1968 Ford Ranchero Drivetrains
More 1968 Ford Ranchero Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1968 Ford Ranchero, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1968 Ford Ranchero Drivetrains
Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)
from
$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.
Product Features:
See More
Product Features:
- Axle bearing
- Fits Ford 9″
- Conversion bearing to install small bearing axle into large bearing housing
- 3.150″ O.D.
- 1.377″ I.D.
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)
from
$45.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Neapco – Universal Joint (Part No.1-0025)
Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Product Features:
See More
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)
from
$63.99
1.250″ pinion adaptor sleeve (stock pinion into large support).
Product Features:
See More
Product Features:
- Adapter sleeve
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
Yukon Gear – Bearing Race Driver (Part No.56022)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M86610 race
- All steel construction
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)
from
$5.99
Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.
Product Features:
See More
Product Features:
- Pinion support bolt for Ford 9″
- 3/8″ x 24 thread
- 1.5″ long
Dorman – Help – Pinion Crush Sleeves (Part No.81056)
from
$5.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
- Required replacement – when servicing the differential
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Grizzly Locker For Ford 9" With 31 Spline Axles (Part No.28009)
from
$929.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 31 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Motive Gear – Differential Pinion Shaft (Part No.B7AZ4211A)
Powertrax – Lock Right Locker (Part No.1810-LR)
from
$339.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)
from
$3.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Nodular Differential Housing (Part No.26325)
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Silver Aluminum Pinion Supprt For 9" Ford Daytona (Part No.32037)
from
$303.99
Plain Silver aluminum pinion Supprt for 9″ Ford Daytona, HD 6061.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 28 spline pinion
- Larger inner pinion bearing reduces gear deflection under high load
- Races installed
- 6061 aluminum
Pro-King – Axle Seal (Part No.721A074)
from
$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Pinion Depth Shims For Ford 8" (Part No.55055)
Yukon Gear – Pinion Install Kit For Ford 8" Differential (Part No.13040)
from
$229.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 8″
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)
from
$24.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits large and small bearing applications
- 3/8″ bolt holes
- 3 9/16″ x 2″ bolt pattern
Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)
from
$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fill plug
- Fits Ford 9″
Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)
from
$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.
Product Features:
See More
Product Features:
- Side adjuster lock bolt
National – Multi Purpose Seal (Part No.410308)
from
$11.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Steel Spool For Ford 9" With 35 Spline Axles, Small Bearing (Part No.32098)
from
$449.99
Yukon Performance steel spool for 9″ Ford with 35 spline axles. Spool uses 1.785″ journal bearings. fits 2.8″ and 3.0″ cases. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 35 spline axles
- Small bearing journal to fit 2.968″ and 3.062″ dropouts
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)
from
$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.
Product Features:
See More
Product Features:
- Axle stud for AMC Model 20 and Model 35
- 1/2″ x 20 thread
- 0.620″ knurl diameter
- 1.625″ long
Yukon Gear – O-Ring For 9" Ford (Part No.30028)
from
$14.99
O-ring for 9″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion support o-ring
- Fits Ford 9″
Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)
from
$16.99
Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.
Product Features:
See More
Product Features:
- Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
- Fits standard open differentials only
- 0.750″ diameter
USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Long (Part No.17021)
from
$46.99
Product Features:
See More
- USA Standard Gear heavy-duty cross pin shaft
- Fits Ford 9″
- Works with Spartan Locker or standard open spider gears
- Long shaft
Popular 1968 Ford Ranchero Drivetrains Categories
1968 Ford Ranchero Drivetrains
You count on your 1968 Ford Ranchero to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 406 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1968 Ford Ranchero.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like DriveWorks, National, and Dorman. 1968 Ford Ranchero Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,961 extensive product reviews on 1968 Ford Ranchero Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 3.9 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1968 Ford Ranchero below to get started!
Top-Rated Drivetrains Brands For Your 1968 Ford Ranchero
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Ford Ranchero running right for years to come. In our inventory you’ll find brands like DriveWorks, National, Dorman, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1968 Ford Ranchero back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Driveworks Drivetrains
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Drivetrains for your 1968 Ford Ranchero, and some of our most reviewed Driveworks parts include:
FAQs for 1968 Ford Ranchero Drivetrains
What are the most purchased Drivetrains for the 1968 Ford Ranchero?
Out of 406 Drivetrains for the 1968 Ford Ranchero, the most popular in our inventory are:
What are the top-rated 1968 Ford Ranchero Drivetrains?
Top-rated Drivetrains for your 1968 Ford Ranchero based on customer reviews/ratings are:
from
$25.99
(8)
Greaseable Premium Universal Joint
“For front driveshaft on my 4wd 96 f250. Excellent fit just remember to install so that grease fitting is accessible. I installed mine twice. Would buy”
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
