1968 Ford GT40 Valve Cover and Cylinder Heads

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Edelbrock part No: 7313 head gasket is intended for Small Block Ford Performer and RPM Heads. This gasket comes as a set and if for small block Ford engines from 1962-1991, 260-289-302 (5.0L except boss) and 351W engines except SVO. This has a 4.100 bore size, .038 compressed thickness and 8.22 cc volume.

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Edelbrock Pushrod Ford Fe 390-427 Hyd. Flat Tappet Cams, O.D. 3/8 In., L 9.335 In., 9613.

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

“Edelbrock RPM Small-Block Ford 2.02″” Cylinder Head Hydraulic Roller Camshaft, 60255. ”

The Edelbrock #60259 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60259 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Edelbrock Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft, 5027.

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

The Edelbrock No: 7364 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.

Affordable, top quality. 500+ HP potential. High-flow 210cc intake ports. CNC gasket-matched part entries and exits.

The Edelbrock #60229 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60229 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219.

The Edelbrock No. 9711 Intake Valve Seat set is a replacement for Edelbrock cylinder heads.

Holley Fabricated aluminum tall valve cover short bolt pair silver Ford 1958-76 332-4, 890001.

“Sniper’s fabricated aluminum valve covers gives you an excellent way to add a high-end fabricated look without the high-end price. They offer you a lightweight and tough valve cover for your favorite street, off-road, or racing machine. These valve covers are constructed of 6061 T5 sheet aluminum, precision TIG welded for a proper fit, and feature a laser etched “”Sniper”” logo on top. They are available in silver anodized or black coated finishes along with various heights to clear most popular rocker arm combinations. All of our valve covers include mounting hardware for quick and simple installation.”

“The Edelbrock No. 4277 Elite II Valve Covers are designed for Ford FE 1958-1976 applications. This new line of Elite II valve covers feature a design that is influenced by the original Elite Series originally released in 1985, but with a new modern take on this classic look. They’re made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Our tall profile valve covers are 2″” taller than stock, and clear most roller rockers and valvetrain components. Our low profile valve covers clear all air-conditioning, alternator brackets and aluminum rockers. Overall height is measured from gasket flange to top at the highest point.”

Edelbrock part No: 41609 Classic Series Valve Covers are designed for Ford 221-351W V8 1962-95 applications and have a Satin finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.

Holley Fabricated aluminum tall valve cover short bolt pair black Ford 1958-76 332-42, 890001B.

The Edelbrock No: 4460 Signature Series Valve Covers are designed for Ford 260-289-302 (not Boss) and 351W V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.