1971 Chevrolet Chevelle Fuel and Emissions Systems
More 1971 Chevrolet Chevelle Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1971 Chevrolet Chevelle, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1971 Chevrolet Chevelle Fuel and Emissions Systems
KAI – Fuel Tank Strap (Part No.GMK4080749641S)
from
$36.99
New Goodmark 18 Piece Fuel Tank Strap Hardware Kit, Consists Of Bolts And Nuts
Product Features:
See More
Product Features:
- Consists Of Bolts And Nuts
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Delphi – Fuel Tank Lock Ring (Part No.FA10009)
from
$28.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi lock rings are designed to meet or exceed the performance of the original unit
- Made out of steel to endure harsh conditions
- Each lock ring is application specific to ensure the fuel system is locked in and seals properly
- Always consider replacing the lock ring as a part of fuel pump service
Dorman – Help – Fuel Pump Push Rod (Part No.03875)
from
$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.
Product Features:
See More
Product Features:
- Durable steel construction
- Direct replacement for a proper fit
- No special tools required
- Easy to install
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
KAI – Fuel Tank (Part No.FTK010225)
from
$187.99
New Platinum Pro Fuel Tank 17 Gallon
Product Features:
See More
Product Features:
- 17 Gallon, With Neck, Includes Lock Ring Kit
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fuel Tank (Part No.TNKGM37B)
from
$339.99
New Standard Replacement Fuel Tank, 64-67 Chevelle 20 Gallon, With Filler Neck
Product Features:
See More
Product Features:
- 64-67 Chevelle, 20 Gallon, With Filler Neck
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM37BFI)
from
$809.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium classic injection fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Application specific design ensure a perfect fit guarantee
- OEM, fit, form and function paired with todays fuel injection technology
- Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
- Proudly manufactured in Canada under stringent quality systems (ISO 9002)
- Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks
Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM34UFI)
from
$809.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium classic injection fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Application specific design ensure a perfect fit guarantee
- OEM, fit, form and function paired with todays fuel injection technology
- Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
- Proudly manufactured in Canada under stringent quality systems (ISO 9002)
- Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Electric Fuel Pump (Part No.E84070N)
from
$78.99
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends
- High-performance pump section assembly provides superior performance
- Leading-edge inlet design to increase performance and efficiency, leading to longer life
- High grade outer shell for life-long corrosion resistance
- Optimized, precision-wound armature assembly for increased performance
Delphi – Electric Fuel Pump: With Bracket, Clamps, Nuts/Bolts, Pall Nuts, Spacers, Wire Harness w/Connector (Part No.FE0539)
from
$86.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Dorman – Fuel Sending Unit Without Pump (Part No.692-233)
from
$61.99
This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
- Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Fuel Sending Unit (Part No.TNKFG107B)
from
$164.99
New Standard Replacement Fuel Sending Unit, 73-77 GM, With Air Conditioning With 3 Outlets
Product Features:
See More
Product Features:
- 73-77 GM, With A/C, With 3 Outlets
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$20.99
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)
from
$16.99
Mr. Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.
Product Features:
See More
Product Features:
- Precision Cut To Cover Pump
- Gasket Included
Carquest Premium – Fuel Cap: 10632, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10632)
from
$10.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)
from
$11.99
None
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Manufactured from durable, long-life materials
- Independently tested for emission control
- Passes all state and federal emissions tests
- Reduces air pollution with proper sealing and venting
Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)
from
$16.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
- “Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.
Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)
from
$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 1971 Chevrolet Chevelle Fuel and Emissions Systems Categories
1971 Chevrolet Chevelle Fuel and Emissions Systems
You count on your 1971 Chevrolet Chevelle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 47 Fuel and Emissions Systems ranging in price from $2.99 to $809.99, you’re sure to find everything you need for your 1971 Chevrolet Chevelle.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 13 different brands like Felpro, Carquest Premium, and Delphi. 1971 Chevrolet Chevelle Fuel and Emissions Systems start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 4,819 extensive product reviews on 1971 Chevrolet Chevelle Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack with 4.5 stars and Fuel Cap with 5.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1971 Chevrolet Chevelle below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1971 Chevrolet Chevelle
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Chevrolet Chevelle running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Delphi, and even more.
Popular Dorman – Help Fuel and Emissions Systems
You’ll find popular Dorman – Help brand products across Fuel Pumps. All are waiting to get your 1971 Chevrolet Chevelle back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1971 Chevrolet Chevelle, and some of our most reviewed parts include:
FAQs for 1971 Chevrolet Chevelle Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1971 Chevrolet Chevelle?
Out of 47 Fuel and Emissions Systems for the 1971 Chevrolet Chevelle, the most popular in our inventory are:
What are the top-rated 1971 Chevrolet Chevelle Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1971 Chevrolet Chevelle based on customer reviews/ratings are:
from
$22.99
(4)
Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack
“Exact fit replacement, no problems what so ever.”
from
$8.79
(2)
Fuel Cap
“Product worked perfectly however the first two boxes had the incorrect cap in it. It should have a sticker on it that states non-vented cap.”
from
$218.99
(1)
Fuel Tank
“Nice quality tank that when purchased with a coupon code is cheaper then any other online store. This is a vented tank, that info is not in the descr”
