1970 GMC P15/P1500 Van Engine Parts

Below you will find various in-demand GMC Engine Parts, components and accessories for your 1970 P15/P1500 Van. Advance Auto Parts has popular P15/P1500 Van parts like Engine Gaskets and Seals, Camshafts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other P15/P1500 Van model years including 1967, 1968, 1969, 1971, 1972, 1973, 1974 and more. Select a category of 1970 GMC P15/P1500 Van Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1970 GMC P15/P1500 Van Engine Parts Categories

Valve Covers

Valve Cover Gaskets

Oil Pumps

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Harmonic Balancers

Cylinder Head Gasket Sets

Cylinder Head Gaskets

Engine Camshaft Bolts

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

Engine Dress Up Kits

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Rocker Arms

Engine Valve Stem Seals

Oversized Main Bearings

Standard Rod Bearing Sets

Oil Pump Kits

Standard Piston Rings

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Remanufactured Engines

Engine Cylinder Head Nuts

Engine Timing Cover Bolt Sets

Engine Oil Deep Sump Kits

Engine Oil Pump Primers

Engine Assembly Lube

Essential Engine Parts for 1970 GMC P15/P1500 Vans

from

$106.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$248.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Swirl-Cool engine oil cooler kit
Size: 1-1/2″ x 6-1/2″ x 18″
Heavy-duty applications
Chevrolet V8 applications
Size: 1.5 in. x 6.5 in. x 18 in.
Heavy duty applications
Specifically designed for Chevrolet V8 applications with metal line kit for easier installation
Two-pass design for increased cooling
Size: 1.5 in. x 6.5 in. x 18 in.
Heavy duty applications
Specifically designed for Chevrolet V8 applications with metal line kit for easier installation
Two-pass design for increased cooling

from

$7.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$43.49

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$17.79

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$3.49

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components.

Product Features:

Precision engineered and made from high quality alloys
Provides recommended spring pressure with valve on seat and at maximum lift
Meets unique demands of performance engines
Delivers dependable performance and superior service life
Application-specific design for perfect fit and correct operation

from

$18.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$223.99

New Standard Replacement Engine Oil Pan, [Gasket Not Included]

Product Features:

Gasket Not Included
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. It’s durability and design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

Product Features:

Repairs That Leaky Rear Main Sail
Viton&reg: Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals

from

$69.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Reduces dramatically or eliminates bearing wear
Exacting tolerances
Meets or exceeds OEM specifications
Made with silicon to provide greater surface hardness

from

$37.99

Product Features:

Valve Cover Gasket

from

$13.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$80.99

Face of top rings coated with latest generation Plasma-Moly
Decreases friction
Very resistant to scuffing
Exacting tolerances
Meets or exceeds OEM specifications

from

$51.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$85.99

Far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders. Forged from 8740 chrome moly, all bolts feature generous under head radius and rolled threads for the utmost reliability. The threads are rolled after heat treating, which makes them about 1000 Percent longer fatigue life than most main bolts, which are threaded prior to heat treating. Available in the popular High Performance Series, which, at a nominal rating of 180,000 PSI, is a premium replacement for OEM fasteners, or the 200,000 PSI nominal rated Pro Series, application specific main bolts with reduced wrenching head and are designed for use in competition applications. Parallel ground, hardened washers are included with each kit.

Product Features:

Forged From Premium Grade 8740 Chrome Moly Steel
Generous Under Head Radius And Rolled Threads For The Utmost Reliability
Threads Are Rolled After Heat Treating, Which Makes Them About 1000 Percent Longer Fatigue Life Than Most Main Bolts, Which Are Threaded Prior To Heat Treating
Parallel Ground, Hardened Washers Are Included With Each Kit
Large Journal
Sold As A Kit
180,000 PSI

from

$42.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Application specific design to ensure a perfect fit and premium seal
Premium quality parts you can trust
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted

from

$17.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$71.99

Made In USA. Melling Engine Oil Priming Tools were developed as a way for engine builders to safely pre-prime the engine with oil prior to the initial engine startup. The Priming tool, with the use of a standard drill circulates oil to all of the critical areas of the new engine quickly and safely.

