for the 1971 Ford E-300 Econoline?

Out of 225 Drivetrains for the 1971 Ford E-300 Econoline, the most popular in our inventory are:
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints
Universal Joint
from $15.99
(28)
Universal Joint
U-Joints

What are the top-rated 1971 Ford E-300 Econoline Drivetrains?

Top-rated Drivetrains for your 1971 Ford E-300 Econoline based on customer reviews/ratings are:
Greaseable Premium Universal Joint
from $19.99
(31)
Greaseable Premium Universal Joint
“Greaseable with life time warranty”
Non-Greaseable Super Strength Universal Joint
from $32.99
(28)
Non-Greaseable Super Strength Universal Joint
“installed as needed”
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
“Fit just like the old one.”