1969 Triumph TR6 Engine Cooling Parts
More 1969 Triumph TR6 Engine Cooling Parts
Find your specific 1969 Triumph TR6 original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1969 Triumph TR6 Engine Cooling Parts
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Felpro – Engine Coolant Outlet Gasket (Part No.25538)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13359)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad UltraStats – Thermostat: 180 Degrees (Part No.5200-180)
from
$14.29
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13356)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Wahler – Thermostat (Part No.G400023369WAH)
from
$23.81
Wahler is a provider of premium quality thermostats and thermo-switches in OE quality. The varying applications and divergent technologies of the internal combustion engine call for thermostats featuring different operating characteristics and modes of operation. Therefore Wahler provides thermostats with a highly accurate coolant control.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
NTC – Thermostat (Part No.G400018259NTC)
from
$9.21
NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13358)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
URO Parts – Water Temperature Sender (Part No.DAC2583)
from
$7.49
URO Parts has been a leading brand of replacement auto parts for European vehicles for more than thirty years. Affordable yet dedicated to quality, URO Parts controls its production process in strict accordance with ISO/TS 16949 QMS specifications and offers a wide variety of components used to restore or repair engine, electrical, drive train, braking, steering, suspension, climate control, cooling, exhaust, and fuel systems in classic to late-model German, British, and Scandinavian vehicles. Looking for parts that are even higher quality than original equipment? URO Parts engineers analyze common failures and identify weaknesses in original equipment parts when creating URO Premium components, which are superior to OE in performance and reliability thanks to improved materials and more robust designs. Thanks to high-quality, competitively-priced URO Parts and bulletproof URO Premium replacement components, owning a prestigious European vehicle is no longer an expensive luxury reserved for the elite and wealthy.
Product Features:
See More
Product Features:
- Guaranteed Fitment
- High Quality Materials
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1254)
from
$21.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
APA/URO Parts – Water Temperature Sender (Part No.P403650869APA)
from
$10.52
A.P.A.URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Referred to as ‘temp transducer’ in factory film located in/on thermostat housing – has a single male spade terminal
See More
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$47.19
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 7 PSI (Part No.10328)
from
$7.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 13 PSI (Part No.10329)
from
$10.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 7 PSI (Part No.10228)
from
$6.29
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Popular 1969 Triumph TR6 Engine Cooling Parts Categories
1969 Triumph TR6 Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 1969 Triumph TR6. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 13 different Engine Cooling Parts in our inventory ranging from $2.99 to $94.99. That means you can find the exact parts or products you need to keep that 1969 Triumph TR6 running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Triumph TR6. Carquest Premium, Motorad UltraStats, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 1969 Triumph TR6, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1969 Triumph TR6 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 1969 Triumph TR6 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Triumph TR6 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your TR6 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
Popular NTC Engine Cooling Parts
We carry NTC parts in our stock across Thermostats categories, plus more. For a 1969 Triumph TR6, our most popular NTC Engine Cooling Parts include:
Top 1969 Triumph TR6 Engine Cooling Parts from Carquest Premium
Carquest Premium products are another trusted brand when it comes to Engine Cooling Parts for your 1969 Triumph TR6. Popular Carquest Premium parts include:
FAQs for 1969 Triumph TR6 Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 1969 Triumph TR6?
Out of 13 Engine Cooling Parts for the 1969 Triumph TR6, the most popular in our inventory are:
