1971 AMC Javelin Drivetrains

Popular 1971 AMC Javelin Drivetrains Categories

Essential Drivetrains for 1971 AMC Javelins

Yukon Gear – Master Overhaul Kit For Model 20 Differential (Part No.14108)

Master Overhaul Kit For Model 20 Differential

from

$334.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits AMC Model 20
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Model 20 Outer Axle Seal For Tapered Axles (Part No.30190)

Model 20 Outer Axle Seal For Tapered Axles

from

$10.99
Model 20 outer axle seal for tapered axles.Yukon Mighty seal.

Product Features:
  • Rear outer axle seal
  • Fits AMC Model 20
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Model 20 In A 3.31 Ratio (Part No.24521)

High Performance Ring & Pinion Gear Set For Model 20 In A 3.31 Ratio

from

$469.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits AMC Model 20
  • 8.875″ ring gear diameter
  • 28 spline pinion
  • 8 ring gear bolts
  • 3.31 ratio
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-555)

Differential Pinion Yoke Assembly

from

$79.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Standard Open Carrier Case & Spiders, Amc Model 35, 3.54 & Up (Part No.20062)

Standard Open Carrier Case & Spiders, Amc Model 35, 3.54 & Up

from

$549.99
Model 35 standard Open carrier loaded, 3.54 & up + 3.27, 1-5/8″ tall, complete, w/ bearings.

Product Features:
  • Standard open carrier case and spiders
  • Fits AMC Model 35
  • 3.54 and up ratio only
  • Includes ring gear bolts, carrier bearings and races, and roll pin
See More

Yukon Gear – Set Up Bearing (Part No.56045)

Set Up Bearing

from

$153.99
M802048 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits M802048 pinion bearing
  • Easily slips on and off pinion journal to allow for easier pinion depth adjustment
See More

Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)

Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5"

from

$5.99
Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.

Product Features:
  • Screw in axle stud for AMC Model 35
  • 1/2″ x 20 thread
  • 1.5″ long
See More

Yukon Gear – Model 35 C/Clip (Part No.33076)

Model 35 C/Clip

from

$10.99
Model 35 C/clip.

Product Features:
  • c-clip for AMC Model 35
See More

Powertrax – No-Slip Traction System (Part No.9201202900)

No-Slip Traction System

from

$522.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    USA Standard Gear – Master Overhaul Kit for the ‘Model 20 Differential (Part No.37065)

    Master Overhaul Kit for the 'Model 20 Differential

    from

    $248.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits AMC Model 20
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Yukon Gear – Positraction Internals For Model 35 With 27 Spline Axles (Part No.16130)

    Positraction Internals For Model 35 With 27 Spline Axles

    from

    $462.99
    Yukon positraction internals for Model 35 with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits AMC Model 35 Trac Loc positraction
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt, clutches, and spider gear thrust washers.
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $10.49


    Product Features:
    • SOLID SPACER FORD 8.8″ & 9″
    See More

    Yukon Gear – Model 20 Tracloc Clutch Kit (Part No.16165)

    Model 20 Tracloc Clutch Kit

    from

    $137.99
    Model 20 TracLoc clutch kit.

    Product Features:
    • Clutch kit
    • Fits AMC Model 35 Trac Loc positraction
    • Steel clutches
    See More

    Yukon Gear – Long Yoke For Model 35 With A 1330 U/Joint Size (Part No.41099)

    Long Yoke For Model 35 With A 1330 U/Joint Size

    from

    $242.99
    Yukon long yoke for Model 35 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. Not common. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits AMC Model 35
    • 26 spline
    • 1330 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.062″ cap diameter
    • Strap style
    See More

    Yukon Gear – Model 20 Gasket (Part No.23025)

    Model 20 Gasket

    from

    $15.99
    Model 20 gasket.

    Product Features:
    • Cover gasket
    • Fits AMC Model 20
    See More

    Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)

    Zip Locker Bulkhead Fitting Kit

    from

    $36.99
    Product Features:
    • Bulkhead fitting kit
    • Includes bulkhead fitting, outer fitting and o-ring
    See More

    Yukon Gear – Model 35 Standard Open Cross Pin, Roll Pin Design, 0.685" Dia (Not Tracloc) (Part No.33319)

    Model 35 Standard Open Cross Pin, Roll Pin Design, 0.685" Dia (Not Tracloc)

    from

    $23.99
    Model 35 standard Open cross pin, roll PIN design, 0.685″ DIA (NOT TracLoc).

