1969 Ford F-250 Pickup Drive Shafts and Axles

Name: Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs - Non-Engraved Caps
Brand: Yukon Gear
SKU: 29079
Price: 429.99 USD

Keep Your 1969 Ford F-250 Pickup in Top Shape with Quality Drive Shafts and Axles

Whether you’re repairing or upgrading your Drive Shafts and Axle, using high-quality parts is key to keeping your 1969 Ford F-250 Pickup looking sharp and performing at its best. At Advance Auto Parts we carry a wide selection of dependable options, including Axle Shaft Bearings, Axle Shaft Universal Joints, and Axle Shaft Seals. Whether you’re replacing a damaged part or enhancing your truck’s style and protection, you’ll find exactly what you need to get the job done right.

Top-Rated Drive Shafts and Axles from Trusted Brands

Looking for a reliable Drive Shafts and Axle? We’ve got you covered with options from brands you know and trust like Spicer, National, and DriveWorks. For example, Spicer Drive Shafts and Axles start at just $31.99 with an average 4.6 star rating. National and DriveWorks offer similar pricing and quality, backed by strong customer feedback. With over 776 reviews and a solid 4 star average, you can shop with confidence knowing other Ford F-250 Pickup owners approve.

Competitive Prices and Extensive Inventory

The average price for a 1969 Ford F-250 Pickup Drive Shafts and Axle at Advance Auto Parts is around $102.08, with a range that starts at $4.99 and goes up to $689.99. With 30 options in stock from 6 trusted brands, finding the right fit is easy. Popular picks like Universal Joint, Greaseable 1310 Series OSR, Universal Joint, Greaseable 1350 Series, and Center Support Bearing Motor Mount: Center, 1 Piece start at just $21.49 and offer a great balance of form and function.

Explore Related Parts

While you’re upgrading or replacing your Drive Shafts and Axle, don’t forget to check out other key components like 4WD Components and Universal Joints. At Advance Auto Parts, we’re here to help you keep your 1969 Ford F-250 Pickup in peak condition, inside and out.

Looking for the perfect Drive Shafts and Axle for your 1969 Ford F-250 Pickup? You’re in the right place. Below, you’ll find links to various types of Drive Shafts and Axles that fit your vehicle. At Advance Auto Parts, we offer only the highest quality OEM and aftermarket Drive Shafts and Axles, ensuring durability and a precise fit for your Ford F-250 Pickup. Whether you’re driving a 1969 model or another popular model year like 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997, we’ve got you covered. Purchasing Drive Shafts and Axles from Advance Auto Parts is a smart choice, giving you access to trusted brands and parts built to perform. Below, you’ll find links to various types of Drive Shafts and Axles that fit your vehicle.

Essential 1969 Ford F-250 Pickup Drive Shafts and Axles

from

$429.99

Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..

Product Features:

Drive flange kit
Fits Dana Spicer 44 with 19 spline outer axles
Includes two drive flanges, two caps and all necessary hardware

from

$9.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$79.99

Full floating axle seal for 10.25″ Ford.Yukon Mighty seal.

Product Features:

Rear axle seal
Fits Ford 10.25″

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$39.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$73.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$58.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$4.99

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:

Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
Intalls next to side gear

from

$40.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 4 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.48 INCH / 63 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
NOT PICTURED: TWO DUST SHIELDS

from

$21.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

from

$46.99

Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.

Product Features:

Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.

from

$44.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$121.99

Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for ’59 to ’75 Dana 44 and Ford 3/4 ton front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:

Fits 1959-1975 Ford 3/4 ton
Includes axle bearings, races and seal
Services one side

from

$92.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:

Fits Ford and Dodge applications
Includes axle bearing and seal
Torrington Brand
Services one side
2.985″ O.D.
1.700″ I.D.

from

$27.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.49

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$182.99

Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits Dana Spicer 25, 27, 30, 4 and 50

from

$146.99

Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 30 and 44
26 spline
1330 u-joint size
Outside snap ring design
3.625″ snap ring span
1.062″ cap diameter
Strap style

from

$159.99

Yukon flange yoke for Ford 9.75″. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 9.75″
31 spline

from

$414.99

Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$25.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

RIGHT TYPE — Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS — Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$31.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.69

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$13.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$209.99

Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:

Extra Large clamshell
Fits carrier bearing puller

Popular 1969 Ford F-250 Pickup Drive Shafts and Axles Categories

Axle Shaft Universal Joints

Drive Shaft Center Supports

Center Support Bearings

Axle Shaft Bearing Assemblies

Bearing Pullers

Drive Shaft Bearings

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Axle Shaft Bearings

Drive Shaft Seals

Axle Shaft Snap Rings

Axle Pinion Repair Sleeves

Drive Shaft Flanges

Best-Selling 1969 Ford F-250 Pickup Axle Shaft Universal Joints

Upgrade your F-250 Pickup with one of our 7 best-selling Axle Shaft Universal Joints, earning an average 4.33 stars rating across 29 reviews.

show more show less

from

$31.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$38.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$44.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$45.99

from

$47.99

Product Features:

Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.

from

$49.99

Top-Quality Axle Shaft Seals for 1969 Ford F-250 Pickups

Choose a high-quality OEM or aftermarket Axle Shaft Seal for Ford F-250 Pickups and enjoy top-notch performance from $7.99.

show more show less

from

$9.99

Yukon Gear & Install Kit package for Jeep TJ with Dana 30 front and Dana 44 rear, 4.88 ratio. This is a complete package that includes front & rear ring & pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front & rear differential in one easy part number.

Product Features:

Fits Jeep TJ with Dana Spicer 30 front and Dana Spicer 44 rear
4.88 ratio
Includes front and rear ring & pinion sets and master overhaul kits

from

$7.99

Front wheel seal.Yukon Mighty seal.

Product Features:

Front wheel bearing seal
Fits 1955-1993 GM half ton front

Top Picks for 1969 Ford F-250 Pickup Center Support Bearings

Invest in one of our 2 durable Center Support Bearings for your 1969 Ford, knowing you’re getting trusted brands and expert craftsmanship.

show more show less

from

$40.99

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 4 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.48 INCH / 63 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
NOT PICTURED: TWO DUST SHIELDS

from

$21.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

Top-Rated Drive Shaft Center Supports for 1969 Ford F-250 Pickups

Make a smart move for your 1969 Ford F-250 Pickup with products all priced from $44.99 to $73.99.

show more show less

from

$73.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$44.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$55.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Top-Rated Drive Shafts and Axle Brands For Your 1969 Ford F-250 Pickup

When it comes to finding the perfect Drive Shafts and Axle for your 1969 Ford F-250 Pickup, Advance Auto Parts has you covered with a wide selection of high-quality OEM and aftermarket options from 6 trusted brands. We carry the most popular Drive Shafts and Axle brands including Spicer, National, and DriveWorks, and more, all known for their exceptional customer ratings (average brand rating of 4.6 stars) and competitive prices, as low as $9.99. Purchasing a Drive Shafts and Axle from us here at Advance Auto Parts is a smart move for both you and your 1969 Ford F-250 Pickup, providing peace of mind with parts that meet or exceed OEM standards.

Popular Spicer 1969 Ford F-250 Pickup Drive Shafts and Axles

If you’re looking for a top-quality Drive Shafts and Axle for your 1969 Ford F-250 Pickup, Advance Auto Parts has exactly what you need with our selection of Spicer Drive Shafts and Axles. We have 3 Spicer Drive Shafts and Axles in stock for this fitment, all known for their durability and precision fit. With prices starting at just $31.99 and an average cost of $38.66, you’ll find the perfect Drive Shafts and Axle for your needs and budget. Spicer Drive Shafts and Axles for the 1969 Ford F-250 Pickup come highly rated, with over 19 customer reviews and an impressive average rating of 4.6 stars. Choosing a Spicer Drive Shafts and Axle from Advance Auto Parts is a smart move to ensure quality and value for your vehicle.

from $38.99

(2)

Universal Joint

“I use this on a 4×4 off-road. It’s always a tough trade-off between the greaseable and non-greasable u-joints. The non-greaseable is stronger. The”

from $31.99

(12)

Universal Joint, Greaseable 1310 Series OSR

“No problems with Installation and appears to be quality part! Great for my old School Street Car!”

from $44.99

(5)

Universal Joint, Greaseable 1350 Series

“Excellent Dana u joint.”

Top-Quality National 1969 Ford F-250 Pickup Drive Shafts and Axles

For those in search of a high-quality Drive Shafts and Axle for their 1969 Ford F-250 Pickup, Advance Auto Parts offers a great selection of National Drive Shafts and Axles. With 2 National Drive Shafts and Axles in stock, you can trust you’re getting top-tier parts designed for durability and a perfect fit. Prices for these Drive Shafts and Axles start at just $9.99, with an average price of $41.99, giving you a range of options to suit your budget. Backed by over 25 customer ratings and an average rating of 4.3 stars, National Drive Shafts and Axles provide both reliability and excellent performance. Choosing a National Drive Shafts and Axle from Advance Auto Parts is a smart investment in your vehicle’s performance and longevity.

from $9.99

(8)

Bearings

“It fits in Ford. I drove only few hundred miles can’t say much about it.”

from $73.99

(17)

Drive Shaft Center Support Bearing

“Muy bueno y se ajusto como si fuera original”

FAQs for 1969 Ford F-250 Pickup Drive Shafts and Axles

What are the best-selling Drive Shafts and Axles for 1969 Ford F-250 Pickups?

Out of 30 Drive Shafts and Axles that fit 1969 Ford F-250 Pickups, the following parts are the top sellers:

Universal Joint, Greaseable 1310 Series OSR (10855076) – $31.99
Universal Joint, Greaseable 1350 Series (10855082) – $44.99
Center Support Bearing Motor Mount: Center, 1 Piece (5300924) – $21.49

What’s the price range for 1969 Ford F-250 Pickup Drive Shafts and Axles?

The prices of Drive Shafts and Axles for the 1969 Ford F-250 Pickup range from $4.99 up to $689.99 for the most premium parts.

