1971 Dodge B300 Van Suspension Parts

Essential 1971 Dodge B300 Van Suspension Parts

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

MOOG – Coil Spring Set (Part No.7170)

Coil Spring Set

from

$173.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG5418)

High Pressure Monotube Gas Shock

from

$90.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Dodge Vans
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Bilstein – B6 Performance – Shock Absorber (Part No.L4000396523BIL)

B6 Performance - Shock Absorber

from

$201.09
Bilstein B6 Performance gas pressure shock absorbers and struts are the ideal choice for most vehicles, including full-size sedans, SUVs and trucks. These shock absorbers and struts provide improved handling and stability, without sacrificing ride comfort. Bilstein B6 Performance shock absorbers offer superior damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride.

Product Features:
  • Monotube gas pressure construction
  • Improved safety and sportiness
  • Added traction and enhanced stability
  • Increased durability and performance while maintaining ride comfort
  • Road-tested and fine-tuned by BILSTEIN for each vehicle specific application The performance of the Bilstein shocks does not decline from age, use or heat, requiring no compensating manual adjustments as with conventional multi-tube shocks.
See More

Rancho – RS9000XL Shock Absorber (Part No.RS999113)

RS9000XL Shock Absorber

from

$153.99
Get premium control and performance with Rancho RS9000®XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on- and off-road use, towing and more.

Product Features:
  • NINE LEVELS OF PERFORMANCE — Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
  • DESIGNED FOR HARDWORKING VEHICLES — Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
  • INDUSTRY FIRST — Recognized as the first nine-position manually adjustable shock series in the off-road market
  • REDUCES FADE — Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
  • STRONG AND DURABLE — Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
  • HANDLES EXTREME TEMPERATURE CHANGES — Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures long life
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Controls Two Air Springs Individually, Switch Operated

from

$1217.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
See More

Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)

Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose

from

$823.99
Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:
  • The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
  • The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
  • Easy Installation
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, With Compressor/Gauge, Switch Operated (Part No.2178)

Controls Two Air Springs Individually, With Compressor/Gauge, Switch Operated

from

$776.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Designed To Provide Inflation Control Of Your Air Helper Springs
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Rare Parts – Control Arm Bushing (Part No.RP15212)

Control Arm Bushing

from

$52.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Rare Parts – Control Arm Bush (Part No.RP22017)

Control Arm Bush

from

$15.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

MOOG – Control Arm Offset Bushing Kit (Part No.K7104)

Control Arm Offset Bushing Kit

from

$73.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Eccentric bushing kit provides additional camber adjustment
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Elastomer compounds do not utilize any reground rubber fillers
  • High level bonding adhesive is used for durability
  • Bushings assembled with proper precompression for ultimate in performance and feel
See More

MOOG – Leaf Spring Bumper (Part No.K7293)

Leaf Spring Bumper

from

$7.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Rare Parts – Spring Bushing (Part No.RP35472)

Spring Bushing

from

$22.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

MOOG – Leaf Spring Bushing (Part No.K7308)

Leaf Spring Bushing

from

$21.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Spring Bushing (Part No.RP35376)

Spring Bushing

from

$22.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

Rare Parts – Spring Bushing (Part No.RP35499)

Spring Bushing

from

$4.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

Dorman – Help – Upper Control Arm Bumper (Part No.31053)

Upper Control Arm Bumper

from

$10.99
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Monroe – Gas-Magnum Shock Absorber (Part No.34831)

Gas-Magnum Shock Absorber

from

$65.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Reflex Light Truck Shock Absorber (Part No.911096)

Reflex Light Truck Shock Absorber

from

$64.99
Ideal for vehicles with a higher center of gravity, Monroe® Reflex® light truck shock absorbers feature ASD valving technology that automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive.

Product Features:
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
  • 2-1/4 inch or 2 inch Diameter Reserve Tube: Allows more fluid carrying capacity for a cooler running unit.
  • 1-3/8 inch Bore: Lower operating pressure than standard 1 inch bore units
  • 5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Magnum RV Shock Absorber (Part No.555037)

Magnum RV Shock Absorber

from

$106.99
The Monroe® Magnum RV shock absorber utilizes advanced technology, combining a gas charge and full displaced valving for superior RV performance.

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-3/8-inch (60.3 mm) reserve tube The 2″ (555xx Series) or 2-3/8′ (557xx Series) reserve tube holds more fluid or more consistent performance – when required
  • 1-3/8-inch (35 mm) or 1-3/4-inch (44.6 mm) bore The 1-3/8′ (555xx Series) or 1-3/4″ (557xx Series) bore is larger than most shocks to provide more efficient and consistent control – when required
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • All weather fluid Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
See More

Monroe – Gas-Magnum Shock Absorber (Part No.34910)

Gas-Magnum Shock Absorber

from

$65.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Matic LT Shock Absorber (Part No.59547)

Gas-Matic LT Shock Absorber

from

$37.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Gas-Matic LT Shock Absorber (Part No.59552)

Gas-Matic LT Shock Absorber

from

$30.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Rancho – RS5000 Shock Absorber (Part No.RS5113)

RS5000 Shock Absorber

from

$66.99
The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:
  • Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
  • 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
  • 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
  • Protective boot included – Protects the shock rod and oil seal
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG5403)

High Pressure Monotube Gas Shock

from

$92.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Dodge Trucks
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Rancho – RS5000X Shock Absorber (Part No.RS55113)

RS5000X Shock Absorber

from

$85.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
  • MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
  • STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
  • HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
  • MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
  • Rebound Bumper
See More

1971 Dodge B300 Van Suspension Parts

You count on your 1971 Dodge B300 Van to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 48 Suspension Parts ranging in price from $4.99 to $1,217.99, you’re sure to find everything you need for your 1971 Dodge B300 Van.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 9 different brands like Monroe, Rancho, and Moog. 1971 Dodge B300 Van Suspension Parts start as low as $4.99!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,428 extensive product reviews on 1971 Dodge B300 Van Suspension Parts. Some of the top-rated Suspension Parts products we carry are OESpectrum Light Truck Shock Absorber with 4.5 stars and Magnum RV Shock Absorber with 5.0 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1971 Dodge B300 Van below to get started!

Top-Rated Suspension Parts Brands For Your 1971 Dodge B300 Van

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Dodge B300 Van running right for years to come. In our inventory you’ll find brands like Monroe, Rancho, Moog, and even more.

Popular Rancho Suspension Parts

You’ll find popular Rancho brand products across Shocks and Struts. All are waiting to get your 1971 Dodge B300 Van back on the road. Some of the top-rated Rancho products in these categories are:
RS5000X Shock Absorber
from $85.99
(3)
RS5000X Shock Absorber
Front Shock and Struts
RS5000 Shock Absorber
from $66.99
(10)
RS5000 Shock Absorber
Front Shock and Struts

FAQs for 1971 Dodge B300 Van Suspension Parts

What are the most purchased Suspension Parts for the 1971 Dodge B300 Van?

Out of 48 Suspension Parts for the 1971 Dodge B300 Van, the most popular in our inventory are:
Gas-Matic LT Shock Absorber
from $37.99
(6)
Gas-Matic LT Shock Absorber
Front Shock and Struts
Gas-Matic Truck Shock Absorber
from $42.49
(3)
Gas-Matic Truck Shock Absorber
Rear Shock and Struts
Gas-Magnum Shock Absorber
from $65.99
(2)
Gas-Magnum Shock Absorber
Front Shock and Struts

What are the top-rated 1971 Dodge B300 Van Suspension Parts?

Top-rated Suspension Parts for your 1971 Dodge B300 Van based on customer reviews/ratings are:
OESpectrum Light Truck Shock Absorber
from $60.99
(2)
OESpectrum Light Truck Shock Absorber
“Was easy to install and works great on my Chevy Van. I love the stability and handling that they gave the van. WOW what a difference.”
Magnum RV Shock Absorber
from $106.99
(1)
Magnum RV Shock Absorber
“I installed these on a 2001 Dodge Ram Van 3500 converted into a RoadTrek Class B Motorhome. These vans are prone to the terrible sway and almost uncr”
Reflex Light Truck Shock Absorber
from $53.99
(1)
Reflex Light Truck Shock Absorber
“Excellent ride… I am beyond amazed. I have 88,000 miles on my van, so I replaced the stock shocks with these. Wow!! Rides amazing.”