    Product Features:
    • Cross pin shaft
    • Fits AMC Model 35
    • Roll pin design
    • 0.685″ diameter
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each)

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

    Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each)

    from

    $3.99
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – Pinion Seal For Model 20 And Model 35 (Part No.30079)

    Pinion Seal For Model 20 And Model 35

    from

    $9.99
    Pinion seal for Model 20 and Model 35.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits AMC Model 20 and AMC Model 35
    See More

    USA Standard Gear – Spartan Locker For Model 35 With 27 Spline Axles And A 1625" Carrier, Includes Heavy-Duty Cross Pin (Part No.17008)

    Spartan Locker For Model 35 With 27 Spline Axles And A 1625" Carrier, Includes Heavy-Duty Cross Pin

    from

    $659.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits AMC Model 35 with 27 spline axles and 1.620″ side gear bore
    • Made from 9310 steel for added strength
    • Replaces the spiders in a standard carrier case
    See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)

    O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing

    from

    $13.99
    Product Features:
    • O-ring for seal housing
    • Fits Dana Spicer 30 and AMC Model 35
    See More

    Yukon Gear – Model 35 Roll Pin For Cross Pin Shaft, 0.190" Diameter (Part No.33320)

    Model 35 Roll Pin For Cross Pin Shaft, 0.190" Diameter

    from

    $5.99
    Model 35 roll pin for cross pin shaft, 0.190″ DIA.

    Product Features:
    • Roll pin
    • Fits AMC Model 35
    See More

    Yukon Gear – Axle Spacer For Dana 44 19 Spline & Amc Model 20 – Standard & Trac Loc, Not Powr Lok (Part No.33535)

    Axle Spacer For Dana 44 19 Spline & Amc Model 20 - Standard & Trac Loc, Not Powr Lok

    from

    $32.99
    Product Features:
    • Axle spacer button
    • Fits Dana 44 with 19 spline axles and AMC Model 20
    • Trac Loc positraction only
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 13889)

    Differential Cover Gasket

    from

    $11.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Upgrade your 1971 AMC Javelin with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1971 AMC Javelin, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your AMC or enhancing its overall performance, Drivetrains are key to keeping your Javelin functioning at its best. At Advance Auto Parts, we offer a wide selection of 213 Drivetrains for the 1971 AMC Javelin, designed to meet your needs without breaking the bank. From Universal Joint replacements to Spindles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1971 AMC Javelin at great prices. Our Drivetrains inventory for this model ranges from just $1.99 to $1,566.99, with an average price of $163.92. Our 213 Drivetrains in stock come from 13 trusted brands, so you’re sure to find the right part for your 1971 AMC Javelin without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1971 AMC Javelin, we stock popular OEM and aftermarket Drivetrains from top names like Moog, National, Driveworks, and more. Moog Drivetrains start at just $9.99 and boast an impressive 4 stars average rating from customers. National and Driveworks also bring quality to the table, with Drivetrains available starting at $6.49, and at an average 4 stars rating. With 11,264 customer reviews and counting, our 1971 AMC Javelin Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1971 AMC Javelin is always ready to roll. We’re committed to providing you with everything you need to keep your Javelin in top shape, all in one place. Start shopping confidently below for your 1971 AMC Javelin!

    Best-Selling Universal Joints for 1971 AMC Javelins

    Enhance the driving experience in your AMC with 22 quality Universal Joint components, starting at $4.49.

    Spicer – Universal Joint (Part No.5-153X)

    Universal Joint

    from

    $28.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)

    Universal Joint U-Bolt Kit

    from

    $9.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 353, 354, 361, 369 & 497
    • Fits 1-1/16″ bearings
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

    Greaseable Premium Universal Joint

    from

    $19.99
    Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

    Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Driveworks – Universal Joint (Part No.DW-369)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Neapco – Universal Joint (Part No.1-0154)

    Universal Joint

    from

    $6.49
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.1-0153)

    Universal Joint

    from

    $4.49
    Universal Joint
    See More

    Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)

    1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts

    from

    $18.99
    1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

    Product Features:
    • u-joint strap kit
    • Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
    • 1310 and 1330 u-joint size
    • Includes two straps and four bolts
    See More

    Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

    1310 U/Joint With Zerk Fitting On Cross

    from

    $44.99
    Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

    1310 To 1330 Adapter U/Joint

    from

    $59.99
    Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
    See More

    Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

    Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts

    from

    $34.99
    1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

    Product Features:
    • u-joint u-bolt kit
    • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
    • 1310 u-joint size
    • Includes two u-bolts and four nuts
    See More

    Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

    1350 To 1410 Conversion U/Joint

    from

    $78.99
    Yukon 1350 to 1410 conversion u/joint.
    See More

    Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

    1310 To Mechanics 3R Adapter U/Joint

    from

    $109.99
    Yukon 1310 to Mechanics 3R adapter U/Joint.
    See More

    Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

    1350 Lifetime Series U/Joint

    from

    $63.99
    Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

    1330 Dual-Size Cap U/Joint

    from

    $61.99
    Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
    See More

    Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

    1350 U/Joint With Zerk Fitting

    from

    $51.99
    Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-555)

    Differential Pinion Yoke Assembly

    from

    $79.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)

    1330 Lifetime U/Joint

    from

    $53.99
    1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1330 U/Joint With Zerk Fitting (Part No.42002)

    1330 U/Joint With Zerk Fitting

    from

    $51.99
    Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

    1310 Lifetime U/Joint

    from

    $57.99
    1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

    1350 To Mechanics 3R Adaptor U/Joint

    from

    $111.99
    Yukon 1350 to Mechanics 3R adaptor U/joint.
    See More

    Most Popular 1971 AMC Javelin Spindles

    Customize your AMC with 6 Spindles products like Spindle Lock Nuts, Spindle Retainers, and Spindle Lock Nut Thrust Washers, all priced under $4.99.

    Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

    Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.

    from

    $3.49
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each)

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

    Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each)

    from

    $3.99
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Washer – I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (sold by each) (Part No.618-017)

    Spindle Washer - I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (sold by each)

    from

    $3.29
    This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Washer – I.D. 25/32 In. O.D. 1-9/16 In. Thickness 1/8 In. (sold by each) (Part No.618-011)

    Spindle Washer - I.D. 25/32 In. O.D. 1-9/16 In. Thickness 1/8 In. (sold by each)

    from

    $3.29
    This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Top Picks for 1971 AMC Javelin Drive Shafts and Axles

    Upgrade AMC Javelins with top-quality Drive Shafts and Axles parts, including 16 OEM and aftermarket selections for your 1971 model.

    Spicer – Universal Joint (Part No.5-1310X)

    Universal Joint

    from

    $35.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    National – Bearings (Part No.A-5)

    Bearings

    from

    $16.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.307-L)

    Bearings

    from

    $37.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Model 20 Inner Axle Seal (Part No.30175)

    Model 20 Inner Axle Seal

    from

    $9.99
    Model 20 inner axle seal.Yukon Mighty seal.

    Product Features:
    • Rear inner axle seal
    • Fits AMC Model 20
    See More

    Yukon Gear – Model 20 Outer Axle Seal For Tapered Axles (Part No.30190)

    Model 20 Outer Axle Seal For Tapered Axles

    from

    $10.99
    Model 20 outer axle seal for tapered axles.Yukon Mighty seal.

    Product Features:
    • Rear outer axle seal
    • Fits AMC Model 20
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    National – Multi Purpose Seal (Part No.482208)

    Multi Purpose Seal

    from

    $6.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Yukon Gear – Yoke For Model 20 With A 1310 U/Joint Size (Part No.41096)

    Yoke For Model 20 With A 1310 U/Joint Size

    from

    $149.99
    Yukon yoke for Model 20 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits AMC Model 20
    • 28 spline
    • 1310 u-joint size
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Outside snap ring design
    • U-bolt style
    See More

    Spicer – SPICER U-JOINT (Part No.5-1310-1X)

    SPICER U-JOINT

    from

    $44.99
    SPICER U-JOINT

    Yukon Gear – Axle Spacer For Dana 44 19 Spline & Amc Model 20 – Standard & Trac Loc, Not Powr Lok (Part No.33535)

    Axle Spacer For Dana 44 19 Spline & Amc Model 20 - Standard & Trac Loc, Not Powr Lok

    from

    $32.99
    Product Features:
    • Axle spacer button
    • Fits Dana 44 with 19 spline axles and AMC Model 20
    • Trac Loc positraction only
    See More

    Yukon Gear – Model 35 C/Clip (Part No.33076)

    Model 35 C/Clip

    from

    $10.99
    Model 35 C/clip.

    Product Features:
    • c-clip for AMC Model 35
    See More

    Yukon Gear – Model 20 Axle End Play Shim (Part No.55060)

    Model 20 Axle End Play Shim

    from

    $9.29
    Model 20 0.003″ axle end play shim.

    Product Features:
    • Axle end play shim for AMC Model 20
    • 0.003″ thick
    See More

    Yukon Gear – Model 20 Axle End Play Shim (Part No.55061)

    Model 20 Axle End Play Shim

    from

    $8.99
    Model 20 0.005″ axle end play shim.

    Product Features:
    • Axle end play shim for AMC Model 20
    • 0.005″ thick
    See More

    Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

    Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

    from

    $5.99
    Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

    Product Features:
    • Axle stud for AMC Model 20 and Model 35
    • 1/2″ x 20 thread
    • 0.620″ knurl diameter
    • 1.625″ long
    See More

    Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)

    Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5"

    from

    $5.99
    Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.

    Product Features:
    • Screw in axle stud for AMC Model 35
    • 1/2″ x 20 thread
    • 1.5″ long
    See More

    Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

    Replacement Axle Stud For Dana 44 & Model 35

    from

    $5.99
    Product Features:
    • Rear axle stud for Dana Spicer 44 and AMC Model 35
    • 1/2″ x 20 thread
    • 0.618″ knurl diameter
    • 1 15/32″ long
    • 31/64″ shoulder length
    See More

    In-Demand Transfer Cases for 1971 AMC Javelins

    Select from 4 premium Transfer Cases parts for your 1971 AMC Javelin, with prices ranging from $6.49 to $15.99.

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

    Taper Bearing Cup

    from

    $6.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    FAG US – CUP (Part No.M88010)

    CUP

    from

    $11.29
    CUP

    Most Sold 1971 AMC Javelin Differentials

    Explore our best-selling AMC parts for the 1971 Javelin among 165 OEM and aftermarket options starting from $1.99.

    Motive Gear – Differential Crush Sleeve (Part No.3507575)

    Differential Crush Sleeve

    from

    $2.49


    Product Features:
    • CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D35-411)

    Differential Ring and Pinion

    from

    $196.99


    Product Features:
    • DANA-35 R/P 4.11 STD
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 13089)

    DIFFERENTIAL GASKET

    from

    $6.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Bearings (Part No.M802048)

    Bearings

    from

    $23.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Nut (Part No.379570S)

    Differential Pinion Nut

    from

    $6.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

    Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24

    from

    $11.99
    Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

    Product Features:
    • Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
    • 3/8″ x 24 thread
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM88610)

    Bearings

    from

    $15.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Replacement Ring Gear Bolt For Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50 – 7/16" X 20 (Part No.33040)

    Replacement Ring Gear Bolt For Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50 - 7/16" X 20

    from

    $3.99
    Replacement ring gear bolt for Model 20, Grand Cherokee 35, “Super” Dana 30 & Dana 50. 7/16″ x 20.

    Product Features:
    • Ring gear bolt for AMC Model 20, “Super” 35, Dana Spicer “Super” 30 and Dana Spicer 50
    • 7/16″ 20 thread
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 13889)

    Differential Cover Gasket

    from

    $11.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

    Tapered Roller Bearing

    from

    $16.99
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Crush Sleeve (Part No.33093)

    Crush Sleeve

    from

    $10.99
    Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

    Product Features:
    • Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
    • 0.495″ tall
    See More

    National – Bearings (Part No.HM88648)

    Bearings

    from

    $27.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Seal (Part No.470331N)

    Multi Purpose Seal

    from

    $18.79
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

    Taper Bearing Cup

    from

    $7.29
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Crush Sleeve (Part No.33085)

    Crush Sleeve

    from

    $9.99
    Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

    Product Features:
    • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
    • 0.480″ tall
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

    Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles

    from

    $15.99
    Product Features:
    • Carrier shim kit for Dana Spicer 30 with 30 spline axles
    See More

    Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)

    Ring Gear Bolt

    from

    $1.99


    Product Features:
    • BOLT 9″ FORD OPEN R.G. SAME AS M-4216A200
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    Driveworks – Oil Seal (Part No.S-470331N)

    Oil Seal

    from

    $9.49
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    USA Standard Gear – Standard Spider Gear Set For Amc Model 35 With 1.560" Side Gear Bore (Part No.39030)

    Standard Spider Gear Set For Amc Model 35 With 1.560" Side Gear Bore

    from

    $172.99
    USA Standard Gear standard spider gear set for AMC Model 35 with 1.560″ side gear bore. (used in ’94 and newer models).

    Product Features:
    • Fits AMC Model 35 with open differential and 1.560″ side gear bore
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

    Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

    from

    $5.99
    Product Features:
    • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
    • 0.030″ thick
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Motive Gear – Differential Pinion Seal (Part No.470331N)

    Differential Pinion Seal

    from

    $17.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R35JR)

    Differential Bearing Kit - Koyo

    from

    $108.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • DANA 35 JEEP 1980-06 MASTER BRG KIT ’97 UP DANA 35 DODGE DAKOTA FRONT
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1112)

    Differential Pinion Shim Kit

    from

    $16.99


    Product Features:
    • PINION SHIM-DANA 30,35.50
    See More

    Yukon Gear – Model 35 Standard Open Side Gear Thrust Washer (Part No.33292)

    Model 35 Standard Open Side Gear Thrust Washer

    from

    $9.99
    Model 35 standard Open side gear Thrust washer. Fits 1.625″ side gear bore only.

    Product Features:
    • Side gear thrust washer
    • Fits AMC Model 35
    See More

    Yukon Gear – Model 20 Gasket (Part No.23025)

    Model 20 Gasket

    from

    $15.99
    Model 20 gasket.

    Product Features:
    • Cover gasket
    • Fits AMC Model 20
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D35-373)

    Differential Ring and Pinion

    from

    $191.99


    Product Features:
    • DANA-35 R/P 3.73 STD
    See More

    Yukon Gear – Trail Repair Kit For Model 35 With 1310 Size U/Joint And Straps (Part No.32287)

    Trail Repair Kit For Model 35 With 1310 Size U/Joint And Straps

    from

    $221.99
    Yukon trail repair kit for Model 35 with 1310 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

    Product Features:
    • Fits AMC Model 35
    • 1310 u-joint size
    • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
    See More

    Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)

    Air Line Repair Kit, Zip Locker

    from

    $52.99
    Air line repair kit, ZIP locker.

    Product Features:
    • Air line repair kit
    • Includes 20′ air line and two repair fittings
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1130)

    Differential Carrier Shim Kit

    from

    $18.99


    Product Features:
    • CARRIER SHIMS – AMC MODEL 20
    See More

    Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)

    Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25"

    from

    $17.99
    Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo

    Product Features:
    • Pinion depth shims for AMC Model 35 and Chrysler 7.25″
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $10.49


    Product Features:
    • SOLID SPACER FORD 8.8″ & 9″
    See More

    Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)

    O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing

    from

    $13.99
    Product Features:
    • O-ring for seal housing
    • Fits Dana Spicer 30 and AMC Model 35
    See More

    Yukon Gear – Standard Open Spider Gear Kit For Model 35 With 27 Spline Axles – Hubs Have 1.625" Diameter (Part No.16129)

    Standard Open Spider Gear Kit For Model 35 With 27 Spline Axles - Hubs Have 1.625" Diameter

    from

    $275.99
    Yukon standard open spider gear kit for Model 35 with 27 spline axles. hubs have 1.625″ diameter (used in ’93 and older models). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits AMC Model 35 open differential with 1.620″ side gear bore
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    USA Standard Gear – Master Overhaul Kit for the ‘Model 20 Differential (Part No.37065)

    Master Overhaul Kit for the 'Model 20 Differential

    from

    $248.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits AMC Model 20
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D35-488)

    Differential Ring and Pinion

    from

    $187.99


    Product Features:
    • DANA-35 R/P 4.88 STD
    See More

    Yukon Gear – Standard Open Spider Gear Kit For Model 35 With 27 Spline Axles (Part No.16128)

    Standard Open Spider Gear Kit For Model 35 With 27 Spline Axles

    from

    $197.99
    Yukon standard open spider gear kit for Model 35 with 27 spline axles. hubs have 1.560″ diameter (used in ’94 and newer models). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects. *May work with ’93 model with 1.5600″ journal.

