1969 Plymouth Fury Drivetrains
More 1969 Plymouth Fury Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1969 Plymouth Fury, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1969 Plymouth Fury Drivetrains
Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)
from
$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.
Product Features:
See More
Product Features:
- U-Joint strap bolt
- Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
- 7290 u-joint size
Yukon Gear – Dana 44 And Chrysler 9.25" Traclloc Clutch Kit Replacement (Part No.16153)
from
$139.99
Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Dana Spicer 44 and Chrysler 9.25″ Trac Loc positraction
Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#42) Differential (Part No.13006)
from
$359.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’42’ case
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)
from
$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Powr Lok button kit
- Fits Dana Spicer 30, 44 and Chrysler 8.75″
Yukon Gear – Pinion Seal For Chrysler 8.75" 42 Housing (Part No.30171)
from
$53.99
Pinion seal for Chrysler 8.75″ 42 housing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits Chrysler 8.75″ with ’42’ case housing
Yukon Gear – Carrier Installation Kit For Chrysler 9.25" Rear Differential (Part No.57001)
from
$173.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Chrysler 9.25″ rear differential. This kit contains carrier bearings and races.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- Includes carrier bearings and races
Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)
from
$14.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Cross Pin Shaft For Chrysler 7.25" (Part No.33307)
from
$49.99
Cross pin shaft for Chrysler 7.25″.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Chrysler 7.25″
Yukon Gear – Positraction Spiders For Chrysler9.25" Dura Grip Posi, 31 Spline, No Clutches Included (Part No.16180)
from
$389.99
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Chrysler 9.25″
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
- Fits Yukon Dura Grip
Yukon Gear – Positraction Clutch Guide (Part No.33352)
from
$8.99
Positraction clutch guide.
Product Features:
See More
Product Features:
- Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
- Compatible with Dura Grip positractions only
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
National – Shaft Repair Sleeve (Part No.99212)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Richmond Gear – Differential Gear Install Kit (Part No.83-1041-B)
from
$42.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)
from
$12.99
9.25″ pinion gear thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Chrysler 9.25″ rear
Yukon Gear – Bearing Race Driver (Part No.56021)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M804010 race
- All steel construction
Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10047)
from
$142.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing with inner and outer seals (one side) for 8.75″ Chrysler. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ rear
- Includes axle bearing and inner and outer axle seals
- Services one side
Neapco – Universal Joint (Part No.2-3010)
USA Standard Gear – Ring & Pinion Gear Set For Chrysler 875" ,42 Housing In A 355 Ratio, 10 Spline Pinion (Part No.36300)
from
$319.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ “42” case housing
- 8.75″ ring gear diameter
- 10 spline pinion
- 12 ring gear bolts
- 3.55 ratio
Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21042)
from
$252.99
Yukon 1541H alloy rear axle for Chrysler 8.75″ measuring 30″ with 30 splines and 5×4.5 bolt pattern. for use with C & E-Body only. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 30 spline
- 30″ long
- 5 x 4.5″ bolt pattern
USA Standard Gear – Bearing Kit For Dana 60 Rear (Part No.58042)
from
$229.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 7260 U/Joint Size (Part No.41003)
from
$279.99
Yukon yoke for Chrysler 7.25″ and 8.25″ with a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 7.25″ and 8.25″
- 27 spline
- 7260 u-joint size
- Inside snap ring design
- 2.125″ snap ring span
- 1.078″ cap diameter
- Strap style
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Pinion Nut (Part No.33142)
from
$10.99
Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.
Product Features:
See More
Product Features:
- Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
- 7/8″ x 14 thread
Motive Gear – Differential Crush Sleeve (Part No.3507575)
Felpro – Differential Carrier Gasket (Part No.RDS 6583)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Popular 1969 Plymouth Fury Drivetrains Categories
1969 Plymouth Fury Drivetrains
You count on your 1969 Plymouth Fury to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 425 Drivetrains ranging in price from $2.49 to $1,487.99, you’re sure to find everything you need for your 1969 Plymouth Fury.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Valvoline, Driveworks, and National. 1969 Plymouth Fury Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 11,487 extensive product reviews on 1969 Plymouth Fury Drivetrains. Some of the top-rated Drivetrains products we carry are DIFFERENTIAL GASKET with 4.4 stars and Multi Purpose Seal with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1969 Plymouth Fury below to get started!
Top-Rated Drivetrains Brands For Your 1969 Plymouth Fury
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1969 Plymouth Fury running right for years to come. In our inventory you’ll find brands like Valvoline, Driveworks, National, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1969 Plymouth Fury back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1969 Plymouth Fury, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1969 Plymouth Fury Drivetrains
What are the most purchased Drivetrains for the 1969 Plymouth Fury?
Out of 425 Drivetrains for the 1969 Plymouth Fury, the most popular in our inventory are:
What are the top-rated 1969 Plymouth Fury Drivetrains?
Top-rated Drivetrains for your 1969 Plymouth Fury based on customer reviews/ratings are:
from
$6.79
(21)
DIFFERENTIAL GASKET
“I always use Fel-Pro gaskets they’re the best, but this gasket to replace the differential gasket on my son’s Jeep when I did a fluid change work and ”
from
$16.49
(19)
Axle Repair Bearing
“Up and running again with no more axle seal leaks in my Grand Marquis with 318k miles on it!”
