1971 Chevrolet Camaro Exhaust Manifold and Headers
More 1971 Chevrolet Camaro Exhaust Manifold and Headers
Find your specific 1971 Chevrolet Camaro original or aftermarket Exhaust Manifold and Headers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1971 Chevrolet Camaro Exhaust Manifold and Headers
Hooker Headers – Super Comp. Header (Part No.2401HKR)
from
$1198.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Patriot Exhaust – H8012 1 3/4" Clippster Header Chevrolet Camaro Big Block Chevrolet 67-81 Raw (Part No.H8012)
from
$351.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear
Product Features:
See More
Product Features:
- Patriot Exhaust H8012 1 3/4″ Clippster Header Chevrolet Camaro Big Block Chevrolet 67-81 Raw
- Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
Hooker Headers – ExhstHdr (Part No.2105-3HKR)
from
$998.99
ExhstHdr
JBA Performance – 6813SJS 1 7/8" Header Long Tube Stainless Steel 2010-14 Camaro SS Silver Ceramic (Part No.6813SJS)
from
$942.99
JBA long tube headers are the number one choice for maximum performance gains and high RPMefficiency. These long tube designs are dyno and race proven to deliver the greatest possible increase inhorsepower and torque throughout the RPM range. All JBA lo
Product Features:
See More
Product Features:
- JBA Performance Exhaust 6813SJS 1 7/8″ Header Long Tube Stainless Steel 2010-14 Camaro SS Silver Ceramic
- 3/8″ thick CNC laser-cut flanges
Hooker Headers – Super Comp. Header (Part No.2285HKR)
from
$815.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-276)
from
$144.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Patriot Exhaust – H8068 1 5/8" Clippster Header Chevrolet Camaro Small Block Chevrolet 82-92 Raw (Part No.H8068)
from
$406.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear
Product Features:
See More
Product Features:
- Patriot Exhaust H8068 1 5/8″ Clippster Header Chevrolet Camaro Small Block Chevrolet 82-92 Raw
- Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
Flowtech – Standard Header (Part No.11114FLT)
from
$237.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-550)
from
$119.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Hooker Headers – Super Comp. Header (Part No.2117HKR)
from
$695.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Patriot Exhaust – H8026-2" Header Chevrolet Chevelle Big Block Chevrolet 68-74 Coated (Part No.H8026-1)
from
$671.99
Don’t give up looking for headers for your vehicle. Patriot offers headersfor many applications at prices you can afford. Built with surfacemachined thick steel flanges for a great seal andmandrel bent mild steel tubing. Patriot headers areavailable r
Product Features:
See More
Product Features:
- Patriot Exhaust H8026-2″ Header Chevrolet Chevelle Big Block Chevrolet 68-74 Coated
- Patriot offers headers for many applications at prices you can afford.
Hooker Headers – Super Comp. Header (Part No.2239-1HKR)
from
$1195.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – ExhstHdr (Part No.2109-1HKR)
from
$966.99
ExhstHdr
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-543)
from
$301.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$25.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1201)
from
$18.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 0.75″ Overall Length
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$44.99
Made from durable 304 stainless steel, this compact bolt head and flange is ideal for use where space is minimal, typical on header flanges. It resists rust and corrosion, provides a clean professional appearance.
Product Features:
See More
Product Features:
- Bright ball burnish finish
- These bolts are made from 304 stainless
- Compact hex head is ideal where space is limited
- 12 per set
Walker – Exhaust 35574 Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- Constructed from durable and robust material for long life
- Universal fit for installation flexibility
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker® accessories help to ensure effective exhaust repairs
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
Dorman – Help – Exhaust Manifold Hardware Kit – 3/8-16 In. (Part No.03401)
from
$11.49
Our Exhaust Stud and Nut provides you with the proper stud and nut for repairing or installing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- Also available in the Exhaust Manifold Hardware Kit
- New hardware helps fix exhaust leaks
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$24.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
Mr. Gasket – ExhstHdrBolt (Part No.2230G)
from
$46.99
ExhstHdrBolt
Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 2-13/16 In. (Part No.03134)
from
$9.99
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- New hardware helps fix exhaust leaks
- Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
- Also available separately (where applicable)
- Hardened steel construction for long-lasting durability
Dorman – Exhaust Manifold Hardware Kit (Part No.675-226)
from
$22.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – For Use With Chevy Ls V8 Engine, M8 Thread Size, Hex Head, Black Oxide, Set Of 12 (Part No.134-1102)
from
$41.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 3/8” Wide Header Flange
- 1.181? Underhead Length
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$44.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Popular 1971 Chevrolet Camaro Exhaust Manifold and Headers Categories
1971 Chevrolet Camaro Exhaust Manifold and Headers
Maybe you’re in the middle of a full rebuild of that 1971 Chevrolet Camaro. Maybe you just need a couple of Exhaust Manifold and Headers. Either way, Advance Auto Parts has 37 different Exhaust Manifold and Headers in our inventory ranging from $18.99 to $1,229.99. That means you can find the exact parts or products you need to keep that 1971 Chevrolet Camaro running smoothly.
Exhaust Manifold and Headers are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1971 Chevrolet Camaro. Mr. Gasket, ARP Auto Racing, and Hooker Headers are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Manifold and Headers for your 1971 Chevrolet Camaro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 36 reviews in this category, some of the top rated parts include Super Comp. Header with 4.0 stars.
So if you’re in the market for aftermarket Exhaust Manifold and Headers to keep your 1971 Chevrolet Camaro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Manifold and Headers Brands To Make Your 1971 Chevrolet Camaro Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1971 Chevrolet Camaro demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Manifold and Headers make up Advance Auto Parts’ inventory, and all are ready to help make your Camaro the best it can be. Be sure to browse some of our top Exhaust Manifold and Headers brands and parts.
Popular Patriot Exhaust Exhaust Manifold and Headers
We carry Patriot Exhaust parts in our stock across Exhaust Manifold and Headers categories, plus more. For a 1971 Chevrolet Camaro, our most popular Patriot Exhaust Exhaust Manifold and Headers include:
from
$392.99
(2)
H8026 2" Header Chevrolet Chevelle Big Block Chevrolet 68-74 Raw
Exhaust Manifold and Headers
Top 1971 Chevrolet Camaro Exhaust Manifold and Headers from Flowtech
Flowtech products are another trusted brand when it comes to Exhaust Manifold and Headers for your 1971 Chevrolet Camaro. Popular Flowtech parts include:
FAQs for 1971 Chevrolet Camaro Exhaust Manifold and Headers
What are the most purchased Exhaust Manifold and Headers for the 1971 Chevrolet Camaro?
Out of 37 Exhaust Manifold and Headers for the 1971 Chevrolet Camaro, the most popular in our inventory are:
from
$44.49
This product is not rated
For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12
Exhaust Manifold and Header Hardware
What are the top-rated 1971 Chevrolet Camaro Exhaust Manifold and Headers?
Top-rated Exhaust Manifold and Headers for your 1971 Chevrolet Camaro based on customer reviews/ratings are:
from
$695.99
(1)
Super Comp. Header
“The wrong gaskets were shipped with the headers.
The gaskets shipped were for a smaller tube header. Fortunately I wasn’t going to use the supplied”
