from

$316.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$216.99

Product Features:

Imperial Swirl-Cool« engine oil cooler kit
Size: 1-1/2″ x 6-1/2″ x 18″
Heavy-duty applications
All except Chevrolet V8 applications
Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
Heavy duty applications
All except Chevrolet V8 applications

from

$37.49

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:

Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
Bolt Kits Come With Washers
Stud Kits Come Complete With A Special Locking
Easily Installed Without The Worry Of Cross-Threading

from

$3552.99

SuprChrg

from

$25.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$47.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$91.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Includes Fel-Pro gaskets (#1 brand of gaskets)
Provides exact gaskets application requires
Recommended for street rod or muscle car
Delivers dependable performance and superior service life
Application-specific design for perfect fit and correct operation

from

$16.49

Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.

Product Features:

Fits Chevy Small Block 1955-79 283-400 CID
Block Mounted
Chrome Plated Steel

from

$206.99

Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shaf

Product Features:

25% Higher volume high performance upgrade of the M155HV
CNC machined phosphate coated cast iron housing and cover
Patented billet steel shark tooth helical gears
Includes chrome moly steel intermediate drive shaft with pinned steel guide
Includes lower pressure spring; not installed
Uses 3/4 inch diameter press-fit screen

from

$0.65

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$42.49

Melling offers a replacement oil pump drive gear for several Jeep and GM applications. This gear should be replaced should the original gear show ware or be damaged or lost during the rebuilding process.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$8.49

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Retro-fit performance
High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
Eliminates frequent lash adjustments
Significant friction reduction substantially increases horsepower and fuel economy
Delivers quieter engine operation
Application-specific design for perfect fit and correct operation

from

$17.79

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Hypereutectic
Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
Piston skirts protected by next-gen DUROSHIELD« coating.
TAC┐ ring groove geometry
Weight matched to +/- 2 grams.

from

$192.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Application-specific design for perfect fit and correct operation
Face of top rings coated with latest-generation plasma-moly
Plasma-moly ring face decreases friction and resists scuffing
Delivers dependable performance and superior service life
Recommended for all racing applications (where file fitting the ring end gap delivers maximum power)

from

$1268.99

The Edelbrock #5073 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:

Complete Pair For Hydraulic Flat Tappet
70cc Combustion Chamber Volume
2.02cc Intake/60cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$111.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$25.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$179.99

High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.

Product Features:

Fits small block Chevy engines
Polished cast aluminum construction
Tall design cover for added rocker clearance
Sold as a pair
Stops Gasket From Moving
A Perfect Fit
Beautifully Polished To A High Luster

from

$46.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$2.99

Several Melling oil pump applications require the use of an oil pump shaft guide. Melling provides high quality shaft guides for specific pump applications. An oil pump shaft guide is necessary to connect the oil pump drive shaft to the intermediate drive shaft. Melling recommends installing a new oil pump shaft guide when it is needed.

Product Features:

Manufactured from high quality nylon for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$242.99

Remanufactured precision machined OE crankshafts.

Product Features:

Includes matching rod and main bearings.
Journals Micropolished.
All units subject to complete quality inspection.

from

$28.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$24.99

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
100% USA Made
Meets or exceeds OEM performance requirements
Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

from

$108.99

This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.

Product Features:

Small Block Chevy 283-350 1955-’79
Drivers Side Dipstick
OEM Style – Stock Depth & Capacity

from

$2.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$7.29

you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Product Features:

Nominally Rated At 170,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
Premium Grade Oil Pump Stud
The Studs Come With Flat Washers And Nuts
Black Oxide Finished 8740
Hi-Volume
3.125″

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features: