1970 Chevrolet Kingswood Torque Converter and Related Products

Mr. Gasket Torque Converter to Flexplate Bolts are forged from high quality steel and heat-treated for extra strength, these Grade 8 fasteners are a must for all hi-performance applications. Black plated finish helps resist rust and corrosion. Kits are complete with lock washers, where needed. Kits are complete with lock washers, where needed. 3/8-24 x 5/8 inch bolts with nuts. 3 per set.

Product Features:

• Black Oxide Coating
• Grade 8 Steel
• Nuts Are Included
• Washer Are Included When Required
• Has 3 Bolts Per Set
• Has Lock Nuts

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:

• New Precision Pump Drive Tube
• Pressure Tested
• Fully Balanced
• Needle Thrust Bearing
• New Thrust Washer

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

• Meets or exceeds OE specifications

Converter: Th350 24-2800 Stall

Hays Race Tq Conv Pwrglide 36-4200 Stall

Hays Race Tq Convtr Th350 42-5000 Stall

Hays Race Tq Convtr Pglide 32-3600 Stall

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

• 2800-3200 RPM
• Small And Big Blocks
• Serious Performance
• Furnace Brazed
• Fully Balanced

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

• 3400-3800 RPM
• Small And Big Blocks
• Serious Performance
• Furnace Brazed
• Fully Balanced

Converter: Th350 28-3200 Stall

A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine
• New Turbine Hub
• New Springs/Rollers In Stator

Torque Converter

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:

• 2300-2500 RPM
• Small And Big Blocks
• Mild To Serious Performance
• Furnace Brazed
• Fully Balanced

Torque Converter

Torque Converter – Traveler Converter (SUV and Light Truck) for GM 1968 to 1981 TH350, TH375B APPLICATION: GM 1968 to 1981 TH350, TH375B (6) (will not fit TH-350C) Provides slightly higher stall speed than stock to improve pulling power at low speeds. New

Product Features:

• Ideal For Motor Homes
• Ideal For Towing Applications
• Precision Pump Drive Tube
• Heavy Duty Needle Bearings
• Furnace Brazed

HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty, and high performance converters are built by professionals with decades of experience.

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty, and high performance converters are built by professionals with decades of experience.

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty, and high performance converters are built by professionals with decades of experience.