1970 Chevrolet El Camino Clutch Systems
More 1970 Chevrolet El Camino Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1970 Chevrolet El Camino, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1970 Chevrolet El Camino Clutch Systems
Lakewood – Trans Adapter-Chevrolet (Part No.77-150)
from
$689.99
Trans Adapter-Chevrolet
ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.100-2801)
from
$12.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.
Product Features:
See More
Product Features:
- 7/16″-20 Thread Size(s)
- 8740 Chromoly
- Black Oxide
- Ford 289-460
- Chevy 90 Degree V6 & 265-454 With 2PC Rear Seal
- Set of 6
- 1″ Underhead Length
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-111)
from
$35.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
LuK – Clutch Kit: 11 7/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-902)
from
$164.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
National – Multi Purpose Bearing (Part No.614018)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Release Bearing (Part No.S-614018)
Richmond Gear – Differential Cross Shaft (Part No.CSPGM82)
from
$25.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
ATP – FLYWHEEL SHIM (Part No.GS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.GS-9)
from
$23.99
FLYWHEEL SHIM
KAI – Clutch Bellcrank Felt (Part No.GMK4041951589P)
from
$7.99
New Goodmark Pair Of Clutch Bellcrank Felt Seals
Product Features:
See More
Product Features:
- Pair
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Clutch Pilot Bushing (sold by each) (Part No.690-034)
from
$7.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Clutch Pilot Bushing (sold by each) (Part No.690-035)
from
$14.49
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Clutch Bellcrank Kit (Part No.GMK4041951587S)
from
$10.99
New Goodmark Clutch Bellcrank Pivot Kit
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Flywheel Ring Gear (Part No.ZA-512)
from
$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
KAI – Clutch Push Rod Lever (Part No.GMK4012951692S)
from
$28.49
New Goodmark Clutch Lower Pushrood And Swivel, For Vehicles Equipped With Big Block V8, 4 Cylinder And Inline 6 Cylinder Engines
Product Features:
See More
Product Features:
- For Vehicles Equipped With Big Block V8 4 Cylinder And Inline 6 Cylinder Engines
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ATP – AT CLUTCH PLATE (Part No.SC-26)
from
$9.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.JC-57)
from
$12.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.SC-30)
from
$6.99
AT CLUTCH PLATE
ARP Auto Racing – For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (Part No.230-2202)
from
$34.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 200,000 PSI
- 1″ Underhead Length
- 3/8″-16 Thread Size
LuK – Clutch Release Fork (Part No.LF9801)
ATP – CLUTCH FORK (Part No.ZA-100)
from
$23.99
CLUTCH FORK
Dorman – Help – Clutch Fork, Clutch-In (Part No.14550)
from
$70.99
This clutch fork is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch fork is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this fork is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Lakewood – Replacement Clutch Fork-GM (Part No.15500)
from
$80.29
Replacement Clutch Fork-GM
KAI – Clutch Pivot Ball (Part No.GMK4046951694)
from
$29.99
New Goodmark Clutch Pivot Stud, Mounted On Vehicle Frame
Product Features:
See More
Product Features:
- Mounted On Vehicle Frame
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Clutch Pivot Ball (Part No.GMK4010951651)
from
$29.99
New Goodmark Clutch Bellcrank Pivot Ball Stud, Mounted On Frame
Product Features:
See More
Product Features:
- Mounted On Frame
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Ball Stud Thread Size 13/16-16, Length 1.50 In. (Part No.14556)
from
$20.99
This clutch pivot ball is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pivot ball is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this pivot ball is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Clutch Pivot Ball (Part No.GMK4010951652)
from
$24.99
New Goodmark Clutch Bellcrank Pivot Ball Stud, Mounted On Engine
Product Features:
See More
Product Features:
- Mounted On Engine
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1970 Chevrolet El Camino Clutch Systems Categories
1970 Chevrolet El Camino Clutch Systems
You count on your 1970 Chevrolet El Camino to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 54 Clutch Systems ranging in price from $3.99 to $907.99, you’re sure to find everything you need for your 1970 Chevrolet El Camino.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 10 different brands like ATP, Dorman, and National. 1970 Chevrolet El Camino Clutch Systems start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 318 extensive product reviews on 1970 Chevrolet El Camino Clutch Systems. Some of the top-rated Clutch Systems products we carry are Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In with 3.0 stars and Automatic Transmission Flex Plate with 5.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1970 Chevrolet El Camino below to get started!
Top-Rated Clutch Systems Brands For Your 1970 Chevrolet El Camino
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1970 Chevrolet El Camino running right for years to come. In our inventory you’ll find brands like ATP, Dorman, National, and even more.
Popular National Clutch Systems
You’ll find popular National brand products across Clutch Pilot Bushings and Clutch Release Bearings. All are waiting to get your 1970 Chevrolet El Camino back on the road. Some of the top-rated National products in these categories are:
Top-Rated ATP Clutch Systems
If ATP are what you’re looking for, our inventory holds plenty. We stock ATP brand Clutch Systems for your 1970 Chevrolet El Camino, and some of our most reviewed ATP parts include:
FAQs for 1970 Chevrolet El Camino Clutch Systems
What are the most purchased Clutch Systems for the 1970 Chevrolet El Camino?
Out of 54 Clutch Systems for the 1970 Chevrolet El Camino, the most popular in our inventory are:
from
$138.99
This product is not rated
Clutch Kit: 11" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline
Clutch Sets
What are the top-rated 1970 Chevrolet El Camino Clutch Systems?
Top-rated Clutch Systems for your 1970 Chevrolet El Camino based on customer reviews/ratings are:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
“Right part”
from
$63.99
(1)
Automatic Transmission Flex Plate
“This flywheel is drilled in all 6 location’s but drilled the same. 3 are suppose to be drilled to fit large pattern and 3 are suppose to be drilled fo”
