1958 Dodge W200 Pickup Differentials

Find your specific 1958 Dodge W200 Pickup original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1958 Dodge W200 Pickup Differentials

from

$37.99

Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD

from

$313.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$249.99

Product Features:

Spider gear kit
Fit Dana Spicer 70 and 80 open differential with 35 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$109.99

Product Features:

Drive flange cap
Fits Dana 44

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$16.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$329.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits standard rotation Dana Spicer 44 front
Included are carrier bearings and races, pinion bearings and races, pinion seal, oil baffles and slingers , marking compound and brush.

from

$51.99

Product Features:

MINI INSTALL KIT CHRYSLER 8.75 8 3/4″ LATE

from

$42.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$19.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$28.99

TAPERED ROLLER BEARI

from

$20.29

Product Features:

Brand may vary by location

from

$10.29

Product Features:

Brand may vary by location

from

$684.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$511.99

from

$6.49

Product Features:

DANA PRELOAD SHIMS (D60 & D70)

from

$17.99

Chrysler 8.75 “89” case Crush Sleeve. Approx 3.000″ long.

Product Features:

Crush sleeve for Chrysler 8.75″ ’89’ case
3.000″ tall

from

$426.99

RngPnn

from

$193.99

Product Features:

DANA-44 R/P 4.89 STD MG 23053-5X

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$27.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$111.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits Chrysler 8.75″ ’89’ case
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$494.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Dana Spicer 70
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush and gasket.

from

$9.99

Product Features:

Preload spacer
Fits Dana Spicer 70

from

$17.99

Product Features:

Pinion depth shims for Dana Spicer 60 and 70U

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Popular 1958 Dodge W200 Pickup Differentials Categories

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential End Yokes

Rear Differential Pinion Bearings

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Complete Differentials

Differential Crush Sleeves

Differential Pinion Shims

Differential Gear Install Kits

Automatic Transmission Differential Carrier Gaskets

Maybe you’re in the middle of a full rebuild of that 1958 Dodge W200 Pickup. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 57 different Differentials in our inventory ranging from $4.99 to $1,015.00. That means you can find the exact parts or products you need to keep that 1958 Dodge W200 Pickup running smoothly.

Differentials are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1958 Dodge W200 Pickup. National, FELPRO, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1958 Dodge W200 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 30 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Bearings with 1.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1958 Dodge W200 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1958 Dodge W200 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1958 Dodge W200 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your W200 Pickup the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Front Differential Cover Gaskets and Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1958 Dodge W200 Pickup, our most popular Felpro Differentials include:

from $15.99

(1)

Differential Cover Gasket

Front Differential Cover Gaskets

from $6.49

(1)

Differential Carrier Gasket

Automatic Transmission Differential Carrier Gaskets

from $6.49

(10)

Axle Housing Cover Gasket

Rear Housing Cover Gaskets

Top 1958 Dodge W200 Pickup Differentials from National

National products are another trusted brand when it comes to Differentials for your 1958 Dodge W200 Pickup. Popular National parts include:

from $23.29

(4)

Multi Purpose Seal

Differential Pinion Seals

from $22.99

(3)

Bearings

Differential Bearings

from $43.99

(2)

Shaft Repair Sleeve

Differential Pinion Pilot Bearings

FAQs for 1958 Dodge W200 Pickup Differentials

What are the most purchased Differentials for the 1958 Dodge W200 Pickup?

Out of 57 Differentials for the 1958 Dodge W200 Pickup, the most popular in our inventory are:

from $10.49

(3)

Oil Seal

Differential Pinion Seals

from $8.99

This product is not rated

Bearings

Differential Bearings

from $17.49

(1)

Bearings

Differential Bearings

What are the top-rated 1958 Dodge W200 Pickup Differentials?

Top-rated Differentials for your 1958 Dodge W200 Pickup based on customer reviews/ratings are:

from $38.49

(2)

Bearings

“nice finish and function. Should perform well.”

from $20.99

(2)

Bearings

“this is not a front wheel bearing”

from $193.99

(1)

Differential Ring and Pinion

“Hard to find items with a low price compared to others in the country, and shipping costs where the best.”

1958 Dodge W200 Pickup Differentials

More 1958 Dodge W200 Pickup Differentials

Essential 1958 Dodge W200 Pickup Differentials

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Dorman – Differential Pinion Yoke Assembly (Part No.697-545)

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Motive Gear – Differential Pinion Seal (Part No.9316)

Yukon Gear – Bearing Install Kit For Dana 44 Differential (Straight Axle) (Part No.11020)

Motive Gear – Differential Gear Install Kit (Part No.C8.75IKL)

Richmond Gear – Differential Gear Install Kit (Part No.83-1041-B)

National – Bearings (Part No.25523)

FAG US – TAPERED ROLLER BEARI (Part No.KT47)

Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)

Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)

Powertrax – Grip LOK Traction System (Part No.LK436035)

Powertrax – Grip LS Traction System (Part No.LS309231)

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Yukon Gear – Chrysler 8.75 "89" Case Crush Sleeve (Part No.33092)

Richmond Gear – RngPnn (Part No.69-0222-1)

Motive Gear – Differential Ring and Pinion (Part No.D44-489)

National – Bearings (Part No.02820)

National – Bearings (Part No.HM807010)

Yukon Gear – Minor Install Kit For Chrysler 89 8.75" Differential (Part No.12007)

USA Standard Gear – Master Overhaul Kit Dana 70 Differential (Part No.37022)

Yukon Gear – Preload Spacer For Dana 70 (Part No.55070)

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Popular 1958 Dodge W200 Pickup Differentials Categories