1971 Chevrolet Impala Performance Exhaust Products
More 1971 Chevrolet Impala Performance Exhaust Products
Find your specific 1971 Chevrolet Impala original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1971 Chevrolet Impala Performance Exhaust Products
Hooker Headers – Competition Header (Part No.2466HKR)
from
$269.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Super Comp. Header (Part No.2103HKR)
from
$870.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Street Force; Emissions Compatible Header (Part No.2063-1HKR)
from
$1210.00
Hooker Street Force Headers are designed to be a high performance alternative to the stock O.E. manifolds. These headers are built to accommodate all emission control devices. Please check your application in this section for more information regarding emissions legality.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Super Comp. Header (Part No.2116HKR)
from
$807.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – LS1 Swap Headers for 66-72 Chevelle, El Camino, Monte Carlo & Sprint (Part No.2455-1HKR)
from
$552.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Competition Header (Part No.2457-1HKR)
from
$668.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Super Comp. Header (Part No.2171-1HKR)
from
$1500.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Mr. Gasket – Header Bolt Set (Part No.2211G)
from
$50.39
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 16 per Package
- Resist corrosion and provides a clean professional appearance
Mr. Gasket – Alternator Bracket (Part No.5170)
from
$38.49
Original equipment style bracket in high quality chrome for years of service. Includes hardware.
Product Features:
See More
Product Features:
- Chrome Plated Heavy Gauge Steel
- Can Be Used For Other Applications
- Looks Better Than Painted
- Hardware included
Spectre – SBC Alt Bracket W/ Bolts (Part No.42283)
from
$15.99
This Spectre Alternator Bracket is a mount designed to fit 1969-1975 Chevrolet 265-400 Small Block engines with a short water pump with headers. Featuring a triple chrome-plated finish and high quality steel construction, this part is a replacement that mounts on the driver’s side. Intended to be used in conjunction with part number 42273 to mount the alternator, this bracket features a custom design for show quality appearances.
Product Features:
See More
Product Features:
- Fits Small Block Chevy 265-400 engines from 1969 to 1975 with headers and a short water pump
- Manufactured from high quality steel
- Designed for driver side mounting
- Features a triple chrome-plated finish
- Intended for use with part number 42273
Spectre – Alternator Bracket (Part No.4719)
from
$30.99
This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.
Product Features:
See More
Product Features:
- Fits Big Block Chevy engines with a long water pump from 1969 and later
- Manufactured from high quality steel
- Upper bracket for passenger side mounting
- Features a triple chrome-plated finish
- Stock replacement part
Mr. Gasket – Alternator Bracket (Part No.4954)
from
$19.29
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated. Similar in design to OEM units, these brackets can be adapted to other engines.
Product Features:
See More
Product Features:
- Chrome plated
- Similar to OEM design
- May be adaptable to other applications
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Dynomax – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.24235)
from
$99.99
DynoMax Race Bullet mufflers feature 100-percent welded construction for lifelong durability. The ‘Pure Unadulterated POWER’ and lightweight, compact design make it the ultimate race muffler. The unrestricted, straight-through design is dyno tested and t
Product Features:
See More
Product Features:
- Designed for vehicles with limited space
- Light weight compact design
- 100% welded design for maximum durability
- CRF Technology which helps provide up to a 4 dbA sound reduction, on most race applications, while maintaining a deep race tone
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942443)
from
$143.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)
from
$139.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5910)
from
$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)
from
$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Resists Deteriorating
- Provides Excellent Torque Retention
Mr. Gasket – Mls Exhaust Gasket (Part No.4805G)
from
$49.49
Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Product Features:
See More
Product Features:
- Multi Layer Stainless Steel 3-Layers
- Round Port 1.75″ Diameter
- Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
- Thickness .072″
- Fits GM LS Series Engines 1997-’15
Flowtech – Real-Seal; Header Gasket (Part No.99153FLT)
from
$85.39Product Features:
- Water/Weather Resistant
- Re-Useable
- Will Not Burn Or Blow Out
- Suitable For Port-Matching
- Made In USA
Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7157)
from
$60.29
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.
Product Features:
See More
Product Features:
- Will Not Shrink/Deteriorate
- Creates A Tight Leak Proof Seal
- Helps Lower Under hood Temps
- Seals Irregular Surfaces
- Seals Slightly Damaged Surface
- Ideal For Tow Vehicles
- Ideal For Motor Homes
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)
from
$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7154)
from
$59.19
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.
Product Features:
See More
Product Features:
- Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
- Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
- .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
- Provides excellent sealing and durability
- Conforms to and seals minor surface irregularities
- For high performance street, drag race, oval track and turbocharged (extreme heat) applications
- Ideal For Tow Vehicles
- Ideal For Motorhomes
Popular 1971 Chevrolet Impala Performance Exhaust Products Categories
1971 Chevrolet Impala Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1971 Chevrolet Impala. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 36 different Performance Exhaust Products in our inventory ranging from $19.29 to $619.99. That means you can find the exact parts or products you need to keep that 1971 Chevrolet Impala running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1971 Chevrolet Impala. Mr. Gasket, FEL-PRO Performance, and Hooker Headers are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1971 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 104 reviews in this category, some of the top rated parts include Competition Header with 5.0 stars and 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound with 3.0 stars.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1971 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1971 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1971 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular Flowtech Performance Exhaust Products
We carry Flowtech parts in our stock across Performance Exhaust Headers and Performance Exhaust Manifold Gaskets categories, plus more. For a 1971 Chevrolet Impala, our most popular Flowtech Performance Exhaust Products include:
Top 1971 Chevrolet Impala Performance Exhaust Products from Mr. Gasket
Mr. Gasket products are another trusted brand when it comes to Performance Exhaust Products for your 1971 Chevrolet Impala. Popular Mr. Gasket parts include:
from
$20.99
(14)
Performance Exhaust Gasket Set for Enhanced Sealing and Durability
Performance Exhaust Manifold Gaskets
FAQs for 1971 Chevrolet Impala Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1971 Chevrolet Impala?
Out of 36 Performance Exhaust Products for the 1971 Chevrolet Impala, the most popular in our inventory are:
from
$60.29
This product is not rated
Copper Seal; Exhaust Gasket Set
Performance Exhaust Manifold Gaskets
What are the top-rated 1971 Chevrolet Impala Performance Exhaust Products?
Top-rated Performance Exhaust Products for your 1971 Chevrolet Impala based on customer reviews/ratings are:
from
$269.99
(1)
Competition Header
“This is excellent product, come with connectors also. A piece of cake to install, free space for install and remove starter”
from
$139.99
(1)
50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound
“Love the sound,but a baffle came loose inside one of the mufflers after only a couple of years. Now it rattles. Go stainless steel.”
from
$619.99
(1)
Competition Header
“I loved the materials used and and the product. Advanced AP has gone way beyond everyone else for their customer service. Now for the issues with the ”