Product Features:

Priming tool circulates oil through critical areas of a new engine before engine start up
Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$358.99

Product Features:

Features a high definition “Chevrolet” script logo and a wrap-around finned design to add classic muscle styling to your engine bay
Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt pattern
Die-cast aluminum construction ensures high quality details, and reduces opportunities for valve cover flange warping and oil leaks
3.3″ tall with a solid body for non-emissions applications or custom crankcase ventilation setups
Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

from

$10.49

Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Formulated for pre-lubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$71.99

Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$10.79

Anchor 2282 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1963-1974
Weight approx: 2 Lbs
Part Group: 2282, 2282

from

$42.99

A new Melling high performance pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed high performance oil pump pick-up tube/screen be a part of every oil pump installation when a higher quality oil pump screen is required. Melling high performance oil pump pick-up tubes/screens are manufactured with stronger welds and in some cases designed with additional reinforced mountings, include mounting bolts and are supplied with protective coatings.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineered for maximum fit and function
Designed for long-life and worry-free performance
Phosphate coated for rust protection
Includes screen mounting gasket

from

$16.99

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$36.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

Upgrade your 1970 GMC P15/P1500 Van with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1970 GMC P15/P1500 Van, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Engine Parts are key to keeping your P15/P1500 Van functioning at its best. At Advance Auto Parts, we offer a wide selection of 143 Engine Parts for the 1970 GMC P15/P1500 Van, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1970 GMC P15/P1500 Van at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $5,984.99, with an average price of $382.79. Our 143 Engine Parts in stock come from 22 trusted brands, so you’re sure to find the right part for your 1970 GMC P15/P1500 Van without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1970 GMC P15/P1500 Van, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Melling, National, and more. Felpro Engine Parts start at just $15.99 and boast an impressive 4.6 stars average rating from customers. Melling and National also bring quality to the table, with Engine Parts available starting at $3.29, and at an average 4.3 stars rating. With 175 customer reviews and counting, our 1970 GMC P15/P1500 Van Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1970 GMC P15/P1500 Van is always ready to roll. We’re committed to providing you with everything you need to keep your P15/P1500 Van in top shape, all in one place. Start shopping confidently below for your 1970 GMC P15/P1500 Van!

Best-Selling Engine Gaskets and Seals for 1970 GMC P15/P1500 Vans

Enhance the driving experience in your GMC with 10 quality Engine Gaskets and Seal components, starting at $2.99.

show more show less

from

$15.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to help ensure a consistent and long-life seal
PRECISE DESIGN – Engineered to work with the embossed cover and pan flanges
PREVENTS OVERTIGHTENING – Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$16.99

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$37.99

Product Features:

Valve Cover Gasket

from

$103.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$87.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$57.99

Repairs That Leaky Rear Main Sail
Viton&reg: Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals

from

$36.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$29.99

GASKETS

from

$12.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$2.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Most Popular 1970 GMC P15/P1500 Van Camshafts

Customize your GMC with 7 Camshafts products like Camshaft Followers, Camshaft Plugs, and Engine Camshaft Bolts, all priced under $13.99.

show more show less

from

$13.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.99

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

Top Picks for 1970 GMC P15/P1500 Van Engine Mounts

Upgrade GMC P15/P1500 Vans with top-quality Engine Mounts parts, including 2 OEM and aftermarket selections for your 1970 model.

show more show less

from

$10.79

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1963-1974
Weight approx: 2 Lbs
Part Group: 2282, 2282

from

$79.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors(R) vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex(TM) performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance And Longevity
Will Handle Any And All Torque
Out Lasts Rubber

In-Demand Valve Cover and Cylinder Heads for 1970 GMC P15/P1500 Vans

Select from 27 premium Valve Cover and Cylinder Heads parts for your 1970 GMC P15/P1500 Van, with prices ranging from $0.43 to $1,047.00.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$60.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$22.99

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Manufactured for the repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$136.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$209.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 Psi Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$1047.00

16 Springs

from

$506.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Standard height valve cover with pre-installed internal oil baffles
Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

from

$487.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Standard height valve cover with pre-installed internal oil baffles
Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

from

$478.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Standard height valve cover with pre-installed internal oil baffles
Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

from

$429.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
Standard height valve cover with pre-installed internal oil baffles
Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

Magnum 1.6 Rocker, HE Pushrod, Guide Plate Kit Chevrolet 262-400 Small Block

from

$398.99

Magnum 1.6 Rocker, HE Pushrod, Guide Plate Kit Chevrolet 262-400 Small Block

Magnum 1.52 Rocker, HE Pushrod, Guide Plate Kit Chevrolet 262-400 Small Block

from

$389.99

Magnum 1.52 Rocker, HE Pushrod, Guide Plate Kit Chevrolet 262-400 Small Block

from

$358.99

Product Features:

