1969 Dodge W200 Pickup Differentials

Essential 1969 Dodge W200 Pickup Differentials

Yukon Gear – Minor Install Kit For Dana 60 And 61 Differential (Part No.12026)

Minor Install Kit For Dana 60 And 61 Differential

from

$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

National – Bearings (Part No.02872)

Bearings

from

$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dana 44 Carrier Installation Kit Replacement (Part No.57003)

Dana 44 Carrier Installation Kit Replacement

from

$128.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 44
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles

from

$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
  • Smooth design
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Yukon Gear – Differential (Part No.26037)

Differential

from

$854.99
Differential

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Seal Housing For Dana 60, Zip Locker, With O-Rings

from

$79.99
Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:
  • Seal housing for Dana Spicer 60
  • Includes o-rings
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 44 (Part No.17017)

Spartan Locker Replacement Cross Pin For Dana 44

from

$46.99
Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Dana Spicer 44
  • Works with Spartan Locker or standard open spider gears
See More

FAG US – CUP (Part No.LM501310)

CUP

from

$9.99
CUP

National – Bearings (Part No.HM807010)

Bearings

from

$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

USA Standard Gear – 8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron (Part No.59001)

8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron

from

$474.99
Product Features:
  • Dropout housing
  • Fits Chrylser 8.75″
  • ’89’ case design
  • Nodular iron for added strength
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – Replacement Chrome Cover For Dana 44 (Part No.32004)

Replacement Chrome Cover For Dana 44

from

$67.99
0.080″ thick Chrome replacement cover for Dana 44.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • Chrome
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

Replacement Carrier Shim Kit For Dana 70 & 70HD

from

$126.99
Product Features:
  • Carrier shim kit
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

Chrysler 8.75" (Coarse Spline) Pinion Nut Washer

from

$9.99
Chrysler 8.75″ (coarse spline) pinion nut washer.

Product Features:
  • Pinion nut washer
  • Fits Chrysler 8.75″ with 10 spline pinion
See More

Yukon Gear – Zip Locker Switch (Part No.34015)

Zip Locker Switch

from

$16.99
ZIP locker switch.

Product Features:
  • Switch
See More

Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM

from

$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

Product Features:
  • Axle Redi-sleeve
  • Fits Dana Spicer 44
See More

USA Standard Gear – Dana 44 Front Bearing Kit Replacement (Part No.58036)

Dana 44 Front Bearing Kit Replacement

from

$222.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, marking compound and brush.
See More

Yukon Gear – Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.34023)

Zip Locker For Dana 60 With 30 Spline Axles, 4.56 & Up

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)

Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up

from

$369.99
Product Features:
  • Fits Chrysler Dana Spicer 60 with 35 spline axles
  • 4.56 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Differential Cover Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.C887373L)

Performance Differential Ring and Pinion

from

$264.99


Product Features:
  • CHRY 9BLT 8.75 LATE R/P 3.73 MGP 29SP USE MG7260-C875/MG1350-C87529
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Motive Gear – Differential Pinion Seal (Part No.5126B)

Differential Pinion Seal

from

$9.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)

Pinion Install Kit For Dana 44 Differential

from

$264.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)

Dana 44 Pinion Gear Thrust Washer

from

$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
See More

1969 Dodge W200 Pickup Differentials

Maybe you’re in the middle of a full rebuild of that 1969 Dodge W200 Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 417 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1969 Dodge W200 Pickup running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1969 Dodge W200 Pickup. FELPRO, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1969 Dodge W200 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 438 reviews in this category, some of the top rated parts include Tapered Roller Bearing with 5.0 stars and Oil Seal with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 1969 Dodge W200 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1969 Dodge W200 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1969 Dodge W200 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your W200 Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Dorman Differentials

We carry Dorman parts in our stock across Differential Ring and Pinions categories, plus more. For a 1969 Dodge W200 Pickup, our most popular Dorman Differentials include:
Differential Ring And Pinion Set
from $384.99
(2)
Differential Ring And Pinion Set
Differential Ring and Pinions

Top 1969 Dodge W200 Pickup Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1969 Dodge W200 Pickup. Popular Felpro parts include:
Differential Cover Gasket
from $9.49
(34)
Differential Cover Gasket
Rear Differential Cover Gaskets
Axle Housing Cover Gasket
from $6.49
(10)
Axle Housing Cover Gasket
Rear Housing Cover Gaskets
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

FAQs for 1969 Dodge W200 Pickup Differentials

What are the most purchased Differentials for the 1969 Dodge W200 Pickup?

Out of 417 Differentials for the 1969 Dodge W200 Pickup, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Multi Purpose Seal
from $23.29
(4)
Multi Purpose Seal
Differential Pinion Seals
Bearings
from $22.99
(3)
Bearings
Differential Bearings

What are the top-rated 1969 Dodge W200 Pickup Differentials?

Top-rated Differentials for your 1969 Dodge W200 Pickup based on customer reviews/ratings are:
Tapered Roller Bearing
from $8.49
(7)
Tapered Roller Bearing
“Nice to find them in stock. Fit well and got my SUV up and back on the road quickly”
Oil Seal
from $10.49
(3)
Oil Seal
“Fit the rear Dana 44 on my TJ just fine and stopped the leaking.”
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”