1968 Ford Mustang Shocks and Struts

Essential 1968 Ford Mustang Shocks and Struts

KAI – Shock Tower Brace (Part No.GMK302133267)

Shock Tower Brace

from

$39.99
New Goodmark Painted Straight Monte Carlo Bar, Made Of Steel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Shock Tower Brace (Part No.GMK3020333641)

Shock Tower Brace

from

$54.99
New Goodmark Chrome Curved Monte Carlo Bar, Made Of Steel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Shock Tower Brace (Part No.GMK3020332641)

Shock Tower Brace

from

$44.99
New Goodmark Chrome Straight Monte Carlo Bar, Made Of Steel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5783)

OESpectrum Passenger Car Shock Absorber

from

$93.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

KYB – Excel-G Shock Absorber (Part No.L4000315815KYB)

Excel-G Shock Absorber

from

$84.04
The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions.

Product Features:
  • Direct fit application for ease of installation
  • Calibrated to compensate for worn suspensions
  • Components and valving are designed specifically for each application
  • The best choice to restore OE performance and normal driving conditions
  • Built with quality that matches or exceeds OE
  • Coverage for domestic and import cars, trucks, vans, minivans, and SUVs
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55845)

Gas-Matic Passenger Car Shock Absorber

from

$39.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

KYB – Gas Shock (Part No.343163)

Gas Shock

from

$30.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:
  • KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
  • The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Classic Ford Or Mercury
  • The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
  • Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
  • KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
See More

KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG5517)

High Pressure Monotube Gas Shock for Cars and Trucks

from

$82.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Your Vehicle
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55847)

Gas-Matic Passenger Car Shock Absorber

from

$39.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

KAI – Strut Mount Cap (Part No.GMK302136067C)

Strut Mount Cap

from

$39.99
New Goodmark Driver Or Passenger Side Chrome Shock Tower Cap, 2 Required

Product Features:
  • 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Strut Mount Cap (Part No.GMK302136067)

Strut Mount Cap

from

$36.99
New Goodmark Driver Or Passenger Side Painted Shock Tower Cap, 2 Required

Product Features:
  • 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Strut Mount Cap (Part No.GMK302036064)

Strut Mount Cap

from

$33.99
New Goodmark Black Shock Tower Cap, 2 Required

Product Features:
  • 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG4504)

High Pressure Monotube Gas Shock

from

$58.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Mustangs And Cougars
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Motorcraft – Strut Assembly (Part No.L30001348485MTR)

Strut Assembly

from

$218.58
Strut Assembly

Suncore – Complete Strut Assem (Part No.55S11950)

Complete Strut Assem

from

$124.99
Complete Strut Assem

Lakewood – Drag Shock-90/10:AMC/Ford (Part No.40103)

Drag Shock-90/10:AMC/Ford

from

$85.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172138)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$256.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Monroe – OESpectrum Strut (Part No.72540)

OESpectrum Strut

from

$156.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Lakewood – Street/Strip Strut-Mustang (Part No.40501)

Street/Strip Strut-Mustang

from

$212.99
Street/Strip Strut-Mustang

Lakewood – 90/10 Drag Strut 94Up Mustang (Part No.40516)

90/10 Drag Strut 94Up Mustang

from

$224.99
Features precision speed sensing valving. Easier to control at the end of the track.

Product Features:
  • For Maximum Traction At The Rear Wheels
  • Designed To Respond Similar To The Shocks
See More

Whiteline – Spring To Saddle Insulator Bushing (Part No.W71413)

Spring To Saddle Insulator Bushing

from

$78.99
A critical service item for any leaf sprung vehicle. High kilometres and heavy load carrying causes excessive wear on rubber bushings. Whiteline’s signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD’s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Product Features:
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Whiteline – Shock Absorber Lower Bushing (Part No.W31409)

Shock Absorber Lower Bushing

from

$25.99
Shock absorber advances and demands for improved travel and load bearing has placed extra importance and stress on shock absorber bushings. Whiteline’s superior formulation shock bushings enhance the performance of new and used shock absorbers.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
See More

Whiteline – Shock Absorber Upper Bushing (Part No.W31408)

Shock Absorber Upper Bushing

from

$22.99
Shock absorber advances and demands for improved travel and load bearing has placed extra importance and stress on shock absorber bushings. Whiteline’s superior formulation shock bushings enhance the performance of new and used shock absorbers.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
See More

1968 Ford Mustang Shocks and Struts

Maybe you’re in the middle of a full rebuild of that 1968 Ford Mustang. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 11 different Shocks and Struts in our inventory ranging from $22.99 to $93.99. That means you can find the exact parts or products you need to keep that 1968 Ford Mustang running smoothly.

Shocks and Struts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1968 Ford Mustang. Monroe, KYB, and Whiteline are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Shocks and Struts for your 1968 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Shocks and Struts to keep your 1968 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Shocks and Struts Brands To Make Your 1968 Ford Mustang Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1968 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.

FAQs for 1968 Ford Mustang Shocks and Struts

What are the most purchased Shocks and Struts for the 1968 Ford Mustang?

Out of 11 Shocks and Struts for the 1968 Ford Mustang, the most popular in our inventory are:
High Pressure Monotube Gas Shock for Cars and Trucks
from $82.99
This product is not rated
High Pressure Monotube Gas Shock for Cars and Trucks
Rear Shock and Struts
Gas Shock
from $44.99
This product is not rated
Gas Shock
Rear Shock and Struts
High Pressure Monotube Gas Shock
from $93.99
This product is not rated
High Pressure Monotube Gas Shock
Front Shock and Struts