    Product Features:
    • Spider gear kit
    • Fits AMC Model 35 open differential with 1.560″ side gear bore
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D35-355)

    Differential Ring and Pinion

    from

    $187.99


    Product Features:
    • DANA-35 R/P 3.55 RATIO
    See More

    Yukon Gear – Pinion Install Kit For Model 20 Differential (Part No.13082)

    Pinion Install Kit For Model 20 Differential

    from

    $175.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits AMC Model 20
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    USA Standard Gear – Master Overhaul Kit for the Model 35 Differential (Part No.37066)

    Master Overhaul Kit for the Model 35 Differential

    from

    $225.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits AMC Model 35
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Yukon Gear – Super Carrier Shim Kit For Model 35 (Part No.55063)

    Super Carrier Shim Kit For Model 35

    from

    $54.99
    Model 35 differential carrier Supershim kit.

    Product Features:
    • Super carrier shim kit for AMC Model 35
    • Interlocking design makes installation much easier
    See More

    Top-Rated Drivetrains Brands For Your 1971 AMC Javelin

    Shop for the best-rated brands offering Drivetrains and other products for your 1971 AMC Javelins. Below you’ll find some of our best rated Drivetrains from Moog, National, and Driveworks, and more. Drivetrains from these brands that fit a 1971 Javelin start at just $6.49 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Moog 1971 AMC Javelin Drivetrains

    When it comes to maintaining or upgrading your 1971 AMC Javelin, using quality Drivetrains is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Drivetrains, specifically designed for the 1971 AMC Javelin. With over 4 Moog brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.99, with an average price of just $23.99. Plus, with over 151 customer reviews and an average rating of 4 stars, you can trust that our Moog Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Greaseable Premium Universal Joint
    from
    $19.99

    (82)

    Greaseable Premium Universal Joint

    “Great product”

    Universal Joint U-Bolt Kit
    from
    $9.99

    (4)

    Universal Joint U-Bolt Kit

    “I used these to replace the factory originals that had over 80K miles on a 1964 Chevelle Malibu. I had a strange click in the differential area and s”

    Non-Greaseable Super Strength Universal Joint
    from
    $32.99

    (28)

    Non-Greaseable Super Strength Universal Joint

    “installed as needed”

    Popular National 1971 AMC Javelin Drivetrains

    National auto parts is one of the highest quality Drivetrain brands in the market. Any 1971 AMC Javelin owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1971 Javelin, Advance Auto Parts carries a full inventory of 11 National Drivetrains. Plus you will be keeping your AMC in peak condition while saving money because prices on these National Drivetrains range from $6.99 to $43.99, plus, with more than 61 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Bearings
    from
    $27.49
    This product is not rated

    Bearings

    “”

    Bearings
    from
    $15.49
    This product is not rated

    Bearings

    “”

    Bearings
    from
    $9.49
    This product is not rated

    Bearings

    “”

    FAQs for 1971 AMC Javelin Drivetrains

    Which Drivetrains are best-sellers for 1971 AMC Javelins?

    Out of 213 Drivetrains that fit 1971 AMC Javelins, the following parts are the top sellers:

    What’s the price range for 1971 AMC Javelin Drivetrains?

    Drivetrain prices for the 1971 AMC Javelin start at $1.99 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1971 AMC Javelin?

    The average price for Drivetrains for the 1971 AMC Javelin is $163.92. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other AMC Javelin model years?

    Yes, we currently carry Drivetrains for 6 model years of AMC Javelins between 1968 and 1974. Drivetrains are bought most frequently for the following model years: 1974, 1973, 1972, 1970, 1969, and 1968.

    What are the cheapest Drivetrains for my 1971 AMC Javelin?

    The cheapest 1971 AMC Javelin Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1971 AMC Javelin?

    Out of 11,264 reviews by customers, our 1971 AMC Javelin Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1971 AMC Javelin and their top-rated products:

    What types of Drivetrains do you sell for my 1971 AMC Javelin?

    Can I get help with 1971 AMC Javelin Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about AMC Drivetrains and more.

    What is your return policy for AMC Javelin Drivetrains?

    Advance Auto Parts keeps returns simple. For new AMC Javelin Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.