1968 Lincoln Mark III Drivetrains

Essential 1968 Lincoln Mark III Drivetrains

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Gear Install Kit (Part No.F9IKN)

Differential Gear Install Kit

from

$46.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)

Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford

from

$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.

Product Features:
  • Adapter washer
  • Fits Ford 9″
  • Adapts 28 spline pinion into 35 spline pinion support
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)

Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes

from

$22.99
Product Features:
  • Axle bearing retainer for Ford 9″
  • Fits large and small bearing applications
  • 3/8″ bolt holes
  • 3 9/16″ x 2″ bolt pattern
See More

Yukon Gear – 9" Ford Gasket (Part No.23012)

9" Ford Gasket

from

$11.99
9″ Ford gasket.

Product Features:
  • Dropout gasket
  • Fits Ford 9″
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Felpro – Differential Carrier Gasket (Part No.RDS 55074)

Differential Carrier Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Tapered Roller Bearing (Part No.S-25520)

Tapered Roller Bearing

from

$3.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

from

$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:
  • Axle stud for AMC Model 20 and Model 35
  • 1/2″ x 20 thread
  • 0.620″ knurl diameter
  • 1.625″ long
See More

Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)

Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing

from

$92.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.

Product Features:
  • Axle bearing
  • Fits Ford 9″
  • Conversion bearing to install small bearing axle into large bearing housing
  • 3.150″ O.D.
  • 1.377″ I.D.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Powertrax – Grip LOK Traction System (Part No.LK109031)

Grip LOK Traction System

from

$679.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Crush Sleeve (Part No.33085)

Crush Sleeve

from

$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:
  • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
  • 0.480″ tall
See More

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13045)

Pinion Install Kit For Ford Daytona 9" Differential

from

$284.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ with Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)

Fill Plug For Ford 9", 1/2" Thread

from

$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Fill plug
  • Fits Ford 9″
See More

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford

from

$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 9″
  • 3/8″ x 24 thread
  • 1.5″ long
See More

National – Multi Purpose Seal (Part No.7044NA)

Multi Purpose Seal

from

$15.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Motive Gear – Nodular Differential Housing (Part No.26325)

Nodular Differential Housing

from

$533.99


Product Features:
  • NODULAR HOUSING 9″ FORD 3.25″ BORE
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)

Ring Gear Bolt

from

$1.99


Product Features:
  • BOLT 9″ FORD OPEN R.G. SAME AS M-4216A200
See More

Yukon Gear – Grizzly Locker For Ford 9" Differential With 35 Spline Axles, Racing Design, For Load Bolt D/O (Part No.28030)

Grizzly Locker For Ford 9" Differential With 35 Spline Axles, Racing Design, For Load Bolt D/O

from

$1211.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. This is a race unit designed for extreme off road use or racing. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.

Product Features:
  • Fits Ford 9″ with 35 spline axles and loadbolt housing
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
  • Aggressive design for racing applications only
See More

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Trac Loc Clutch Guide For 9" Ford

from

$4.99
Trac Loc clutch guide for 9″ Ford.

Product Features:
  • Clutch guide
  • Fits Ford 8″ and 9″
See More

Popular 1968 Lincoln Mark III Drivetrains Categories

1968 Lincoln Mark III Drivetrains

You count on your 1968 Lincoln Mark III to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 332 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1968 Lincoln Mark III.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Moog, Driveworks, and National. 1968 Lincoln Mark III Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,370 extensive product reviews on 1968 Lincoln Mark III Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.0 stars and Universal Joint with 4.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1968 Lincoln Mark III below to get started!

Top-Rated Drivetrains Brands For Your 1968 Lincoln Mark III

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Lincoln Mark III running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, National, and even more.

Popular Felpro Drivetrains

You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1968 Lincoln Mark III back on the road. Some of the top-rated Felpro products in these categories are:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

FAQs for 1968 Lincoln Mark III Drivetrains

What are the most purchased Drivetrains for the 1968 Lincoln Mark III?

Out of 332 Drivetrains for the 1968 Lincoln Mark III, the most popular in our inventory are:
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints
Bearings
from $16.99
(25)
Bearings
Differential Bearings

What are the top-rated 1968 Lincoln Mark III Drivetrains?

Top-rated Drivetrains for your 1968 Lincoln Mark III based on customer reviews/ratings are:
Universal Joint
from $7.89
(11)
Universal Joint
“Fit good to make the install easy .”
Universal Joint
from $4.59
(10)
Universal Joint
“The part was a great mach. it fit real nice and I personally believe it may be better than the OE part because, It has the grease fitting which means ”
Bearings
from $15.99
(9)
Bearings
“as advertised”