1968 Ford GT40 Ignition and Tune-Up Products
Find Your Specific 1968 Ford GT40 Ignition and Tune-Up Products
Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 1968 GT40. Advance Auto Parts has popular GT40 parts like Ignition Coils and Boots, Spark Plugs, Distributors and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other GT40 model years including
1964,
1965,
1966,
1967,
1969 and more. Select a category of 1968 Ford GT40 Ignition and Tune-Up Products below and start saving instantly.
Popular 1968 Ford GT40 Ignition and Tune-Up Products Categories
Essential Ignition and Tune-Up Products for 1968 Ford GT40s
Carquest Premium – Ignition Contact Set (Part No.AKA1001)
from
$15.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Contact Set (Points) (Part No.A101V)
from
$16.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
- External core made from oriented silicon steel ensures durability and longevity
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Felpro – Multi-Purpose O-Ring (Part No.5511)
from
$4.29
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Ignition Distributor Shaft Seal (Part No.13069)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Carquest Premium – Ignition Conversion Kit (Part No.CBA1704)
from
$369.99
The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1703)
from
$389.99
The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)
from
$10.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Champion – Copper Plus Spark Plug (RF11YC): Dependable Performance & Durability (Part No.22)
from
$3.99
Copper Plus spark plug delivers reliable performance and durability, making it an excellent choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, it ensures precise heat range control for extended lifespan and consistent functionality. The nickel-tipped center and ground electrodes enhance conductivity while resisting corrosion, ensuring dependable ignition in various conditions. Designed to meet ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with standard replacement needs. Its tapered seat type and built-in resistor further contribute to optimal operation, making it a practical and value-driven solution for your engine’s ignition system.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance.
- Copper core center electrode allows for accurate control of heat range for longer life
- Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
- Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
- Built to ISO and SAE standards for proven performance
Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP45)
from
$5.99
The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, providing unmatched durability under high temperatures and pressure. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a long projection center electrode and tapered seat type, this performance-grade spark plug is built to handle demanding conditions. Both the center and ground electrode tips are crafted from platinum, ensuring consistent ignition and enhanced efficiency. Designed to deliver superior functionality and durability, this spark plug is an excellent investment for maintaining peak engine performance.
Product Features:
See More
Product Features:
- Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
- The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
- Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
- The multi-rib insulator prevents flash-over.
- Designed with a tapered seat type and long projection center electrode to ensure reliable performance under demanding conditions.
MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)
from
$52.99
All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!
Product Features:
See More
Product Features:
- Supplied w/Heavy Duty Rotor
- Low Resistance Terminals
- Full Power Output At High RPM
- Perfect For Budget Minded Enthusiasts
Carquest – Distributor Cap (Part No.24C1021)
from
$13.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Ignition Tune-Up Kit (Part No.CBA1835)
from
$18.99
The Ignition Tune-Up Kit provides the needed parts required to return the ignition system primary circuit to its original operating condition.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8335)
from
$36.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
MSD Ignition – Distributors (Part No.83523)
from
$777.99
Distributors
MSD Ignition – Distributor (Part No.83795)
from
$449.99
Distributor
MSD Ignition – Distributors (Part No.83525)
from
$749.99
Distributors
Carquest Premium – Distributor Rotor (Part No.DAA1002)
from
$5.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Driveworks – Distributor Rotor (Part No.23050)
from
$4.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest – Distributor Rotor (Part No.23A1015)
from
$4.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Rotor (Part No.D198)
from
$9.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.
Product Features:
See More
Product Features:
- High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
- The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)
from
$41.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)
from
$46.99
Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.
Product Features:
See More
Product Features:
- output of 42000V
ACDelco – Ignition Coil (Part No.U505)
from
$79.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)
from
$43.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)
from
$46.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Upgrade your 1968 Ford GT40 with Top-Quality Ignition and Tune-Up Products
When it comes to maintaining or upgrading your 1968 Ford GT40, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your GT40 functioning at its best. At Advance Auto Parts, we offer a wide selection of 48 Ignition and Tune-Up Products for the 1968 Ford GT40, designed to meet your needs without breaking the bank.
