1968 Jeep CJ5 Drivetrains

Product Features:

• Drive flange cap
• Fits Dana 44

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Improve The Performance
• Easy Installation

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1980-1983 CJ5, 1980-1986 CJ7, 1981-1986 CJ8, U-Bolt: U-Bolt Design (Pair, Per Yoke) (For 16580.02)
• 1976-1976 CJ7, U-Bolt (Quadratrac Transfer Case), (Use One Pair Per Yoke)
• 1972-1979 CJ5, 1972-1975 CJ6, 1976-1979 CJ7, U-Bolt For 16580.02 Yoke (Dana 20 Transfer Case), pair
• 1941-1969 CJ, 1972-1986 CJ, 1987-2010 Wrangler, 1984-2001 Cherokee, 1993-1998 Grand Cherokee, 2002-2007 Liberty, Dana 25/2730/44, AMC 20 Axle, Dana 20/300 and Quadratrac Transfer Case, U-bolt kit for Yoke part number 16580.02 Pair

Product Features:

• Seal housing for Dana Spicer 30 and AMC Model 35
• Includes o-rings

Is your Dana 18 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the Dana 18 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.

Product Features:

• OE Style
• Direct Fit
• Limited 5 Year Warranty

Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and fits 1999-2003 Dodge Dakota/Durango four wheel drive front, 1966-1970 Ford Bronco four wheel drive front, 1941-2003 Jeep CJ front, 1960-1974 IHC Scout front, and 1960-1967 IHC Scout rear differentials. Includes 10 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:

• 10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
• Bolts and gasket included
• Triple chrome plated for a lasting shine
• Precision engineered for a perfect fit

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

• Includes four quarts of Redline Shockproof oil

Product Features:

• MINI-INSTLTN KIT-DANA 30

Product Features:

• Cover gasket
• Fits Dana Spicer 30

Product Features:

• USA Standard Gear heavy-duty cross pin shaft
• Fits AMC Model 20
• Works with Spartan Locker or standard open spider gears

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

• All products are designed to meet or exceed OE quality, form, fit and funtion.

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
• GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
• KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

• Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
• 1/2″ head

Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.

Product Features:

• Set up bearing kit
• Fits Dana Spicer 30
• Easily slips on and off carrier journals to allow for easier carrier shim adjustment

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• OE Style
• Direct Fit
• Limited 5 Year Warranty

Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

Product Features:

• Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
• Effective fix – replacement restores proper connection between drive shaft and differential
• Rigorously tested – designed and evaluated to assure safe, reliable operation
• Trustworthy quality – backed by team of engineers and inspectors in the United States

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

• Fits standard rotation Dana Spicer 30
• Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.

Bearing race driver. No return.

Product Features:

• Bearing race driver
• Fits HM88610 race
• All steel construction

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Rear
• With Tapered Axles
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Rear
• Sold Individually
• OE Style
• Direct Fit
• Limited 5 Year Warranty

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008

Product Features:

• Fits Dana Spicer 30 with 27 spline axles
• Made from 9310 steel for added strength
• Replaces the spiders in a standard carrier case

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1941-1945 MB (Front & Rear), 1945-1945 Ford GPW (Front & Rear), 1945-1949 CJ2A, 1948-1953 CJ3A, 1953-1967 CJ3B, 1950-1952 M38, 1952-1971 M38A1, 1955-1966 CJ5, 1955-1966 CJ6, Spindle Nut Kit (Front), With Dana 25, Dana 27 & Dana 30

Is your Jeep differential cover leaking? Do you need to seal it up after some work? Omix-ADA has the OE quality differential gaskets you need.

Product Features:

• Rubber
• Sold Individually
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Is your Jeep differential cover leaking? Do you need to seal it up after some work? Omix-ADA has the OE quality differential gaskets you need.

Product Features:

• Rubber
• Sold Individually
• OE Style
• Direct Fit
• Limited 5 Year Warranty