1968 Plymouth Belvedere Drivetrains
More 1968 Plymouth Belvedere Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1968 Plymouth Belvedere, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1968 Plymouth Belvedere Drivetrains
Yukon Gear – Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case (Part No.32052)
from
$564.99
89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75″ Chrysler. This dropout does not come with fill plug (Part number CHY612017).
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- ’89’ case design
- Nodular iron for added strength
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Motive Gear – Differential Carrier Gear Kit (Part No.C7.25BI)
Yukon Gear – Steel Spool For Chrysler 8.75" With 30 Spline Axles (Part No.32040)
from
$264.99
Yukon Performance 2-1/16″ deck steel spool for 8.75″ Chrysler with 30 spline axles. Spool uses 2.050″ journal bearings (LM104949/12). Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ with 30 spline axles
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)
Motive Gear – Differential Bearing Kit – Koyo (Part No.RA29R)
from
$139.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- DANA-60 BRG & SEAL KIT-UP TO 98 FRD
Felpro – Differential Carrier Gasket (Part No.RDS 6583)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
Driveworks – Differential Pinion Seal (Part No.S-5126)
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Side Gear And Thrust Washer For 7.25" Chrysler (Part No.33279)
from
$69.99
Side gear thrust washer for 7.25″ Chrysler.
Product Features:
See More
Product Features:
- Side gear thrust washer kit
- Fits Chrysler 7.25″
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)
from
$209.99
USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Chrysler 8.25″ 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Crush Sleeve (Part No.3102)
National – Bearings (Part No.387A)
from
$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99212)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)
from
$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.
Product Features:
See More
Product Features:
- U-Joint strap bolt
- Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
- 7290 u-joint size
Powertrax – Grip PRO Traction System (Part No.GT436035)
from
$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Yukon Gear – Minor Install Kit For Chrysler 70-75 8.25" Differential (Part No.12003)
from
$36.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits 1975 and down Chrysler 8.25″
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Extra HD Yoke For Chrysler 8.75" With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41015)
from
$209.99
Yukon extra HD yoke for Chrysler 8.75″ with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 29 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Powertrax – Grip LS Traction System (Part No.LS309231)
from
$511.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)
from
$26.99
Product Features:
See More
- Pinion nut
- Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21408)
from
$284.99
Yukon 1541H alloy cut to fit rear axle for Chrysler 8.75″ measuring 28″-32″ with 30 splines and 5×4.5 bolt pattern. for use with A, C & E-Body. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 30 spline
- Cut to length design fits 28″-32″ applcations
- 5 x 4.5″ bolt pattern
Popular 1968 Plymouth Belvedere Drivetrains Categories
1968 Plymouth Belvedere Drivetrains
You count on your 1968 Plymouth Belvedere to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 241 Drivetrains ranging in price from $2.49 to $919.99, you’re sure to find everything you need for your 1968 Plymouth Belvedere.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like Valvoline, Driveworks, and National. 1968 Plymouth Belvedere Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 12,582 extensive product reviews on 1968 Plymouth Belvedere Drivetrains. Some of the top-rated Drivetrains products we carry are DIFFERENTIAL GASKET with 4.4 stars and Multi Purpose Seal with 4.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1968 Plymouth Belvedere below to get started!
Top-Rated Drivetrains Brands For Your 1968 Plymouth Belvedere
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Plymouth Belvedere running right for years to come. In our inventory you’ll find brands like Valvoline, Driveworks, National, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1968 Plymouth Belvedere back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1968 Plymouth Belvedere, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1968 Plymouth Belvedere Drivetrains
What are the most purchased Drivetrains for the 1968 Plymouth Belvedere?
Out of 241 Drivetrains for the 1968 Plymouth Belvedere, the most popular in our inventory are:
What are the top-rated 1968 Plymouth Belvedere Drivetrains?
Top-rated Drivetrains for your 1968 Plymouth Belvedere based on customer reviews/ratings are:
from
$6.79
(21)
DIFFERENTIAL GASKET
“I always use Fel-Pro gaskets they’re the best, but this gasket to replace the differential gasket on my son’s Jeep when I did a fluid change work and ”
