1969 Ford Bronco Differentials

Essential 1969 Ford Bronco Differentials

Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)

Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles

from

$30.99
Product Features:
  • Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 55019)

Axle Housing Cover Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 9" 3.250" Aluminum Case, HD Drop Out Housing, With Load Bolt (Part No.32152)

9" 3.250" Aluminum Case, HD Drop Out Housing, With Load Bolt

from

$1070.00
9″ Yukon 3.250″ aluminum case, HD Drop Out housing, with load bolt. Made from A356-T6 aluminum & featuring a through bolt design, this dropout is rated for up to 1400 horsepower!

Product Features:
  • Fits Ford 9″
  • 3.250″ carrier race diameter
  • A356-T6 aluminum
  • Thru-bolt design added strength
  • With load bolt
See More

Yukon Gear – Pinion Install Kit For Dana 30 Front Differential (Part No.13016)

Pinion Install Kit For Dana 30 Front Differential

from

$159.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 30
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Aggressive (Part No.16151)

Replacement Clutch Set For Dana 44 Powr Lok, Aggressive

from

$232.99
Product Features:
  • Clutch kit
  • Fits Dana Spicer 44 and Chrysler 8.75″ Powr Lok
  • Aggressive design
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

Cover Bolt For Ford 7.5", 8.8" & 9.75"

from

$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:
  • 35 spline
  • 8 x 3.96″ bolt pattern
  • Cut to length design fits 40″-43.5″ applications
  • Fits Dana Spicer 60, 70 and 80
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Master Overhaul Kit For Dana 44 IFS Differential For ’80-’82 (Part No.14143)

Master Overhaul Kit For Dana 44 IFS Differential For '80-'82

from

$509.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 1980-1982 Dana Spicer 44 IFS
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and gasket.
See More

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential with Daytona Pinion Support (Part No.37038)

Master Overhaul Kit for the Ford 9" LM603011 Differential with Daytona Pinion Support

from

$273.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Ford 9″ with LM603011 carrier races and Daytona pinion support
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush and gasket.
See More

Motive Gear – Differential Mini Spool (Part No.MS88-31)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL 8.8 FORD 31SPL
See More

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

National – Bearings (Part No.02820)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)

Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20

from

$16.99
Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.

Product Features:
  • Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
  • Fits standard open differentials only
  • 0.750″ diameter
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

Tapered Roller Bearing

from

$6.29
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up (Part No.20026)

Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up

from

$164.99
Yukon replacement standard open carrier case for Dana 30, 3.73 & up, 1.943″ tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 30
  • 3.73 and up ratio only
  • Does not include spider gears
See More

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

from

$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
  • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
See More

Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)

Trao Loc Spring For Ford 8.8", 31 Spline

from

$99.99
Product Features:
  • Trac Loc spring for Ford 8.8″
  • 31 spline applications only
See More

Yukon Gear – Ford 9" Pinion Support, 35 Spline, 10 Hole, No Races Included (Part No.32165)

Ford 9" Pinion Support, 35 Spline, 10 Hole, No Races Included

from

$569.99
Ford 9″ pinion Support, 35 spline, 10 hole, no races included.

Product Features:
  • Fits Ford 9″ with 35 spline pinion
  • Larger inner pinion bearing reduces gear deflection under high load
  • 6061 aluminum
  • 10 bolt holes
  • Does not include races
See More

Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)

Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt

from

$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.

Product Features:
  • Ring gear bolt for Ford 8″ and 9″
  • For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
  • 1.0″ long
See More

Yukon Gear – Replacement Crush Sleeve For Dana 44 & Dana 50 (Part No.33088)

Replacement Crush Sleeve For Dana 44 & Dana 50

from

$10.99
Replacement crush sleeve for Dana 44 & Dana 50 APROX 2.650″ long.

Product Features:
  • Crush sleeve for Dana Spicer 44 and 50
  • 2.650″ tall
See More

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

3.062" Side Adjuster For Ford 9"

from

$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:
  • Side adjuster
  • Fits Ford 9″
  • 3.062″ designs only
See More

Yukon Gear – 8.8" Ford Low Profile Ta HD Aluminum Rear Cover (Part No.32114)

8.8" Ford Low Profile Ta HD Aluminum Rear Cover

from

$419.99
8.8″ Ford low profile TA HD Aluminum rear Cover. This cover will not fit vehicles with independent rear suspension.

Product Features:
  • Fits Ford 8.8″
  • Aluminum girdle cover
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

Yukon Gear – Dana 44 Carrier Installation Kit Replacement (Part No.57003)

Dana 44 Carrier Installation Kit Replacement

from

$128.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 44
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – Zip Locker Bulkhead Fitting (Part No.34001)

Zip Locker Bulkhead Fitting

from

$27.99
Product Features:
  • Bulkhead fitting
See More

Pro-King – Differential Bearing Cup (Part No.742G256)

Differential Bearing Cup

from

$8.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Popular 1969 Ford Bronco Differentials Categories

1969 Ford Bronco Differentials

Maybe you’re in the middle of a full rebuild of that 1969 Ford Bronco. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 464 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1969 Ford Bronco running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Ford Bronco. Yukon Gear, Driveworks, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1969 Ford Bronco, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 732 reviews in this category, some of the top rated parts include Differential Carrier Gasket with 5.0 stars and Multi Purpose Seal with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 1969 Ford Bronco rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1969 Ford Bronco Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Ford Bronco demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Bronco the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Complete Differentials and Differential Open Unit and Components categories, plus more. For a 1969 Ford Bronco, our most popular Powertrax Differentials include:
Lock Right Locker
from $350.99
(1)
Lock Right Locker
Complete Differentials
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
Differential Open Unit and Components

Top 1969 Ford Bronco Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1969 Ford Bronco. Popular Driveworks parts include:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
Oil Seal
from $10.49
(3)
Oil Seal
Differential Pinion Seals
Oil Seal
from $4.29
(1)
Oil Seal
Differential Pinion Seals

FAQs for 1969 Ford Bronco Differentials

What are the most purchased Differentials for the 1969 Ford Bronco?

Out of 464 Differentials for the 1969 Ford Bronco, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings
Axle Housing Cover Gasket
from $6.79
(9)
Axle Housing Cover Gasket
Front Housing Cover Gaskets

What are the top-rated 1969 Ford Bronco Differentials?

Top-rated Differentials for your 1969 Ford Bronco based on customer reviews/ratings are:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
“seals”
Multi Purpose Seal
from $23.29
(4)
Multi Purpose Seal
“Works well fit right in. Love national seals”
Multi Purpose Seal
from $15.79
(3)
Multi Purpose Seal
“good quality”