1969 Ford F-250 Pickup Differentials

Name: Replacement Axle For Dana 44-IFS Ford F250, Right Hand, 23.65" Inner, 81-91, 30 Spline
Brand: Yukon Gear
SKU: 21470
Price: 193.99 USD

Find your specific 1969 Ford F-250 Pickup original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1969 Ford F-250 Pickup Differentials

from

$193.99

Yukon replacement axle for Dana 44-IFS Ford F250, Right hand, 23.65″ inner, 81-91, 30 spline. Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:

30 spline
23.65″ long
Fits Dana Spicer 44 IFS in 1981-1991 Ford F250
Right hand inner
5-760X U-joint size

from

$892.99

Yukon replacement positraction internals for Dana 60 and 61 (full-floating) with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits Dana Spicer 60 with Trac Loc positraction with 30 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$6.99

Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:

35 spline
8 x 3.96″ bolt pattern
Cut to length design fits 40″-43.5″ applications
Fits Dana Spicer 60, 70 and 80

from

$56.99

Standard Open & TracLoc cross pin shaft for 10.25″ Ford.

Product Features:

Cross pin shaft
Fits Ford 10.25″

from

$3.29

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$6.99

Product Features:

Oil baffle for Dana Spicer 60 and Dana Spicer 70U

from

$59.99

Product Features:

Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
Interlocking design makes installation much easier

from

$10.99

Replacement crush sleeve for Dana 44 & Dana 50 APROX 2.650″ long.

Product Features:

Crush sleeve for Dana Spicer 44 and 50
2.650″ tall

from

$12.99

Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:

Roll pin for Dana Spicer 30 and Dana Spicer 44
0.235″ diameter

from

$23.49

Product Features:

Brand may vary by location

from

$234.99

Yukon replacement trail repair kit for Dana 30 and 44 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:

Fits Dana Spicer 30 and 44
1310 u-joint size
Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker

from

$939.99

Differential

from

$6.99

Ring Gear bolt for Ford 10.25″ & 10.5″. 1/2″ x 20.

Product Features:

Ring gear bolt for Ford 10.25″ and 10.5″
1/2″ x 20 thread

from

$596.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

from

$38.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$16.99

ZIP locker switch.

Product Features:

Switch

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$489.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Dana Spicer 60
9.75″ ring gear diameter
29 spline pinion
12 ring gear bolts
4.88 ratio
Thick gear for 4.11 and down carrier

from

$219.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M88010 race
All steel construction

from

$11.48

Pinion Seal

from

$304.99

Product Features:

Standard open carrier case
Fits Dana Spicer 44 with 19 spline axles
3.73 ratio and down only
Does not include spider gears

from

$369.99

Product Features:

Fits Chrysler Dana Spicer 60 with 35 spline axles
4.10 and down ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$30.99

Pinion gear thrust washer for 9.75″ Ford.

Product Features:

Pinion gear thrust washer
Fits Ford 9.75″

from

$93.99

Product Features:

Fits reverse rotation Dana Spicer 60
Steel

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 60

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

Popular 1969 Ford F-250 Pickup Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential Lock Thrust Blocks

Maybe you’re in the middle of a full rebuild of that 1969 Ford F-250 Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 246 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1969 Ford F-250 Pickup running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Ford F-250 Pickup. Yukon Gear, National, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1969 Ford F-250 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 336 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Differential Master Bearing Kit – Timken with 1.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1969 Ford F-250 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1969 Ford F-250 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Ford F-250 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Bearings and Differential Pinion Seals categories, plus more. For a 1969 Ford F-250 Pickup, our most popular Driveworks Differentials include:

from $8.49

(7)

Tapered Roller Bearing

Differential Bearings

from $10.49

(3)

Oil Seal

Differential Pinion Seals

Top 1969 Ford F-250 Pickup Differentials from National

National products are another trusted brand when it comes to Differentials for your 1969 Ford F-250 Pickup. Popular National parts include:

from $9.99

(8)

Bearings

Rear Differential Pinion Bearings

from $23.29

(4)

Multi Purpose Seal

Differential Pinion Seals

from $22.99

(3)

Bearings

Differential Bearings

FAQs for 1969 Ford F-250 Pickup Differentials

What are the most purchased Differentials for the 1969 Ford F-250 Pickup?

Out of 246 Differentials for the 1969 Ford F-250 Pickup, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $6.49

(10)

Axle Housing Cover Gasket

Rear Housing Cover Gaskets

from $11.99

This product is not rated

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24

Differential Ring Gear Bolts

What are the top-rated 1969 Ford F-250 Pickup Differentials?

Top-rated Differentials for your 1969 Ford F-250 Pickup based on customer reviews/ratings are:

from $8.29

(4)

DIFFERENTIAL GASKET

“Great Product”

from $168.99

(1)

Differential Master Bearing Kit – Timken

“This was supposed to be an exact fit according to the website for a1999 dodge ram 1500 with 4wd. The bearings look to be correct but the crush sleeve,”

from $143.99

(1)

Differential Master Bearing Kit – Koyo

“I bought this kit to have my front axle regeared. The shop said that this kit was missing the axle seals, crush sleeve for the pinion, and didn’t have”

1969 Ford F-250 Pickup Differentials

More 1969 Ford F-250 Pickup Differentials

Essential 1969 Ford F-250 Pickup Differentials

Yukon Gear – Replacement Axle For Dana 44-IFS Ford F250, Right Hand, 23.65" Inner, 81-91, 30 Spline (Part No.21470)

Yukon Gear – Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles (Part No.16086)

Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

Yukon Gear – Standard Open & Tracloc Cross Pin Shaft For 10.25" Ford (Part No.33329)

Pro-King – Differential Cover Gasket (Part No.764A303)

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Yukon Gear – Replacement Crush Sleeve For Dana 44 & Dana 50 (Part No.33088)

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Driveworks – Tapered Roller Bearing (Part No.S-HM-803149)

Yukon Gear – Replacement Trail Repair Kit For Dana 30 And 44 With 1310 Size U/Joint And U-Bolts (Part No.32279)

Yukon Gear – Differential (Part No.26040)

Yukon Gear – Ring Gear Bolt For Ford 10.25" & 10.5" (Part No.33042)

Powertrax – Grip PRO Traction System (Part No.GT436035)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

National – Shaft Repair Sleeve (Part No.99155)

Yukon Gear – Zip Locker Switch (Part No.34015)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.88 Ratio, Thick (Part No.24605)

Yukon Gear – Bearing Race Driver (Part No.56023)

SKF – Pinion Seal (Part No.J7010247045SKF)

Yukon Gear – Replacement Standard Open Carrier Case For Dana 44, 19 Spline, 3.73 & Down (Part No.20019)

USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.59016)

Yukon Gear – Pinion Gear And Thrust Washer For 9.75" Ford (Part No.33302)

Yukon Gear – Steel Cover For Dana 60 Reverse Rotation (Part No.32320)

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Popular 1969 Ford F-250 Pickup Differentials Categories