from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Provides the robust seal needed to contain peak combustion pressures and temperatures
Validated for fit, form, and function
Unsurpassed quality you can trust
Unsurpassed quality you can trust

from

$119.99

Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:

For Chevrolet small block 265 and 400
Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
Designed for use with OE specifications for fit and function
Made from high quality material

from

$1.99

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:

Fits Chevy V8
Standard Y Top 1/4 In-20 X 5/8 in L
Chrome Plated Steel
Overall Length: 4.64″
Installed Length: 4.00″
Pack of 4

from

$80.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$34.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$3.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Ball
1 Nut
Utilizes ISO & QS certified manufacturing

from

$128.99

Product Features:

Use W/ Valve Springs Part #5762, 5795
Use W/ Locks Part #9612
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$94.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$316.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$0.65

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$0.95

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$4.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

from

$18.99

Product Features:

Valve Seats
Performer Series
50-State Street Legal

from

$14.99

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$1191.99

Product Features:

Complete Single For Flat Tappet
100cc Combustion Chamber Volume
290cc Intake/110cc Exhaust Runner Volume
2.19 in. Intake/1.88 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$2.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$127.99

Product Features:

Replacement Lifters For Performer Cam
50 State Legal

from

$553.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$155.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 Psi Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$149.99

High Performance head bolts are available with a reduced wrenching hex or 12-point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.

Product Features:

1/2″ 12-Point Socket Size(s)
8740 Chromoly
Black Oxide
Big Block Chevy Late Bowtie Aluminum, World Prod. Merlin, Iron Dart, Pro-1 and Pro Top Line Heads
Sold As A Kit

from

$47.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$35.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Application specific design to ensure a perfect fit and premium seal
Premium quality parts you can trust
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted

from

$72.99

The Edelbrock #4649 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Chevy 262-400 1959-86
Tall
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$371.99

The Edelbrock part #41443 Classic Series Valve Covers are designed for Chevy 262-400 V8 1959-86 (with oil fill hole) applications and have a Black powder coat finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:

Small Block Chevy 262-400 1959-86
Tall
Black Aluminum
Set Of Two

from

$23.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Premium quality parts
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted
Contains all the parts needed to complete the repair unless otherwise noted

1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads

More 1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads

Essential 1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads

Felpro – Cylinder Head Gasket: Embossed Steel, Without Head Bolts (Part No.7733 SH-1)

Spectre – Engine Dress Steel Up Kit (Part No.54083)

Dorman – Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (sold by each) (Part No.090-046)

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Edelbrock – Sure Seat Valve Springs for Big-Block Chevy 396-402-427-454 V8 (Part No.5862)

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Sealed Power – Engine Rocker Arm Kit (Part No.R-826)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9731)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)

Sealed Power – Engine Intake Valve (Part No.V-1926)

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Mr. Gasket – Cylinder Head Dowel Pins (Part No.4375)

Edelbrock – Performer Big-Block Chevy Oval Port Hydraulic Flat Tappet Cam (Part No.60499)

Sealed Power – Engine Push Rod (Part No.RP-3181)

Edelbrock – Performer-Plus Hydraulic Flat Tappet Lifters (Part No.9738)

Competition Cams – SUPER VALVE LOCKS, 3/8" 1 ST (Part No.612-16)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

ARP Auto Racing – ARP Cylinder Head Bolt Kit (Part No.135-3703)

Felpro – Cylinder Head Gasket Set (Part No.HS 8006 PT-1)

Felpro – Cylinder Head Gasket Set (Part No.HS 7733 SH-2)

Edelbrock – Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel (Part No.4649)

Edelbrock – Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Black Aluminum (Part No.41443)

Felpro – CYLINDER HEAD GASKET SPACER SHIM (Part No.8180 SP-1)

Popular 1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads Categories

1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads

Valve Cover and Cylinder Heads Brands To Make Your 1969 Chevrolet K30 Pickup Last

Popular Edelbrock Valve Cover and Cylinder Heads

Top 1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads from Felpro

FAQs for 1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 1969 Chevrolet K30 Pickup?

What are the top-rated 1969 Chevrolet K30 Pickup Valve Cover and Cylinder Heads?