1969 Ford Torino Differentials

Essential 1969 Ford Torino Differentials

USA Standard Gear – 9" Ford Pinion Kit, Koyo Bearings (Part No.60002)

9" Ford Pinion Kit, Koyo Bearings

from

$124.99
9″ Ford pinion kit, Koyo bearings.

Product Features:
  • Fits Ford 9″
  • Uses Koyo bearings and races
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Powertrax – Lock Right Locker (Part No.1810-LR)

Lock Right Locker

from

$339.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-530)

    Differential Pinion Yoke Assembly

    from

    $135.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Driveworks – Taper Bearing Cone (Part No.S-M-86649)

    Taper Bearing Cone

    from

    $8.79
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F9-350)

    Differential Ring and Pinion

    from

    $193.99


    Product Features:
    • FRD 10BL 9.0 R/P 3.50 MG
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 13270)

    Differential Carrier Gasket

    from

    $4.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Dorman – Help – Pinion Crush Sleeves (Part No.81056)

    Pinion Crush Sleeves

    from

    $5.99
    This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
    • Required replacement – when servicing the differential
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Nodular Differential Housing (Part No.26306)

    Nodular Differential Housing

    from

    $533.99


    Product Features:
    • NODULAR HOUSING 9″ FORD 3.062 BORE STRANGE # N1905
    See More

    Powertrax – Grip LS Traction System (Part No.LS108028)

    Grip LS Traction System

    from

    $451.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Motive Gear – Differential Mini Spool (Part No.MS9-31)

    Differential Mini Spool

    from

    $31.99


    Product Features:
    • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 55074)

    Differential Carrier Gasket

    from

    $8.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Long (Part No.17021)

    9" Ford Spartan Locker Cross Pin, Long

    from

    $49.99
    Product Features:
    • USA Standard Gear heavy-duty cross pin shaft
    • Fits Ford 9″
    • Works with Spartan Locker or standard open spider gears
    • Long shaft
    See More

    Motive Gear – Differential Pinion Nut (Part No.379570S)

    Differential Pinion Nut

    from

    $6.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Pro-King – Differential Pinion Shim Kit (Part No.763A203)

    Differential Pinion Shim Kit

    from

    $11.79
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Richmond Gear – Differential Spool (Part No.81-0928-1)

    Differential Spool

    from

    $259.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Motive Gear – Differential Pinion Shaft Support Block (Part No.D3SZ4211A)

    Differential Pinion Shaft Support Block

    from

    $47.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
    See More

    Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

    3 Qt - Penzoil 80W90 Conventional Gear Oil

    from

    $44.99
    3 Qt. Penzoil 80W90 conventional gear Oil.

    Product Features:
    • Includes three quarts of conventional oil
    See More

    National – Bearings (Part No.R-1535-TAV)

    Bearings

    from

    $41.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • High radial load capacity makes them suitable for high speed applications
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    ARP Auto Racing – For Use With Ford 9" Using 5/8"Socket, 0.94"L Under Head, 7/16"-20, 12Point Head (Part No.250-3002)

    For Use With Ford 9" Using 5/8"Socket, 0.94"L Under Head, 7/16"-20, 12Point Head

    from

    $34.99
    The tremendous shock loads generated at launch by most any drag racing vehicle equipped with today sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. they are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

    Product Features:
    • Forged From Premium Grade 8740 Chrome Moly Steel
    • Heat Treated
    • Nominally Rated At 200,000 PSI Tensile Strength
    • Specially Hardened, Precision Ground Washers
    • 0.95″ Underhead Length
    • 200,000 PSI
    • Sold As A Set
    See More

    Richmond Gear – Differential Cross Shaft (Part No.CSPF9)

    Differential Cross Shaft

    from

    $26.49
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    National – Multi Purpose Seal (Part No.7044NA)

    Multi Purpose Seal

    from

    $15.79
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Powertrax – Grip LOK Traction System (Part No.LK109028)

    Grip LOK Traction System

    from

    $668.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Richmond Gear – Differential Bearing Kit (Part No.83-1011-1)

    Differential Bearing Kit

    from

    $153.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $22.79


    Product Features:
    • FORD 9″ SOLID SPACER KIT
    See More

    Motive Gear – Differential Gear Install Kit (Part No.F9IK)

    Differential Gear Install Kit

    from

    $33.99
    Product Features:
    • MINI INSTALL KIT FORD 9″
    See More

    Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

    Tapered Cone/Cup Wheel Bearing Set

    from

    $13.99
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

    Tapered Cup Wheel Bearing Assembly

    from

    $8.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    1969 Ford Torino Differentials

    Maybe you’re in the middle of a full rebuild of that 1969 Ford Torino. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 172 different Differentials in our inventory ranging from $1.99 to $679.99. That means you can find the exact parts or products you need to keep that 1969 Ford Torino running smoothly.

    Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Ford Torino. Driveworks, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1969 Ford Torino, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 4,032 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Multi Purpose Seal with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1969 Ford Torino rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1969 Ford Torino Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Ford Torino demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Torino the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1969 Ford Torino, our most popular Felpro Differentials include:
    Differential Carrier Gasket
    from $8.49
    (9)
    Differential Carrier Gasket
    Automatic Transmission Differential Carrier Gaskets

    Top 1969 Ford Torino Differentials from Driveworks

    Driveworks products are another trusted brand when it comes to Differentials for your 1969 Ford Torino. Popular Driveworks parts include:
    Taper Bearing Set
    from $10.29
    (38)
    Taper Bearing Set
    Differential Bearings
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Differential Bearings

    FAQs for 1969 Ford Torino Differentials

    What are the most purchased Differentials for the 1969 Ford Torino?

    Out of 172 Differentials for the 1969 Ford Torino, the most popular in our inventory are:
    Bearings
    from $16.99
    (25)
    Bearings
    Differential Bearings
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Bearings
    from $15.99
    (9)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1969 Ford Torino Differentials?

    Top-rated Differentials for your 1969 Ford Torino based on customer reviews/ratings are:
    Bearings
    from $10.49
    (4)
    Bearings
    “Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
    Multi Purpose Seal
    from $15.79
    (3)
    Multi Purpose Seal
    “good quality”
    Bearings
    from $18.79
    (3)
    Bearings
    “as advertised”