1969 Ford Falcon Performance Distributors

Essential 1969 Ford Falcon Performance Distributors

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2502)

Chrome Distributor Hold-Down Clamp

from

$13.29
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed. Fits 1962-2001 Small Block Ford V8s, including both Windsor and Cleveland as well as Ford 385 series 429/460 big blocks including Boss models.

Product Features:
  • Eliminates bolt in favor of stud mount design
  • Chrome plated
  • Ideal For Ignition Distributor
See More

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

D4061 Flame-Thrower HEI Distributor Rotor Red

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.9860)

Chrome Distributor Hold-Down Clamp

from

$13.29
Chrome plated steel. Includes hold-down bolt or stud. Holds the distributor in place for accurate timing. Serrated bottom prevents the distributor from turning.

Product Features:
  • Rolled Edges For Strength
  • Ideal For Magnetos
  • Ideal For Ignition Distributor
See More

MSD Ignition – Distributor Gear; Ford; 302; Bronze (Part No.8583)

Distributor Gear; Ford; 302; Bronze

from

$83.39
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Interstitial carbide improves wear resistance/running properties
  • Melonite QPQ coated reduces friction and initial wear
  • Proprietary formulated ductile iron.
  • Micro Polished Surface For Smooth Contact
  • Increased outer hardened layer thickness (RC 55-60)
See More

PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)

D700700 Advance Spring Kit Flame-Thrower Billet Distributor

from

$20.99
Performance mechanical advance springs.

Product Features:
  • PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
  • Performance mechanical advance springs.
See More

Competition Cams – .530" I.D. Composite Distributor Gear for Ford 302-351W (Part No.35100)

.530" I.D. Composite Distributor Gear for Ford 302-351W

from

$143.99
COMP Cams Composite Distributor Gears have undergone stringent testing in various applications with positive results. These super tough gears show great promise in solving the wear issues associated with bronze gears in racing applications. They are available in several shaft diameters for popular street and race applications.

Product Features:
  • Fits .530″ Shaft Diameter, Small Block Ford
  • Manufactured from a super-strong composite material
  • 300% increased durability over bronze distributor gears when used with steel camshafts
  • Tested and available in several shaft diameters for popular street and race applications
See More

PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)

D4062 Flame-Thrower HEI Distributor Rotor Blue

from

$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4062 Flame-Thrower HEI Distributor Rotor Blue
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)

D660701 Rotor Flame-Thrower Billet Distributor

from

$18.99
Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact

Product Features:
  • PerTronix D660701 Rotor Flame-Thrower Billet Distributor
  • Rotor for Flame-Thrower cast distributors
See More

PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)

D4260 Flame-Thrower Distributor Rotor HEI/EST Black

from

$10.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4260 Flame-Thrower Distributor Rotor HEI/EST Black
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

MSD Ignition – Distributor; Ford 289/302; Vacuum Advance (Part No.8479)

Distributor; Ford 289/302; Vacuum Advance

from

$494.99
The street pro-billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire rpm range of your engine and is completely maintenance-free.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • CARB E.O. Approved
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance weight pins are staked and tig welded to the plate
See More

MSD Ignition – Distributor; Ford 289/302; Ready-to-Run; with Steel Gear (Part No.83521)

Distributor; Ford 289/302; Ready-to-Run; with Steel Gear

from

$664.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.

Product Features:
  • Equipped w/Steel Gear
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Supplied w/small dia. cap w/HEI style terminals; race and rotor
  • Will accept PN[8441] Cap-A-Dapt
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
See More

Proform – Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines (Part No.66969R)

Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines

from

$228.99
Fits Ford 289 – 302 (5.0). Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.

Product Features:
  • Street/Strip Version
  • Built-In Coil with Magnetic Trigger
  • Features Red Cap
  • Fits Ford 289-302 5.0 Engines
  • Comes with An Iron Gear and with Not Work with Factory Roller Cams
See More

MSD Ignition – Distributor; Ford 302; Pro-Billet; Small Cap (Part No.8579)

Distributor; Ford 302; Pro-Billet; Small Cap

from

$399.99
MSD engineers fit all of their high performance distributor experience into a special compact housing designed to be less obtrusive for Ford engines. The diameter of the special cap and housing are 5/8 inch smaller than stock Ford distributors providing extra room in front of the engine. The new MSD cap features spark plug style terminals and is firmly screwed down to the housing. The distributor relies on MSD’s race proven magnetic pick-up and precision reluctor to deliver accurate trigger signals to the MSD ignition throughout high rpm. The reluctor assembly is turned by a hardened steel shaft which rides in a sealed ball bearing for high rpm stability and endurance. Mounted to the top of this shaft is a fully adjustable mechanical advance assembly. The rate at which the chromoly assembly advances the timing is easily controlled by changing the supplied advance springs and stop bushing for total advance.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • Must Be Used w/An MSD Ignition Control
  • Supplied w/small dia. cap w/HEI style terminals; race and rotor
  • Will accept PN[8441] Cap-A-Dapt
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
See More

1969 Ford Falcon Performance Distributors

Maybe you’re in the middle of a full rebuild of that 1969 Ford Falcon. Maybe you just need a couple of Performance Distributors. Either way, Advance Auto Parts has 11 different Performance Distributors in our inventory ranging from $10.99 to $664.99. That means you can find the exact parts or products you need to keep that 1969 Ford Falcon running smoothly.

Performance Distributors are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Ford Falcon. Proform, PerTronix, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Distributors for your 1969 Ford Falcon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Distributors to keep your 1969 Ford Falcon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Distributors Brands To Make Your 1969 Ford Falcon Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Ford Falcon demands trusted brand parts and products to keep it running. Many trusted brands of Performance Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Falcon the best it can be. Be sure to browse some of our top Performance Distributors brands and parts.

Popular MSD Ignition Performance Distributors

We carry MSD Ignition parts in our stock across Performance Distributor Components categories, plus more. For a 1969 Ford Falcon, our most popular MSD Ignition Performance Distributors include:
Distributor Gear; Ford; 302; Bronze
from $83.39
(1)
Distributor Gear; Ford; 302; Bronze
Performance Distributor Components

Top 1969 Ford Falcon Performance Distributors from Proform

Proform products are another trusted brand when it comes to Performance Distributors for your 1969 Ford Falcon. Popular Proform parts include:
Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines
from $228.99
(4)
Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines
Performance Distributors

FAQs for 1969 Ford Falcon Performance Distributors

What are the most purchased Performance Distributors for the 1969 Ford Falcon?

Out of 11 Performance Distributors for the 1969 Ford Falcon, the most popular in our inventory are:
D700700 Advance Spring Kit Flame-Thrower Billet Distributor
from $20.99
This product is not rated
D700700 Advance Spring Kit Flame-Thrower Billet Distributor
Performance Distributor Components
Chrome Distributor Hold-Down Clamp
from $13.29
This product is not rated
Chrome Distributor Hold-Down Clamp
Performance Distributor Components
Chrome Distributor Hold-Down Clamp
from $13.29
This product is not rated
Chrome Distributor Hold-Down Clamp
Performance Distributor Components