1968 Mercury Marauder Performance and Racing Products
More 1968 Mercury Marauder Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1968 Mercury Marauder, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1968 Mercury Marauder Performance and Racing Products
MSD Ignition – Coil; Blaster 2; with Ballast and Hardware (Part No.8203)
from
$82.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for stock points or electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Metal Canister Is Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$145.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Gasket (Part No.206G)
from
$35.99
Mr. Gasket standard intake gasket sets are manufactured from a blend of nitrile rubber and fiber, for excellent sealing and durability. They’re precision die-cut for each specific application to ensure a great fit, and can be custom-trimmed for modified ports where needed. The sets come complete with all necessary seals and block-off plates.
Product Features:
See More
Product Features:
- Designed to ensure excellent sealing
- Provides long lasting durability
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1632)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1619)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1018)
from
$49.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Head Gasket (Part No.1132G)
from
$35.99
With the ever-increasing technology in performance and racing engines, supercharged, turbo charged, nitrous-oxide and extreme compression ratios, a demand was created for stronger, more durable engine gaskets. Mr. Gasket, the originator of high performance gaskets, has met the challenge and developed performance gaskets in a variety of materials for all applications to meet the sealing demands of these engines. Mr. Gasket engine gaskets are the most advanced, tested and proven in the performance market today and earned the respect of many professional and sportsman racers.
Product Features:
See More
Product Features:
- Embossed copper
- Provides excellent stability and reduces cyl distortion
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Oil Pan Gasket (Part No.292)
from
$29.99
Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.
Product Features:
See More
Product Features:
- One-piece design
- Eliminates potential leaks
- Prevents over tightening
- Prevents torque loss
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Edelbrock – Sure Seat Valve Springs for Ford 390-428 FE V8 1961-1976 (Part No.5806)
from
$72.99
Product Features:
See More
- Non-Rotator Type
- 1.458 in. Outer Diameter
- 1.062 in. Inner Diameter
- 1.062 in. Coil Blind
- Set of 16
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1420)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1419)
from
$26.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Richmond Gear – RngPnn (Part No.69-0382-1)
from
$369.99
RngPnn
Motive Gear – Performance Differential Ring and Pinion (Part No.F888571)
Edelbrock – Reman Thunder AVS Carb #18059 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18059)
from
$400.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Aluminum Body Material
- Manual Choke Type
- 650 cfm Maximum Flow Rating
Edelbrock – Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9913)
from
$427.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Electric Choke Type
- 750 cfm Maximum Flow Rating
B & M – Automatic Shifter, StarShifter (Part No.80675)
from
$297.99
Features include NHRA/ IHRA reverse lockout, backup light switch, neutral safety switch, polished T-handle. Cable operated for quick installation and accurate shifting. For 2 and 3 speed applications.
Product Features:
See More
Product Features:
- Base Trims For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Polished Aluminum. T-Handle and Cable
Hurst – Manual Shifter, Competition Plus (Part No.3913180)
from
$512.99
The industry standard for over 30 years, this shifter offers state of the art transmission control for popular manual transmissions. Dedicated applications assure a custom fit to a wide variety of vehicles.
Product Features:
See More
Product Features:
- High Ratio Pivot Mechanism
- Adjustable Bias Spring Loads
- Adjustable Stops
- Chrome Plated Steel Bolt On Stick
- Easy Installation
B & M – Automatic Shifter, Megashifter (Part No.80690)
from
$461.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. First off let’s talk function. The Megashifters positive ratcheting funct
Product Features:
See More
Product Features:
- Universal Floor Mount
- Base Can Be Trimmed-Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
Edelbrock – Performer 390 Intake Manifold for Ford FE, Polished Finish (Part No.21051)
from
$875.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer 460; Intake Manifold (Part No.21661)
from
$604.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Weiand – Hi-Ram; Intake Manifold (Part No.1993)
from
$636.99Product Features:
- Square Flange Carburetor Mounting
- Special D-Shaped Port Runner Design
- Large Plenum Chamber
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your en
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)
from
$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
Popular 1968 Mercury Marauder Performance and Racing Products Categories
1968 Mercury Marauder Performance and Racing Products
You count on your 1968 Mercury Marauder to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 54 Performance and Racing Products ranging in price from $10.49 to $875.99, you’re sure to find everything you need for your 1968 Mercury Marauder.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 10 different brands like K&N, Edelbrock, and FRAM. 1968 Mercury Marauder Performance and Racing Products start as low as $10.49!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 205 extensive product reviews on 1968 Mercury Marauder Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) with 3.8 stars and Automatic Shifter, Unimatic Shifter with 4.3 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1968 Mercury Marauder below to get started!
Top-Rated Performance and Racing Products Brands For Your 1968 Mercury Marauder
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Mercury Marauder running right for years to come. In our inventory you’ll find brands like K&N, Edelbrock, FRAM, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 1968 Mercury Marauder back on the road. Some of the top-rated K&N products in these categories are:
from
$17.99
(23)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
FAQs for 1968 Mercury Marauder Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1968 Mercury Marauder?
Out of 54 Performance and Racing Products for the 1968 Mercury Marauder, the most popular in our inventory are:
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
Performance Carburetors
What are the top-rated 1968 Mercury Marauder Performance and Racing Products?
Top-rated Performance and Racing Products for your 1968 Mercury Marauder based on customer reviews/ratings are:
from
$397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
from
$461.99
(1)
Automatic Shifter, Megashifter
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