From
Ignition Coils and Boot
replacements to
Spark Plugs
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1968 Ford GT40 at great prices.
Our Ignition and Tune-Up Products inventory for this model
ranges from just $2.79 to $777.99, with
an average price of $98.17.
Our 48 Ignition and Tune-Up Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1968 Ford GT40 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Ford GT40, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names
like Autolite, Carquest, Dorman, and more.
Autolite Ignition and Tune-Up Products
start at just $4.29 and boast an impressive 4.6 stars average rating from customers.
Carquest and Dorman also bring quality to the table, with Ignition and Tune-Up Products available starting at $7.59, and at an average 4.4 stars rating.
With 268 customer reviews and counting, our 1968 Ford GT40 Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1968 Ford GT40 is always ready to roll. We’re committed to providing you with everything you need to keep your GT40 in top shape, all in one place.
Start shopping confidently below for your 1968 Ford GT40!
Best-Selling Ignition Coils and Boots for 1968 Ford GT40s
Enhance the driving experience in your Ford with 5 quality Ignition Coils and Boot components, starting at $36.99.
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8335)
from
$36.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)
from
$43.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)
from
$41.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
ACDelco – Ignition Coil (Part No.U505)
from
$79.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)
from
$46.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Most Popular 1968 Ford GT40 Spark Plugs
Customize your Ford with 14 Spark Plugs products
like Spark Plugs and
Spark Plug Non-Foulers, all
priced under $10.99.
Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.45)
from
$4.29
Autolite Copper spark plugs are expertly crafted to ensure quick starts and reliable performance for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes deliver extended life and durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, providing superior strength under demanding conditions. Designed with a corrosion-resistant nickel-plated shell, these spark plugs offer long-lasting durability. The tapered seat type and long projection center electrode design further optimize functionality, while the resistor ensures consistent performance. Engineered for good fuel economy, these spark plugs help you save on fuel costs without compromising on power or efficiency. With a standard-grade type and nickel tip materials, Autolite Copper spark plugs are a dependable choice for maintaining peak engine performance.
Product Features:
See More
Product Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Good Fuel Economy: Engineered to optimize fuel efficiency, helping you save on fuel costs.
Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP45)
from
$4.99
Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, and enhanced acceleration while improving fuel efficiency. The platinum firing tip prevents gap erosion, extending the service life, while the high alumina ceramic insulator offers excellent thermal conductivity and insulation for added strength. A multi-rib insulator design prevents flash-over, and the nickel-plated shell resists corrosion for long-lasting reliability. With a tapered seat type, these spark plugs deliver enhanced performance and durability. Designed with a long projection center electrode and a nickel ground electrode tip, they are built for performance-grade applications. Whether you’re seeking improved engine efficiency or extended durability, these spark plugs are a dependable choice for maintaining optimal engine functionality.
Product Features:
See More
Product Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Tapered Seat Type: Enhances overall performance and durability.
Motorcraft – Standard Spark Plug (BSF42C): Reliable Performance & Durability (Part No.SP-420-A)
from
$4.99
Standard Spark Plug (BSF42C) delivers reliable performance and durability, making it the ideal choice for maintaining your vehicle’s original equipment standards. Engineered specifically for Ford, Lincoln, and Mercury vehicles, these spark plugs ensure an exact fit while enhancing durability, reducing misfires, optimizing emissions, and improving fuel efficiency. Built with high-quality materials, they resist oxidation and arc erosion, ensuring long-lasting performance with service intervals of up to 100,000 miles. The multi-rib insulator design protects against misfires, while Motorcraft ignition components help prevent false check engine lights, giving you confidence in your vehicle’s operation. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are the same trusted components found in your vehicle at the time of manufacture, offering reliable performance for a wide range of domestic and import cars and trucks. Whether you’re maintaining your Ford or upgrading another vehicle, these spark plugs deliver the durability and reliability you need.
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
Dorman – Help – Spark Plug Non-Foulers – 18mm Tapered Seat (Part No.42002)
from
$10.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
E3 – DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency (Part No.E3.72)
from
$8.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.72 is an 18mm, 0.430 reach plug with a taper seat. It primarily fits Ford applications from the 50s to 90s. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.
Product Features:
See More
Product Features:
- E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
- Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
- Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
- Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
- E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
- The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
- Patented Electrode Configuration: The unique patented electrode design of the E3.72 spark plugs increases combustion pressure, resulting in higher power output and improved fuel economy.
- Enhanced Heat Transfer: The three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer, contributing to better engine performance and longevity.
- Reduced Emissions: The E3.72 spark plugs help improve hydrocarbon emissions, making your vehicle more environmentally friendly over long-term use.
- Compatibility with Ford Engines: Specifically designed to fit Ford applications from the 50s to the 90s, the 18mm, 0.430 reach plug with a taper seat ensures a perfect fit for a wide range of classic and vintage Ford vehicles.
Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)
from
$7.59
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Champion – Copper Plus Spark Plug (RF11YC): Dependable Performance & Durability (Part No.22)
from
$3.99
Copper Plus spark plug delivers reliable performance and durability, making it an excellent choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, it ensures precise heat range control for extended lifespan and consistent functionality. The nickel-tipped center and ground electrodes enhance conductivity while resisting corrosion, ensuring dependable ignition in various conditions. Designed to meet ISO and SAE Standards, this spark plug guarantees proven performance and compatibility with standard replacement needs. Its tapered seat type and built-in resistor further contribute to optimal operation, making it a practical and value-driven solution for your engine’s ignition system.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance.
- Copper core center electrode allows for accurate control of heat range for longer life
- Patented TinTac and ULTRASEAL coated shell for maximum corrosion resistance
- Patented SAC-9 semiconductor resistor for maximum EMI & RFI suppression
- Built to ISO and SAE standards for proven performance
ACDelco – Conventional Copper Core Spark Plug: Reliable Performance (Part No.R83TS)
from
$3.99
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Black Onyx coating helps reduce corrosion
- Copper core provides great heat transfer and helps maximize plug durability
- Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
- Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
- Available for use in Marine applications
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Nickel Alloy Electrode Tip: Designed with a nickel alloy center electrode tip, these spark plugs provide enhanced durability and consistent performance.
- Outstanding Suppression Characteristics: These spark plugs offer excellent suppression characteristics, contributing to the overall reliability and efficiency of your vehicle’s engine.
Motorcraft – Spark Plug: Quick Starts & Enhanced Fuel Economy (Part No.SP-420)
from
$2.79
The Spark Plug: Quick Starts & Enhanced Fuel Economy by Motorcraft is the same high-quality part installed when your engine first rolled off the assembly line, ensuring a perfect fit and reliable performance. Designed and recommended by Ford Motor Company, these spark plugs are engineered to deliver quick starts, improved fuel economy, and smooth acceleration, making them an essential component for maintaining your vehicle’s peak performance. Featuring a tapered seat type, they provide a secure and precise fit, reducing the risk of leaks or misfires. Built to meet the highest standards of durability and efficiency, these spark plugs offer exceptional value by enhancing your engine’s performance and longevity. Whether you’re replacing worn-out plugs or performing routine maintenance, trust Motorcraft to keep your vehicle running smoothly.
Product Features:
See More
Product Features:
- Same part installed when the engine rolled off the assembly line
- Designed to deliver quick starts, enhanced fuel economy and smooth acceleration
- Engineered for a secure and precise fit with a tapered seat type, minimizing the risk of leaks or misfires.
- Built to meet high durability standards, ensuring long-lasting performance and reliability.
- Enhances engine longevity by maintaining optimal performance and efficiency.
Motorcraft – Double Platinum Spark Plug: Enhances Durability & Reduces Misfires (Part No.SP-459)
from
$5.49
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. With a platinum center and ground electrode tip, they are resistant to oxidation and arc erosion, ensuring long-lasting performance. The multi-rib insulator protects against misfires, and they are designed to fit Ford, Lincoln, and Mercury vehicles exactly. Backed by Motorcraft’s Service Parts Warranty, these spark plugs offer service intervals of up to 100,000 miles and help prevent false check engine lights. Made with high-quality materials, Motorcraft Spark Plugs deliver reliable performance for almost any application, making them the same trusted components that were in your vehicle when it was manufactured.
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
- Enhanced Durability: Engineered with a platinum center and ground electrode tip, these spark plugs are resistant to oxidation and arc erosion, ensuring long-lasting performance.
- Fuel Efficiency and Emissions: Designed to reduce fuel consumption and optimize emissions, contributing to a more efficient and environmentally friendly driving experience.
Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP45)
from
$5.99
The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, providing unmatched durability under high temperatures and pressure. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a long projection center electrode and tapered seat type, this performance-grade spark plug is built to handle demanding conditions. Both the center and ground electrode tips are crafted from platinum, ensuring consistent ignition and enhanced efficiency. Designed to deliver superior functionality and durability, this spark plug is an excellent investment for maintaining peak engine performance.
Product Features:
See More
Product Features:
- Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
- The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
- Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
- The multi-rib insulator prevents flash-over.
- Designed with a tapered seat type and long projection center electrode to ensure reliable performance under demanding conditions.
Motorcraft – Spark Plug: Enhanced Durability & Reliable Performance (Part No.SP-459-X)
from
$9.99
Motorcraft Spark Plugs are engineered to deliver exceptional performance and reliability, making them the ideal choice for Ford, Lincoln, and Mercury vehicles. Designed with a fine wire platinum center electrode and nickel ground electrode tip, these spark plugs ensure precise ignition while resisting oxidation and arc erosion for long-lasting durability. The multi-rib insulator minimizes misfires, optimizing fuel efficiency and emissions, while service intervals of up to 100,000 miles provide peace of mind and reduced maintenance costs. As original equipment, they match specific engines to eliminate misfires and prevent false check engine lights, ensuring your vehicle runs smoothly. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are crafted from high-quality materials to meet strict Ford engineering standards, offering reliable performance for a wide range of domestic and import applications. Whether you’re maintaining your vehicle or restoring it to factory condition, Motorcraft Spark Plugs deliver the confidence and dependability you need.
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
Motorcraft – Platinum Spark Plug: Fine Wire Design for Enhanced Ignition (Part No.SP-549-X)
from
$7.29
The Platinum Spark Plug with a fine wire center electrode design is engineered for superior ignition performance and efficiency. Featuring a platinum center electrode tip, it ensures excellent conductivity and long-lasting durability, making it a reliable choice for consistent engine starts and smooth operation. The nickel ground electrode tip complements the design, providing robust performance under various driving conditions. Its tapered seat type ensures a secure fit, reducing the risk of gas leakage and enhancing overall engine efficiency. This spark plug is an ideal upgrade for those seeking improved fuel combustion, reduced emissions, and extended service life, delivering exceptional value and reliability for your vehicle.
Product Features:
See More
Product Features:
- Fine wire center electrode design enhances ignition performance and fuel combustion efficiency.
- Platinum center electrode tip ensures excellent conductivity and long-lasting durability.
- Nickel ground electrode tip provides robust performance under various driving conditions.
- Tapered seat type ensures a secure fit, reducing gas leakage and improving engine efficiency.
- Engineered for consistent engine starts, smooth operation, and extended service life.
Motorcraft – High-Performance Spark Plug: Enhances Fuel Efficiency (Part No.SP-420-X)
from
$4.99
This high-performance spark plug is meticulously crafted to elevate your engine’s efficiency and reliability. Featuring a standard center electrode design with durable nickel tips for both the center and ground electrodes, it ensures consistent and dependable ignition. Its advanced engineering optimizes combustion, leading to smoother engine performance, improved fuel efficiency, and reduced emissions – perfect for eco-conscious drivers. The tapered seat type enhances its fit and functionality, making it suitable for a wide range of vehicles. Built with precision manufacturing and long-lasting materials, this spark plug is ideal for both daily commutes and high-performance driving, offering exceptional value and durability for your vehicle’s needs.
Product Features:
See More
Product Features:
- Optimizes Engine Performance: Engineered to enhance your engine’s performance, ensuring a smoother and more efficient combustion process.
- Boosts Fuel Efficiency: Significantly improves fuel efficiency, helping you save on fuel costs and reduce your carbon footprint.
- Reduces Emissions: Designed with advanced materials to minimize emissions, contributing to a cleaner environment.
- Reliable Ignition: Offers consistent and dependable ignition, ideal for both everyday driving and high-performance applications.
- Long-Lasting Durability: Built to last with precision manufacturing, providing long-term reliability and performance for your vehicle.
- Optimizes Engine Performance: Engineered to enhance your engine’s performance, ensuring a smoother and more efficient combustion process.
- Boosts Fuel Efficiency: Significantly improves fuel efficiency, helping you save on fuel costs and reduce your carbon footprint.
- Reduces Emissions: Designed with advanced materials to minimize emissions, contributing to a cleaner environment.
- Reliable Ignition: Offers consistent and dependable ignition, ideal for both everyday driving and high-performance applications.
- Long-Lasting Durability: Built to last with precision manufacturing, providing long-term reliability and performance for your vehicle.
Top Picks for 1968 Ford GT40 Distributors
Upgrade Ford GT40s with top-quality Distributors parts, including 20 OEM and aftermarket selections for your 1968 model.
Carquest – Distributor Rotor (Part No.D198)
from
$9.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.
Product Features:
See More
Product Features:
- High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
- The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Carquest Premium – Distributor T2809: 100% New, With Cap and Rotor (Part No.T2809)
from
$92.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
Felpro – Multi-Purpose O-Ring (Part No.5511)
from
$4.29
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Distributor Rotor (Part No.DAA1002)
from
$5.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor Cap (Part No.CAC1056)
from
$16.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)
from
$52.99
All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!
Product Features:
See More
Product Features:
- Supplied w/Heavy Duty Rotor
- Low Resistance Terminals
- Full Power Output At High RPM
- Perfect For Budget Minded Enthusiasts
Driveworks – Distributor Rotor (Part No.23050)
from
$4.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest – Distributor Cap (Part No.24C1021)
from
$13.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest – Distributor Rotor (Part No.23A1015)
from
$4.99
The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
- Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
- Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
- Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.
Carquest Premium – Distributor T2807: 100% New, With Cap and Rotor (Part No.T2807)
from
$140.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
Felpro – Ignition Distributor Shaft Seal (Part No.13069)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
MSD Ignition – Distributors (Part No.83523)
from
$777.99
Distributors
MSD Ignition – Distributors (Part No.83525)
from
$749.99
Distributors
MSD Ignition – Distributors (Part No.85795)
from
$549.99
Distributors
MSD Ignition – Distributor; Ford FE (Part No.8594)
from
$499.99
Racers and nostalgic Ford enthusiasts using the famous Ford FE engine now have access to a distributor that is truly equal to the performance level of their engine. A magnetic pick-up triggers your MSD Ignition control accurately at any RPM. Above this pick-up the mechanical advance assembly is positioned so it can be adjusted without disassembling the distributor. In addition, the specially ground advance cam is Tig-welded to the 9/16 In. hardened shaft and the weight pins are staked and Tig-welded to the advance plate.
Product Features:
See More
Product Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Will not accept a vacuum advance or MSD Cap-A-Dapt
- Supplied w/An HEI Style Distributor Cap And Rotor
- Must Be Used w/An MSD Ignition Control
- Mech. advance assem. can be locked out for crank trigger systems
- Nylon pads ensure smooth operation of the advance weights
Edelbrock – Max-Fire Distributor for Ford 332-428 FE (Part No.22757)
from
$487.99
Edelbrock part No. 22757 Max-Fire distributor for Ford 332-428 V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They’re ideal for replacing or upgrading from a points triggered distributor. They feature precision machining for a perfect fit along with a simple three wire hook up for an easy installation with no need to run an external ignition control box. The centerless ground shaft utilizes an upper sealed roller bearing with an extra long lower bronze Oil-Lite bushing for smooth operation. The high output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you’re getting maximum performance from your engine. We recommend a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM’s. Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. FEATURES AND BENEFITS: – CNC machined from 6061-T6 aluminum with O-ring grooves for use in a fully machined engine block – Cap and rotor are molded in high quality 30% glass filled polyester for durability and carbon tracking resistance – Features brass contacts and a stainless steel rotor spring for maximum conductivity – Hardened iron drive gear ensures long service life – Fully adjustable mechanical and vacuum advance for increased mileage potential
See More
MSD Ignition – Distributor (Part No.83795)
from
$449.99
Distributor
MSD Ignition – Distributor; Ford 289/302; Crank Trigger (Part No.8379)
from
$449.99
Blue oval racers will be happy to see these Crank Trigger Distributors. The housing of these three distributors are standard-height Ford Distributors so they will work with cast intake manifolds. These distributors have a low-profile cap assembly to clear busy intake set-ups and are topped with MSDs new Rynite-molded Ford-style cap and wire retainer. The low design is accomplished because the only thing under the cap is a rotor! These distributors dont have an advance assembly or pick-up so they must be used with a Crank Trigger. Since these distributors are designed for racing applications, a ball bearing is pressed into the housing to guide the polished steel shaft. Each distributor is supplied with a bronze gear.
Product Features:
See More
Product Features:
- Must Be Used w/MSD Crank Trigger/MSD Ignition Control
- Shaft Is Guided By Sealed Ball Bearing
- For Long Life and High RPM Stability
- Polished Steel Shaft w/QPQ Coating For Friction Reduction
- Supplied w/Bronze Gear For Race Cam Applications
- Large Diameter Cap To Prevent Spark Scatter
Edelbrock – Distributor Drive Gear No. 22735 for SBF Pro-Flo and Max-Fire Distributors (Part No.22735)
Edelbrock – Distributor Drive Gear No. 22736 For SB Ford 289-302 With 0.467" Diameter Shaft (Part No.22736)
from
$34.99
Edelbrock Part No. 22736 is a steel drive gear for use on part No. 22755 Max-Fire Distributor, in Small-Block Ford 289-302 engines that are running a hydraulic roller camshaft with a billet steel core. This steel distributor drive gear is designed specifically for our small-block Ford Max-Fire Ready-to-Run distributor with 0.467″ diameter shaft and 1/4″ hex oil pump drive. This drive gear has an overall diameter of 1-1/4″ (1.249″) and is an optional replacement part for the iron (orange dot) gear that comes installed with part No. 22755 kit. Features a white paint dot for identification.
See More
In-Demand Ignition Wires for 1968 Ford GT40s
Select from 2 premium Ignition Wires parts for your 1968 Ford GT40, with prices ranging from $133.99 to $153.99.
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Most Sold 1968 Ford GT40 Ignition Kits
Explore our best-selling Ford parts for the 1968 GT40 among 7 OEM and aftermarket options starting from $13.49.
Carquest – Contact Set (Points) (Part No.A101V)
from
$16.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
- External core made from oriented silicon steel ensures durability and longevity
Carquest Premium – Ignition Contact Set (Part No.AKA1001)
from
$15.99
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Contact Set (Part No.AKA1008)
from
$13.49
The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1703)
from
$389.99
The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1704)
from
$369.99
The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1062)
from
$204.99
The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Carquest Premium – Ignition Tune-Up Kit (Part No.CBA1835)
from
$18.99
The Ignition Tune-Up Kit provides the needed parts required to return the ignition system primary circuit to its original operating condition.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Top-Rated Ignition and Tune-Up Products Brands For Your 1968 Ford GT40
Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1968 Ford GT40s. Below you’ll find some of our best rated Ignition and Tune-Up Products from Autolite, Carquest, and Dorman, and more. Ignition and Tune-Up Products from these brands that fit a 1968 GT40 start at just $4.29 and are rated as high as 4.6 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Autolite 1968 Ford GT40 Ignition and Tune-Up Products
When it comes to maintaining or upgrading your 1968 Ford GT40, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Autolite ticks all of those boxes. We offer a wide selection of Autolite Ignition and Tune-Up Products, specifically designed for the 1968 Ford GT40. With over 2 Autolite brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.29, with an average price of just $4.64. Plus, with over 41 customer reviews and an average rating of 4.6 stars, you can trust that our Autolite Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$4.99
(23)
Platinum Spark Plug: Enhanced Durability & Improved Performance
“Used on a 1965 Mustang. Quality product.”
Popular Carquest 1968 Ford GT40 Ignition and Tune-Up Products
Carquest auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1968 Ford GT40 owner should feel confident when installing genuine Carquest parts in their vehicle. To ensure the best fit and performance for your 1968 GT40, Advance Auto Parts carries a full inventory of 2 Carquest Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Ignition and Tune-Up Products range from $9.99 to $16.05, plus, with more than 14 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.
FAQs for 1968 Ford GT40 Ignition and Tune-Up Products
Which Ignition and Tune-Up Products are best-sellers for 1968 Ford GT40s?
Out of 48 Ignition and Tune-Up Products that fit 1968 Ford GT40s, the following parts are the top sellers:
- Standard Spark Plug (BSF42C): Reliable Performance & Durability (11822525) – $4.99
- Double Platinum Spark Plug: Enhances Durability & Reduces Misfires (18090043) – $5.49
- Spark Plug Non-Foulers – 18mm Tapered Seat (5014964) – $10.99
What’s the price range for 1968 Ford GT40 Ignition and Tune-Up Products?
Ignition and Tune-Up Product prices for the 1968 Ford GT40 start at $2.79 and go up to $777.99 for the most premium parts.
What’s the average price of a Ignition and Tune-Up Product for a 1968 Ford GT40?
The average price for Ignition and Tune-Up Products for the 1968 Ford GT40 is $98.17. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford GT40 model years?
What are the cheapest Ignition and Tune-Up Products for my 1968 Ford GT40?
The cheapest 1968 Ford GT40 Ignition and Tune-Up Products we carry in stock are:
- Spark Plug: Quick Starts & Enhanced Fuel Economy (18090013) – $2.79
- Conventional Copper Core Spark Plug: Reliable Performance (5392675) – $3.99
- Copper Plus Spark Plug (RF11YC): Dependable Performance & Durability (89011701) – $3.99
- Ignition Distributor Shaft Seal (3204472) – $3.99
- Distributor Rotor (11440037) – $4.05
What are the top-rated Ignition and Tune-Up Products that fit the 1968 Ford GT40?
Out of 268 reviews by customers, our 1968 Ford GT40 Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1968 Ford GT40 and their top-rated products:
- Ignition Wires
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
- Spark Plugs
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
- Ignition Coils and Boots
- Mallory Prosidewinder 135F Univ/Wire Set (17370010) – $153.99
- Mallory Prosidewinder 90F Univ. Wire Set (17350051) – $133.99
What types of Ignition and Tune-Up Products do you sell for my 1968 Ford GT40?
As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1968 Ford GT40:
Can I get help with 1968 Ford GT40 Ignition and Tune-Up Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.
What is your return policy for Ford GT40 Ignition and Tune-Up Products?
Advance Auto Parts keeps returns simple. For new Ford GT40 Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
