1970 Ford E-200 Econoline Differentials

Essential 1970 Ford E-200 Econoline Differentials

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

USA Standard Gear – Mini Spool For Ford 9" With 31 Spline Axles (Part No.59023)

Mini Spool For Ford 9" With 31 Spline Axles

from

$57.99
Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Bearing Race Driver (Part No.56011)

Bearing Race Driver

from

$215.99
Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.

Product Features:
  • Bearing race driver
  • Fits HM803110 race
  • All steel construction
See More

Yukon Gear – Extra HD 3.062" Nodular Iron Dropout For Ford 9" (Part No.32099)

Extra HD 3.062" Nodular Iron Dropout For Ford 9"

from

$615.99
Yukon Extra HD 3.062″ nodular Iron dropout for Ford 9″. Yukon nodular iron dropouts feature a 5/8″ cap bolt and forged caps for maximum strength. Rated up to 1200HP!

Product Features:
  • Fits Ford 9″
  • 3.062″ carrier race diameter
  • Nodular iron for added strength
See More

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential with Solid Spacer (Part No.37037)

Master Overhaul Kit for the Ford 9" LM603011 Differential with Solid Spacer

from

$236.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 9″ with LM603011 carrier races
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush and gasket.
See More

National – Multi Purpose Seal (Part No.7044NA)

Multi Purpose Seal

from

$15.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – O-Ring For 9" Ford (Part No.30028)

O-Ring For 9" Ford

from

$14.99
O-ring for 9″ Ford.Yukon Mighty seal.

Product Features:
  • Pinion support o-ring
  • Fits Ford 9″
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Yukon Gear – Standard Open And Tracloc Cross Pin Block For 9" Ford (Part No.33336)

Standard Open And Tracloc Cross Pin Block For 9" Ford

from

$30.99
Standard open and TracLoc cross pin block for 9″ Ford.

Product Features:
  • Cross pin block
  • Fits Ford 9″
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Pinion Install Kit For Ford 9" Differential (Part No.13042)

Pinion Install Kit For Ford 9" Differential

from

$175.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ without aftermarket Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pilot bearing , crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Set Up Bearing (Part No.56039)

Set Up Bearing

from

$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 60
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles

from

$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
  • Smooth design
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Street Design (Part No.26010)

Trac Loc For Ford 9" Wtih 31 Spline Axles - Street Design

from

$789.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Street design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

Preload Shim Kit For Chrysler 8.75" & Ford 9"

from

$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:
  • Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
See More

Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)

Pinion Support Bolt For 8" And 9" Ford

from

$6.99
Pinion support bolt for 8″ and 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 8″ and 9″
  • 3/8″ x 24 thread
  • 1.0″ long
See More

USA Standard Gear – Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design (Part No.39018)

Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design

from

$249.99
Product Features:
  • Spider gear kit
  • Fits Ford 9″ 31 spline open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
See More

Powertrax – Grip PRO Traction System (Part No.GT109031)

Grip PRO Traction System

from

$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Popular 1970 Ford E-200 Econoline Differentials Categories

1970 Ford E-200 Econoline Differentials

Maybe you’re in the middle of a full rebuild of that 1970 Ford E-200 Econoline. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 451 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1970 Ford E-200 Econoline running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1970 Ford E-200 Econoline. Yukon Gear, Driveworks, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1970 Ford E-200 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 319 reviews in this category, some of the top rated parts include Multi Purpose Seal with 5.0 stars and No-Slip Traction System with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1970 Ford E-200 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1970 Ford E-200 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1970 Ford E-200 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-200 Econoline the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1970 Ford E-200 Econoline, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

Top 1970 Ford E-200 Econoline Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1970 Ford E-200 Econoline. Popular Driveworks parts include:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
Oil Seal
from $4.29
(1)
Oil Seal
Differential Pinion Seals

FAQs for 1970 Ford E-200 Econoline Differentials

What are the most purchased Differentials for the 1970 Ford E-200 Econoline?

Out of 451 Differentials for the 1970 Ford E-200 Econoline, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Pinion Crush Sleeves
from $5.99
This product is not rated
Pinion Crush Sleeves
Differential Crush Sleeves
Dana 60, Dana 70 & Dana 80 Cover Bolt
from $5.99
This product is not rated
Dana 60, Dana 70 & Dana 80 Cover Bolt
Differential Cover Bolts

What are the top-rated 1970 Ford E-200 Econoline Differentials?

Top-rated Differentials for your 1970 Ford E-200 Econoline based on customer reviews/ratings are:
Multi Purpose Seal
from $15.79
(3)
Multi Purpose Seal
“good quality”
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
“Installed, no issues, works great.”
Differential Pinion Nut
from $6.49
(1)
Differential Pinion Nut
“If a pinion nut is ever removed from the pinion shaft, it is recommended NOT to reuse it. Replace it with a BRAND NEW nut, even if the old nut is rel”