1971 Chevrolet C10 Pickup Ignition and Tune-Up Products
More 1971 Chevrolet C10 Pickup Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1971 Chevrolet C10 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1971 Chevrolet C10 Pickup Ignition and Tune-Up Products
Carquest Premium – Distributor Primary Lead Wire (Part No.DLA1138)
from
$9.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Condenser (Part No.GAA1039)
from
$15.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – Ignition Capacitor (Part No.D204)
from
$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest – Ignition Switch (Part No.CS84)
from
$24.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
NGK – NGK Wire Set (Part No.51428)
from
$39.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Ignition Switch Connector (Part No.PTA1273)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest – Distributor Rotor (Part No.D152)
from
$8.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.
Product Features:
See More
Product Features:
- High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
- The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
KAI – Ignition Switch Plate (Part No.GMK4143523691)
from
$5.99
New Goodmark Ignition Plate Inacc-Off-On-Startin
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ACDelco – Ignition Distributor Cap (Part No.D308R)
from
$24.29
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)
from
$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)
from
$290.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Replacement crank trigger wheel for small block Chevy
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered
- Powerful magnets are embedded in a billet aluminum trigger wheel
ACDelco – Copper Core Spark Plug: Original Equipment Replacement (Part No.R45TS)
from
$4.99
ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
Product Features:
See More
Product Features:
- GM regularly updates production and service part designs to integrate new materials and technologies
- High-Quality Copper Core: Designed with high-quality copper cores for reliable and efficient performance.
- Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced durability and performance.
- Outstanding Suppression Characteristics: Delivers reliable performance with excellent suppression characteristics.
- Versatile Applications: Providing high-quality replacement options for various vehicles.
Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)
from
$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed to meet or exceed OE specifications in form, fit and function
PerTronix – High-Performance Electronic Ignition for Delco 8-Cylinder Engines (Part No.1181)
from
$117.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign
Product Features:
See More
Product Features:
- PerTronix 1181 Ignitor Delco 8 cyl
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
Accel – 8.8Mm 300+Race Wire Uni Fit (Part No.7030)
from
$149.99
These ACCEL 300+ wire sets are custom tailored for race engines and their builders. The oversize 8.8mm wire is rated for 600 degrees F and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing.
Product Features:
See More
Product Features:
- 150 ohms per foot
- 8.8mm oversize silicone jacket
- Stainless-Steel Spark Plug Terminals
- Suppression of EMI/RFI
- 600-Degree Double Silicone Construction
- Spiral-Wound Copper/Nickel Alloy
DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8045)
from
$42.49
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)
from
$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.
Product Features:
See More
Product Features:
- PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
- These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)
from
$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.
Product Features:
See More
Product Features:
- PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
- These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)
from
$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Increased outer hardened layer thickness (RC 55-60)
- Micro Polished Surface For Smooth Contact
- Proprietary formulated ductile iron.
- Melonite QPQ coated reduces friction and initial wear
- Interstitial carbide improves wear resistance/running properties
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)
from
$35.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
MSD Ignition – Wire Set; Super Conductor; Chevy 366-454 with HEI Cap (Part No.35379)
from
$109.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Accel – 8Mm Super Stock Graphite Uni (Part No.4041)
from
$63.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)
from
$469.99
The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
Carquest Premium – Distributor T1612: 100% New, With Cap and Rotor (Part No.T1612)
from
$73.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
Accel – Dist:Chev V8 Hei Vac 265-454 (Part No.59130)
from
$115.99
ACCEL Performance Distributors are the perfect choice for your daily driver or street machine, We know the importance of a good quality distributor that doesn’t break the bank. These distributors feature a cast aluminum housing with a sintered bronze bushings for long life. An OEM style module is included along with a high-quality gear and cap with brass terminals for many miles of trouble-free service. ACCEL Performance Distributors are built to deliver performance at a value-based price.
Product Features:
See More
Product Features:
- Direct Plug In Factory Replacement Plug And Play
- All New Cast Aluminum Housings for durability
- OEM Style Ignition Modules for Trouble-Free Service
- High-Quality Distributor Gears
- Long Sintered Bushings for Long Life
- Distributor Cap w/Brass Terminals
- Includes Performance Coil
- Fit non computerized vehicles
Popular 1971 Chevrolet C10 Pickup Ignition and Tune-Up Products Categories
1971 Chevrolet C10 Pickup Ignition and Tune-Up Products
You count on your 1971 Chevrolet C10 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 180 Ignition and Tune-Up Products ranging in price from $1.49 to $593.99, you’re sure to find everything you need for your 1971 Chevrolet C10 Pickup.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 17 different brands like ACDelco, Autolite, and Motorcraft. 1971 Chevrolet C10 Pickup Ignition and Tune-Up Products start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 9,124 extensive product reviews on 1971 Chevrolet C10 Pickup Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.1 stars and OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, UR4 with 4.8 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1971 Chevrolet C10 Pickup below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1971 Chevrolet C10 Pickup
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1971 Chevrolet C10 Pickup running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, Motorcraft, and even more.
Popular Champion Ignition and Tune-Up Products
You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1971 Chevrolet C10 Pickup back on the road. Some of the top-rated Champion products in these categories are:
Top-Rated ACDelco Ignition and Tune-Up Products
If ACDelco are what you’re looking for, our inventory holds plenty. We stock ACDelco brand Ignition and Tune-Up Products for your 1971 Chevrolet C10 Pickup, and some of our most reviewed ACDelco parts include:
from
$4.99
(32)
Conventional Nickel Tip Copper Core Spark Plug: Enhances Heat Transfer & Durability
Spark Plugs
FAQs for 1971 Chevrolet C10 Pickup Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1971 Chevrolet C10 Pickup?
Out of 180 Ignition and Tune-Up Products for the 1971 Chevrolet C10 Pickup, the most popular in our inventory are:
from
$3.49
(50)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
Spark Plugs
What are the top-rated 1971 Chevrolet C10 Pickup Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1971 Chevrolet C10 Pickup based on customer reviews/ratings are:
from
$7.49
(184)
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
“I used these type before.”
from
$4.99
(49)
OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, UR4
“302 Ford works good again”
from
$52.99
(36)
High-Performance Shorty Spark Plugs for Header Clearance
“Perfect great plugs for my Build. Great service to THANK YOU!”