What is the average price of a Drive Shafts and Axle for a 1969 Ford F-250 Pickup?

The average price for Drive Shafts and Axles for the 1969 Ford F-250 Pickup is $102.08. Keep in mind the variety of part types within our Drive Shafts and Axle category, where you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drive Shafts and Axles for other Ford F-250 Pickup model years?

Yes, we carry Drive Shafts and Axles for 40 model years of Ford F-250 Pickups between 1953 and 1997. The following model years are the most popular for Drive Shafts and Axle purchases: 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, and 1989.

What are the cheapest Drive Shafts and Axles for my 1969 Ford F-250 Pickup?

The cheapest 1969 Ford F-250 Pickup Drive Shafts and Axles we carry are:

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (11642707) – $4.99
Pinion Yoke Dust Shield For Dana 60 & 70 (11642306) – $7.99
Mighty Seal (11644527) – $7.99
Multi Purpose Seal (18444966) – $8.49
Bearings (3272400) – $9.99

Does Advance Auto Parts sell Drive Shafts and Axles for any other 1969 Ford models?

Yes. We stock Drive Shafts and Axles for 24 other popular 1969 Ford models. Some of the most popular are 1969 Mustang Drive Shafts and Axles, 1969 Thunderbird Drive Shafts and Axles, 1969 Bronco Drive Shafts and Axles, 1969 Country Squire Drive Shafts and Axles, and 1969 LTD Drive Shafts and Axles.

What are the top-rated Drive Shafts and Axles that fit the 1969 Ford F-250 Pickup?

Based on 776 reviews by customers, our 1969 Ford F-250 Pickup Drive Shafts and Axles have an average customer rating of 4 stars. These are the highest-rated categories of Drive Shafts and Axles for the 1969 Ford F-250 Pickup and their top-rated products:

Drive Shaft Center Supports
- Drive Shaft Center Support Bearing (3276791) – $73.99
- Drive Shaft Center Support Bearing (15040008) – $44.99
Axle Shaft Universal Joints
- Universal Joint, Greaseable 1310 Series OSR (10855076) – $31.99
- Universal Joint (10265508) – $15.99
- Universal Joint (10855078) – $38.99

What types of Drive Shafts and Axles do you sell for my 1969 Ford F-250 Pickup?

As of 11/2/25, these are some of the most in-demand types of Drive Shafts and Axles for a 1969 Ford F-250 Pickup:

Can I get help with 1969 Ford F-250 Pickup Drive Shafts and Axle orders?

Contact our customer support team by chat or phone, through the help desk page, where you can find instant answers about Ford Drive Shafts and Axles and more.

What is your return policy for Ford F-250 Pickup Drive Shafts and Axles?

Advance Auto Parts keeps returns simple. For new Ford F-250 Pickup Drive Shafts and Axles and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1969 Ford F-250 Pickup Drive Shafts and Axles

Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Non-Engraved Caps (Part No.29079)

Driveworks – Oil Seal (Part No.S-5131)

Yukon Gear – Full Floating Axle Seal For 10.25" Ford (Part No.30041)

National – Bearings (Part No.15245)

National – Multi-Purpose Bearing (Part No.307-L)

National – Drive Shaft Center Support Bearing (Part No.HB-88508-A)

National – Drive Shaft Center Support Bearing (Part No.HB-88508-AA)

Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Spicer – Axle Shaft Universal Joint, Greaseable, 1310WJ Series (Part No.5-3226X)

Spicer – Universal Joint, Greaseable 1350 Series (Part No.5-178X)

Yukon Gear – Dana 44 Front Axle Bearing And Seal Kit Replacement (Part No.10019)

Yukon Gear – R1561Tv Rear Axle Bearing And Seal Kit (Part No.10002)

National – Multi Purpose Seal (Part No.713771)

National – Multi Purpose Seal (Part No.7412S)

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Yukon Gear – Flange Yoke For Ford 9.75" (Part No.41066)

Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)

National – Multi-Purpose Bearing (Part No.B-5020)

Driveworks – Cylindrical Bearing (Part No.S-R1561TV)

FAG US – Cup (Part No.LM48510)

FAG US – Cone (Part No.KLM48548)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Yukon Gear – Spindle Bearing For Dana 44 (Part No.33493)

Spicer – Universal Joint, Greaseable 1310 Series OSR (Part No.5-153X)

Spicer – Universal Joint (Part No.5-1310X)

Driveworks – Universal Joint (Part No.DW-331BL)

Spicer – Universal Joint, Greaseable 1350 Series (Part No.5-178X)

Spicer – Universal Joint (Part No.5-1350X)

Spicer – Axle Shaft Universal Joint, Non-Greaseable, 1310 Series, Wheel Joint ISR (Part No.5-260X)

Spicer – Universal Joint (Part No.5-1350-1X)

Yukon Gear – Mighty Seal (Part No.30062)

Yukon Gear – Mighty Seal (Part No.30083)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

National – Drive Shaft Center Support Bearing (Part No.HB-88508-A)

National – Drive Shaft Center Support Bearing (Part No.HB-88107-A)

National – Drive Shaft Center Support Bearing (Part No.HB-88508)