Features a high definition “Chevrolet” script logo and a wrap-around finned design to add classic muscle styling to your engine bay
Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt pattern
Die-cast aluminum construction ensures high quality details, and reduces opportunities for valve cover flange warping and oil leaks
3.3″ tall with a solid body for non-emissions applications or custom crankcase ventilation setups
Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

from

$358.99

Product Features:

Precision manufactured with knock-out plugs for stock PCV (smog Control) and oil fill installations
Top cover surface may be used for engraving your name horizontally
Deep heat dissipating fins
Cast aluminum construction for even gasket sealing
Polished aluminum

from

$321.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$302.99

Product Features:

Precision manufactured with knock-out plugs for stock PCV (smog Control) and oil fill installations
Top cover surface may be used for engraving your name horizontally
Deep heat dissipating fins
Cast aluminum construction for even gasket sealing
Satin Black finish

from

$302.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
3.3″ tall (3.5″ overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

from

$281.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
3.3″ tall with a solid body for non-emissions applications or custom crankcase ventilation setups
Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

from

$272.99

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 Psi Tensile Strength
High Performance Head Bolts Are Stronger

from

$247.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
3.3″ tall (3.5″ overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

from

$236.99

Product Features:

Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
3.3″ tall (3.5″ overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

from

$136.99

TSP Valve Covers are constructed of high-quality materials and are available for any look and application. We?ve got cast aluminum valve covers for the classic or retro look and fabricated aluminum for racing. Our fabricated covers feature CNC-machined rails and are completely TIG welded. They offer excellent stability and valve train clearance along with great looks. So regardless of the application, we?ve got you ?covered.?

Product Features:

Mounting Style: Perimeter Bolt
Material: Fabricated Aluminum
Gasket: Not Included
Hardware: Not Included

from

$127.99

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids. A typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

Gasket bore – 4.035 inch: Compressed thickness – .040 inch
Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
Optimized sealing embossments seals extreme cylinder pressure
Provides excellent stability and reduces cylinder bore distortion.
Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
For high-performance street, drag race and oval track use

Most Sold 1970 GMC P15/P1500 Van Engine Timing Parts

Explore our best-selling GMC parts for the 1970 P15/P1500 Van among 12 OEM and aftermarket options starting from $8.49.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$22.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$27.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S390T Engine Timing Camshaft Sprocket (1 EA), S391 Engine Timing Crankshaft Sprocket (1 EA), C499 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$43.99

Aluminum cam gear, steel crank gear. feature “helical” tooth form for quiet operation, and precision machined bore for true fit. SET INCLUDES: 2524 Engine Timing Camshaft Gear (1 EA), 2537 Engine Timing Crankshaft Gear (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
Refer to our online catalog for detailed application-specific information

from

$11.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly

from

$19.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly
Nominally Rated At 170,000 Psi Tensile Strength
Super Tough Bolts
Compact 12 Point Fasteners

from

$111.99

ENG TIMING GEAR SET

from

$37.99

Lightweight Aluminum Construction. Features Helical Tooth Form For Quiet Operation, And Precision Machined Bore For True Fit.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$25.99

Gear Made From High Alloy Material. Features “Helical” Tooth Form For Quiet Operation, And Precision Machined Bore For True Fit.”

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$17.99

Gear Made From High Alloy Material. Features “Helical” Tooth Form For Quiet Operation, And Precision Machined Bore For True Fit.”

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$8.49

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top-Rated Engine Parts Brands For Your 1970 GMC P15/P1500 Van

Shop for the best-rated brands offering Engine Parts and other products for your 1970 GMC P15/P1500 Vans. Below you’ll find some of our best rated Engine Parts from Felpro, Melling, and National, and more. Engine Parts from these brands that fit a 1970 P15/P1500 Van start at just $3.29 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 1970 GMC P15/P1500 Van Engine Parts

When it comes to maintaining or upgrading your 1970 GMC P15/P1500 Van, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 1970 GMC P15/P1500 Van. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.99, with an average price of just $31.32. Plus, with over 9 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $15.99

(1)

VALVE COVER GASKET SET

“nice”

from $56.99

(5)

Engine Gasket Set

“quality parts ,great price”

from $20.99

(3)

Engine Crankshaft Seal Kit

“Fit perfect, no leaks.”

Popular Melling 1970 GMC P15/P1500 Van Engine Parts

Melling auto parts is one of the highest quality Engine Part brands in the market. Any 1970 GMC P15/P1500 Van owner should feel confident when installing genuine Melling parts in their vehicle. To ensure the best fit and performance for your 1970 P15/P1500 Van, Advance Auto Parts carries a full inventory of 3 Melling Engine Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Melling Engine Parts range from $3.29 to $43.99, plus, with more than 25 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $43.99

(13)

Stock Replacement OE Type Oil Pump

“Easy to install”

from $21.99

(7)

Stock Replacement Type Oil Pump Intermediate Shaft

“After checking several sources Advance Auto hadthe best value.”

from $3.29

(5)

Stock Replacement Oil Pump Shaft Guide

“This is what I needed. The only one around in New York that I could find…….”

FAQs for 1970 GMC P15/P1500 Van Engine Parts

Which Engine Parts are best-sellers for 1970 GMC P15/P1500 Vans?

Out of 143 Engine Parts that fit 1970 GMC P15/P1500 Vans, the following parts are the top sellers:

Engine Valve Lifter (5688698) – $13.99
Multi-Purpose Seal (3271684) – $17.99
Stock Replacement Type Oil Pump Intermediate Shaft (3681491) – $21.99

What’s the price range for 1970 GMC P15/P1500 Van Engine Parts?

Engine Part prices for the 1970 GMC P15/P1500 Van start at $0.43 and go up to $5,984.99 for the most premium parts.

What’s the average price of a Engine Part for a 1970 GMC P15/P1500 Van?

The average price for Engine Parts for the 1970 GMC P15/P1500 Van is $382.79. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other GMC P15/P1500 Van model years?

Yes, we currently carry Engine Parts for 6 model years of GMC P15/P1500 Vans between 1967 and 1974. Engine Parts are bought most frequently for the following model years: 1974, 1973, 1972, 1971, 1969, 1968, and 1967.

What are the cheapest Engine Parts for my 1970 GMC P15/P1500 Van?

The cheapest 1970 GMC P15/P1500 Van Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Sold by each) (16140188) – $1.99
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (3492265) – $2.99
Steel Cup Expansion Plug 2-7/64 In., Height 0.310 (sold by each) (22140588) – $2.99
Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (22140434) – $2.99

What are the top-rated Engine Parts that fit the 1970 GMC P15/P1500 Van?

Out of 175 reviews by customers, our 1970 GMC P15/P1500 Van Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1970 GMC P15/P1500 Van and their top-rated products:

Engine Gaskets and Seals
- VALVE COVER GASKET SET (5180848) – $15.99
- Engine Valve Stem Oil Seal Set (5183111) – $16.99
- Valve Cover Gasket Set for Chevrolet (22342677) – $37.99
Engine Kits
- VALVE COVER GASKET SET (5180848) – $15.99
- Engine Valve Stem Oil Seal Set (5183111) – $16.99
- Valve Cover Gasket Set for Chevrolet (22342677) – $37.99
Valve Cover and Cylinder Heads
- VALVE COVER GASKET SET (5180848) – $15.99
- Engine Valve Stem Oil Seal Set (5183111) – $16.99
- Valve Cover Gasket Set for Chevrolet (22342677) – $37.99

What types of Engine Parts do you sell for my 1970 GMC P15/P1500 Van?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1970 GMC P15/P1500 Van:

Can I get help with 1970 GMC P15/P1500 Van Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Engine Parts and more.

What is your return policy for GMC P15/P1500 Van Engine Parts?

Advance Auto Parts keeps returns simple. For new GMC P15/P1500 Van Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1970 GMC P15/P1500 Van Engine Parts

PowerBond – Premium OEM Replacement Harmonic Balancer; 169.8mm Diameter (Part No.PB1023N)

Imperial – Engine Oil Cooler (Part No.241046)

Sealed Power – Engine Connecting Rod Bearing (Part No.2020CP 30)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.6-2020CP 40)

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-55G)

Sealed Power – Valve Spring (Part No.VS-739R)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

KAI – Engine Oil Pan (Part No.SPIGMP27A)

Mr. Gasket – Rear Main Seal Gasket (Part No.1971)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.4124MA 20)

Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

Sealed Power – Engine Valve Lifter (Part No.HT-817)

Sealed Power – Engine Piston Ring Set (Part No.E-217K 30)

Melling – Stock Replacement Oil Pump Screen (Part No.62-S3)

ARP Auto Racing – For Use With Chevy Small Block Large Journal, 4 Bolt Main, Hex Head, Chrome Moly (Part No.134-5202)

Felpro – Engine Cylinder Head Gasket Set (Part No.HS 7733 SH-2)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S288)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Melling – Engine Oil Priming Tool (Part No.PT13)

Holley – GM Licensed Vintage Series SBC Valve Covers (Part No.241-106)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Felpro – Engine Gasket Set (Part No.FS 7733 SH-2)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2282)

Melling Select Performance – High Performance Replacement Bolt On Oil Pump Screen (Part No.12559)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

National – Shaft Repair Sleeve (Part No.99187)

Dorman – Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each) (Part No.555-007)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Felpro – VALVE COVER GASKET SET (Part No.VS 13173-1)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

Felpro – PermaTorque Engine Gasket Set (Part No.FS 8006 PT-4)

Felpro – Engine Gasket Set (Part No.260-1005)

Mr. Gasket – Rear Main Seal Gasket (Part No.1971)

Felpro – Engine Conversion Gasket Set (Part No.CS 8006-2)

Edelbrock – GASKETS (Part No.7548)

Victor Reinz – Engine Valve Cover Gasket Set (Part No.15-10542-01)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Sealed Power – Engine Valve Lifter (Part No.HT-817)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.362657.1)

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)

Dorman – Steel Cup Expansion Plug 2-7/64 In., Height 0.310 (sold by each) (Part No.555-080)

Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)

Dorman – Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each) (Part No.555-085)

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2282)

Energy Suspension – Motor Mount Set (Part No.3.1156G)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8006 PT-1)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.8006 PT)

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

Competition Cams – 16 Springs (Part No.26028-16)

Holley – Valve Covers – Muscle Series – Finned – SBC – Polished (Part No.241-137)

Holley – Valve Covers – Muscle Series – Finned – SBC – Satin Black Machined (Part No.241-135)

Holley – Valve Covers – Muscle Series – Finned – SBC – Factory Orange (Part No.241-136)

Holley – Valve Covers – Muscle Series – Finned – SBC – Natural (Part No.241-134)

Competition Cams – Magnum 1.6 Rocker, HE Pushrod, Guide Plate Kit Chevrolet 262-400 Small Block (Part No.RPG101)

Competition Cams – Magnum 1.52 Rocker, HE Pushrod, Guide Plate Kit Chevrolet 262-400 Small Block (Part No.RPG100)

Holley – GM Licensed Vintage Series SBC Valve Covers (Part No.241-106)

Holley – M/T Valve Covers – Vintage Style – Finned – SBC – Polished (Part No.241-82)

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

Holley – M/T Valve Covers – Vintage Style – Finned – SBC – Satin Black (Part No.241-83)

Holley – Valve Covers – Vintage Series – Finned – SBC – Polished (Part No.241-241)

Holley – Valve Covers – Vintage Series – Finned – SBC – Satin Black Machined (Part No.241-245)

ARP Auto Racing – For Use Wit 2003 And Earlier Gen Iii/Ls Series Smal Block, Hex Head, Chrome Moly (Part No.134-3609)

Holley – Valve Covers – Vintage Series – Finned – SBC – Satin Black Machined (Part No.241-242)

Holley – Valve Covers – Vintage Series – Finned – SBC – Natural (Part No.241-240)

Top Street Performance – Chevy Small Block Perimeter-Bolt V8 (265-400) Polished Fabricated Aluminum Short-Bolt Valve Covers with Breather Holes (Part No.JM8091-8P)

Mr. Gasket – Mls Head Gasket (Part No.3128G)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Cloyes Gear – Engine Timing Chain (Part No.C499)

National – Engine Harmonic Balancer Kit (Part No.5000)

Cloyes Gear – Engine Timing Set (Part No.C-3001K)

Cloyes Gear – Engine Timing Gear Set (Part No.2525S)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S390T)

ARP Auto Racing – For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly (Part No.200-1501)

INA US – ENG TIMING GEAR SET (Part No.ZC-2528S)