1970 Jeep J-3600 Performance and Racing Products

Essential 1970 Jeep J-3600 Performance and Racing Products

Mr. Gasket – Radiator Cap (Part No.2481)

Radiator Cap

from

$16.99
Cap off your radiator with a gleaming chrome plated filler cap. Made to last.

Product Features:
  • Chrome radiator caps
  • Made to last
  • Skin packaged
See More

Accel – Super Coil Ignition Coil (Part No.140001)

Super Coil Ignition Coil

from

$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)

Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)

from

$397.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More

Edelbrock – Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.1826)

Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR)

from

$464.99
New or reconditioned 650cfm. Square-flange. Electric choke without EGR. Primary jet 0.095. Secondary jet 0.098. Metering Rod 0.065 x 0.047. Dual plane intake. Spring loaded needles and seat increase performance. New qwik-tune adjustable secondary air valve. Distinctive black accented hardware. Lightweight ball burnished aluminum. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage.

Product Features:
  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
See More

Hooker Headers – Super Competition Header Gasket (Part No.10804HKR)

Super Competition Header Gasket

from

$18.99
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:
  • Tear Resistant
  • Precisely Cut To Match Header
See More

Omix – Exhaust Manifold Gasket Set (Part No.17451.03)

Exhaust Manifold Gasket Set

from

$19.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.

Product Features:
  • Fiber
  • Heat Resistant
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Piston Ring Set (Part No.17430.23)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .060 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Rancho – Single Steering Damper Kit (Part No.RS97355)

Single Steering Damper Kit

from

$113.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.

Product Features:
  • COMPATIBILITY — Designed for a variety of trucks and SUVs from Chevrolet®, GMC®, Ford®, Dodge®, Jeep®, Plymouth® and International®
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
  • ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
  • EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
  • RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
  • PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
See More

Omix – Driveshaft U-Joint (Part No.16585.02)

Driveshaft U-Joint

from

$38.49
Are your U-joints making noise? Or has one broken? When they do break, they usually damage the axle shafts or driveshafts too. That’s a lot of unnecessary work and expense. U-joint replacement is a routine maintenance chore. Omix-ADA offers high quality r

Product Features:
  • Front/Rear
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Kit (Part No.17452.06)

Timing Kit

from

$88.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • 3 Piece Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Airaid – Air Filter (Part No.800-314)

Air Filter

from

$55.99
304 stainless steel mesh. 5 layer construction. Most durable filters in the industry. Outperforms the others in clean air testing. Assures cleanest air possible from washable filter. Provides balance between air flow and peak filtration. Lifetime no hassle warranty.

Product Features:
  • Multi-Layer Construction
  • Most Durable Filters In The Industry
  • Outperforms The Others In Clean Air Testing
  • Assures Cleanest Air Possible From Washable Filter
  • Washable And Reusable
  • Made In The USA
  • Lifetime No Hassle Warranty
See More

Airaid – Replacement Air Filter (Part No.800-311)

Replacement Air Filter

from

$55.99
This AIRAID Direct-Fit Replacement Filter is a drop-in replacement for your vehicle’s stock paper air filter that is designed to improve horsepower and acceleration. The air filter is constructed with multiple layers of filter media and provides significant improvements in air flow and filtration compared to typical replacement filters with the added benefit of being washable and reusable. Why throw money away on a paper filter each time the old one gets dirty when you can upgrade to a serviceable AIRAID Direct-Fit Replacement Filter for often less than the cost of two stock replacements? Installation takes only minutes and is as simple as replacing your stock filter.
See More

Omix – Exhaust Manifold (Part No.17624.13)

Exhaust Manifold

from

$227.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.

Product Features:
  • Left Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Exhaust Manifold (Part No.17624.06)

Exhaust Manifold

from

$261.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a cracked exhaust manifold. Omix-ADA offers high quality exhaust manifolds and gaskets to solve the problem.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Tie Rod End Tube (Part No.18046.03)

Tie Rod End Tube

from

$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Distributor Cap And Rotor Kit

from

$40.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Accel – Distributor Cap And Rotor Kit (Part No.8120)

Distributor Cap And Rotor Kit

from

$40.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)

Unilite Breakerless Ignition Conversion Kit

from

$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$25.99


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Accel – Contact And Condenser Kit (Part No.8104)

Contact And Condenser Kit

from

$56.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

Product Features:
  • High Performance Points and Condenser
  • With Integral Conductor
See More

Accel – Contact And Condenser Kit (Part No.8101)

Contact And Condenser Kit

from

$51.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

Product Features:
  • High Performance Points and Condenser
  • With Integral Conductor
See More

Accel – High Performance Contact Set 32 Oz (Part No.110128)

High Performance Contact Set 32 Oz

from

$46.99
ACCEL high-performance 32 ounce points resist point float up to 6,500 RPM. Extra-thick contact arms prevent flexing. Large tungsten contacts provide crisp circuit-breaking for peak coil output. Phenolic rubbing blocks endure heavy spring loads.

Product Features:
  • Extra Thick Contact Arms
  • Large Radius Tungsten Contacts
  • High Strength Phenolic Rubbing Blocks
  • Prevents Points Float
  • Moisture-Proof Buna-N Condenser
See More

Mallory – Kit (Part No.401)

Kit

from

$14.99
Kit

MSD Ignition – Distributor; 6-cyl. AMC Jeep 232-258; 4.0L (Part No.8516)

Distributor; 6-cyl. AMC Jeep 232-258; 4.0L

from

$512.99
There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet Distributors to deliver accurate trigger signals and are maintenance-free! This pick-up never requires adjustment and simply plugs right into an MSD Ignition Control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any rpm and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion. Both distributors are supplied with a high quality cap, rotor and gear. There is even a vacuum advance canister for street cruising economy!

Product Features:
  • Designed For Street/Performance Use w/Mech or Vacuum Advance
  • Must Be Used w/An MSD Ignition Control
  • Supplied w/Socket Style Distributor Cap And Rotor
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
See More

1970 Jeep J-3600 Performance and Racing Products

You count on your 1970 Jeep J-3600 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 28 Performance and Racing Products ranging in price from $14.99 to $512.99, you’re sure to find everything you need for your 1970 Jeep J-3600.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 9 different brands like Accel, Edelbrock, and Mr. Gasket. 1970 Jeep J-3600 Performance and Racing Products start as low as $14.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 128 extensive product reviews on 1970 Jeep J-3600 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Coil; Blaster 2; High Performance with 4.3 stars and Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) with 3.8 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1970 Jeep J-3600 below to get started!

Top-Rated Performance and Racing Products Brands For Your 1970 Jeep J-3600

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1970 Jeep J-3600 running right for years to come. In our inventory you’ll find brands like Accel, Edelbrock, Mr. Gasket, and even more.

Popular Mr. Gasket Performance and Racing Products

You’ll find popular Mr. Gasket brand products across Performance Radiators. All are waiting to get your 1970 Jeep J-3600 back on the road. Some of the top-rated Mr. Gasket products in these categories are:
Radiator Cap
from $16.99
(1)
Radiator Cap
Performance Radiator Caps

Top-Rated Accel Performance and Racing Products


If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1970 Jeep J-3600, and some of our most reviewed Accel parts include:
Super Stock Coil
from $40.99
(54)
Super Stock Coil
Performance Coils
Distributor Cap And Rotor Kit
from $40.99
(3)
Distributor Cap And Rotor Kit
Performance Distributor Cap and Rotor Kits
Contact And Condenser Kit
from $51.99
(1)
Contact And Condenser Kit
Performance Points and Condensers

FAQs for 1970 Jeep J-3600 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1970 Jeep J-3600?

Out of 28 Performance and Racing Products for the 1970 Jeep J-3600, the most popular in our inventory are:
Thermocap Radiator Cap
from $54.99
This product is not rated
Thermocap Radiator Cap
Performance Radiator Caps
Super Coil Ignition Coil
from $98.99
This product is not rated
Super Coil Ignition Coil
Performance Coils

What are the top-rated 1970 Jeep J-3600 Performance and Racing Products?

Top-rated Performance and Racing Products for your 1970 Jeep J-3600 based on customer reviews/ratings are:
Coil; Blaster 2; High Performance
from $71.99
(20)
Coil; Blaster 2; High Performance
“MATCHED PERFECT TO OLD UNIT”
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
from $397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
Distributor; 6-cyl. AMC Jeep 232-258; 4.0L
from $512.99
(5)
Distributor; 6-cyl. AMC Jeep 232-258; 4.0L
“Work’s great. My problem was it would not shut off.”