1968 Mercedes-Benz 300SEL Belts and Hoses
More 1968 Mercedes-Benz 300SEL Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1968 Mercedes-Benz 300SEL, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1968 Mercedes-Benz 300SEL Belts and Hoses
Rein – AT Cooling Hose (Part No.J200035198RIN)
from
$23.44
AT Cooling Hose
Rein – Transmission Oil Cooling Hose (Part No.TRC0152)
from
$23.99
Rein Automotive transmission oil cooling hoses are manufactured with premium OE quality hose material designed to withstand the high pressure demands of automotive transmission cooling systems. Rein transmission oil cooling hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in transmission cooling systems.
Product Features:
See More
Product Features:
- Manufactured with premium OE quality hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
Cohline – AT Cooling Hose (Part No.J200038074COH)
from
$61.69
AT Cooling Hose
Rein – AT Cooling Hose (Part No.J200034689RIN)
from
$29.00
AT Cooling Hose
Febi – Febi Bypass Hose (Part No.G202025216FEB)
from
$11.16
Febi engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Febi line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.
Product Features:
See More
Product Features:
- All cooling-water hose inner linings are resistant to electrochemical cracking
- high strength and resistance to oil, mud, salt, road debris, and ozone
- Resistance to distilled water and water ethylene glycol mixtures
- Resistance to air temperatures of up to 125C
APA/URO Parts – APA/URO Bypass Hose (Part No.G202016775APA)
from
$3.74
All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.
Product Features:
See More
Product Features:
- All cooling-water hose inner linings are resistant to electrochemical cracking
- high strength and resistance to oil, mud, salt, road debris, and ozone
- Resistance to distilled water and water ethylene glycol mixtures
- Resistance to air temperatures of up to 125C
Rein – Radiator Hose (Part No.CHR0111R)
from
$10.29
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
APA/URO Parts – Overflow Hose (Part No.G2005163696APA)
from
$6.88
Overflow Hose
Rein – Radiator Hose (Part No.CHR0279R)
from
$15.49
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Reduces installation time.
- No cutting, refitting or adjusting the hose.
- Prevents leaks and comebacks from reusing old quick connectors and o-rings.
- Resistant to heat, salt, road debris, oil and other contaminants.
Cohline – Vacuum Hose, 3.5mm x 9mm (Part No.B202012368COH)
from
$7.97
Vacuum Hose, 3.5mm x 9mm
Rein – Vacuum Hose (Part No.ABV0115P)
from
$4.99
Rein Automotive OE quality vacuum hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.
Product Features:
See More
Product Features:
- Matches original equipment design specifications.
- Manufactured with high quality materials.
- Direct fit for easy installation.
- Resistant to heat, salt, road debris, oil and other contaminants.
Cohline – Vacuum Hose, 1 Meter (Part No.B202070358COH)
Rein – Vacuum Hose (Part No.B202073183RIN)
from
$4.42
Vacuum Hose
CRP – Vacuum Hose (Part No.B202073221CRP)
from
$36.35
Vacuum Hose
ContiTech – Drive V-Belt (Part No.W100086367CON)
from
$12.68
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Polyester fiber tensile members and a ribbed belt design.
Gates – Automotive XL« High Capacity V-Belt (Part No.9440)
from
$23.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Dayco – Bottom Cog V-Belt; 37.5 Inch Long, Exact Fit Premium Quality (Part No.15375)
from
$16.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
ContiTech – Drive V-Belt (Part No.W100027630CON)
from
$13.69
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Polyester fiber tensile members and a ribbed belt design.
ACDelco – Professional High Capacity V-Belt (Part No.W1000578575ACD)
from
$37.90
ACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today’s most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive as they get hot. This results in improved belt performance by reducing tension, decay, and noise. These premium aftermarket replacement v-belts are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley
- Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned
- Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt
ContiTech – Drive V-Belt (Part No.W100033117CON)
from
$8.59
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Polyester fiber tensile members and a ribbed belt design.
Dayco – Bottom Cog V-Belt; 33.5 Inch Long, Exact Fit Premium Quality (Part No.17335)
from
$11.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
CRP – Fuel Hose (Part No.E5000859948CRP)
from
$110.20
Fuel Hose
CRP – HOSE – FUEL (Part No.4L30010815)
from
$278.59
HOSE – FUEL
Cohline – Fuel Hose, per Meter (Part No.E5000106278COH)
from
$8.76
Fuel Hose, per Meter
CRP – Hose – Fuel (Part No.4L30010809CRP)
from
$233.30
Hose – Fuel
Cohline – Fuel Hose (Part No.E500026582COH)
from
$47.92
Fuel Hose
CRP – Hose – Fuel (Part No.4L30010817CRP)
from
$486.90
Hose – Fuel
Cohline – FUEL HOSE (Part No.E500074190COH)
from
$57.28
FUEL HOSE
Popular 1968 Mercedes-Benz 300SEL Belts and Hoses Categories
1968 Mercedes-Benz 300SEL Belts and Hoses
You count on your 1968 Mercedes-Benz 300SEL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 17 Belts and Hoses ranging in price from $3.05 to $486.90, you’re sure to find everything you need for your 1968 Mercedes-Benz 300SEL.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 7 different brands like Gates, Rein, and CRP. 1968 Mercedes-Benz 300SEL Belts and Hoses start as low as $3.05!
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1968 Mercedes-Benz 300SEL below to get started!
FAQs for 1968 Mercedes-Benz 300SEL Belts and Hoses
What are the most purchased Belts and Hoses for the 1968 Mercedes-Benz 300SEL?
Out of 17 Belts and Hoses for the 1968 Mercedes-Benz 300SEL, the most popular in our inventory are:
