Name: Installation Kit, Competition Plus Shifter
Brand: Hurst
SKU: 3733163
Price: 267.99 USD

from

$267.99

Installation kit for Hurst Competition Plus shifter. Includes all linkage pieces needed to complete the installation of your Hurst shifter.

Product Features:

Competition Plus Shifter Installation Kit
Includes Hardware
Durable
Sold as a Kit
Hurst Quality

from

$736.99

Do you like the tunability Holley’s modular carbs, but need to simply replace a Q-jet? The spread bore bolt pattern of the 0-80555C lets you do just that. It has vacuum secondaries and electric choke, so it is useable on a wide variety of vehicles and its single fuel inlet that is in the standard Q-jet location makes it easy to bolt on. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.

Product Features:

Gold Dichromate Finish For Corrosion Resistance w/Classic Look
Performance Replacement For Q-Jet Carbs
Factory Preset Electric Choke For Easy Startups
For All Weights/Gearing/Trans For Smooth Open Of Secondaries
Single Feed Fuel Inlet For Easy Installation
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$80.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$119.99

Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:

For Chevrolet small block 265 and 400
Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
Designed for use with OE specifications for fit and function
Made from high quality material

from

$41.99

Designed to fit 1968-1974 Chevrolet Chevelles, Spectre radiator support panels are a great looking way to secure your radiator. Manufactured from steel with a triple chrome plated finish, these durable panels are engineered to perform as well as they look. Chrome plated installation hardware is included to ensure easy installation.

Product Features:

All steel construction
Chrome plated installation hardware included
Designed to fit 1968-1974 Chevrolet Chevelles
Dimensions are 24 inches by 5-1/4 inches

from

$594.99

The Chevrolet HEI distributor is a favorite for muscle cars, street rods and even circle track racers. The integrated coil keeps under mount wiring clean, and for race cars, the idea of running one wire to the distributor keeps things simple. However, when it comes to performance, the stock HEI falls short. MSD answers the need for a strong, accurate and high performance HEI with our Pro-Billet HEI. The distributor is supplied with our digital HEI module and coil so there is plenty of spark energy combined with improved dwell and timing control. Tig welded on top of the distributor shaft is MSD’s adjustable centrifugal advance assembly. Three sets of springs and four stop bushings let you dial in up to 24 different timing curves to match your driving needs. Plus, there’s a vacuum advance for those concerned with economy. All of this is assembled around a precision and great looking CNC machined housing.

Product Features:

Complete performance HEI distributor upgrade for Chevy V8 engines
Supplied w/Brass Terminal Distributor Cap And Rotor
Full Spark Energy Output To 9000 Rpm
An 8.5 amp; single spark; inductive discharge ignition module
Includes MSD PN[83647] and MSD HEI Coil PN[8225]
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate

from

$14.99

Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for an optimum fit, this product’s hex heads include a decorative O-ring cap for a customizable appearance to suit your needs. Sold 4 per package, these studs are intended to fit standard height Chevy Center bolt valve covers.

Product Features:

4 bolts included in each package
Allen head includes decorative O-ring cap
Triple chrome-plated finish
Fits standard height Chevy Center bolt valve covers

from

$357.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$189.99

Spectre’s Polished Aluminum Differential Covers feature a finned design and 10 bolt assembly for optimum fit and function. Includes 10 SAE standard bolts for installation. You’ll need to supply your own bolts if your vehicle uses metric bolts. Manufactured using high quality materials this product was designed to perform as well as they look.

Product Features:

Polished aluminum
10 bolt cover with finned design
Gasket included
10 gold Iridite 3/8 inch -18 x 3/4 inch differential cover bolts included

from

$39.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$12.99

Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

Product Features:

Necessary if switching to electric fuel pump
Includes block off plate gasket
Includes chrome mounting bolts with washers
Triple chrome plated

from

$334.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$350.99

RngPnn

from

$18.99

Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

Product Features:

PerTronix D660701 Rotor Flame-Thrower Billet Distributor
Rotor for Flame-Thrower cast distributors

from

$266.99

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$12.99

Grade 8, single bolt. Black plated finish. The washers are designed to secure the Mr. Gasket cam button pn1180, pn1181, and pn1183 or can be used as stock replacements.

Product Features:

Specialty and drive train fastener
Special cam bolts
Black plated finish

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$59.99

HEAVY DUTY-Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. STREET/STRIP-Positive shifts for high performance street use or for competitive events. Hardest, quickest possible shift.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

from

$475.99

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Maximum Cooling for Street and Racing Engines
Internal Passages Are Balanced for Maximum Flow
Impeller is Larger than Others For Max Pressure
Impeller Vanes Dramatically Increase Flow Rates
Equal Distribution to Both Sides of Block
Only Flows in One-Direction for Optimum Efficiency

from

$23.99

Spectre’s Chevy short block timing cover kit is designed to protect engine components like timing gears and the timing chain. This kit features a triple chrome plated steel construction and includes a pre-installed seal, base gasket, (10) 12-point screws and a 12 point socket. This timing cover kit is engineered for optimum fit and function and it is designed to fit Chevy 265-400 short block engines.

Product Features:

Fits Small Black Chevrolet 265-400 Engines
Triple chrome plated
Steel construction
Includes pre-installed seal, gasket, (10) 12-point bolts and a 12 point socket
OEM fit & function
Spectre timing tab 4236 or 4237 is recommended

from

$117.99

Product Features:

Polished Finish
Raised Fins w/Black Mat Background
Detailed With Allen Hex Heads
2 Piece Look; 1 Piece Construction
Clears Most Roller Rockers
Clears Valvetrain Components
Heavy Gauge

from

$30.99

Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:

Edge molded rubber water outlet gasket is reusable
Requires no gasket sealer
Solid aluminum carrier for strength/rigidity

from

$25.99

The grade 8 bolts feature high hex head to prevent socket slippage. The thick parallel ground washer allows accurate uniform torque. Black finished, complete with split lock washer to prevent loosening.

Product Features:

These are have a zinc dichromate finish
Tall hex head bolt to prevent slippage
Extra thick parallel ground washer
Washers provides more accurate and uniform torque
Grade 8 alloy steel

from

$20.29

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Steel core gasket construction
Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
Not intended for use in emission controlled vehicles.

from

$30.99

This Spectre Alternator Bracket is an upper mount designed to fit 1969 and later Chevrolet Big Block engines with a long water pump. Featuring a triple chrome-plated finish and high quality steel construction, this part is an OEM replacement that mounts on the passenger’s side.

Product Features: