1968 Ford Galaxie Performance and Racing Products
Find Your Specific 1968 Ford Galaxie Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1968 Galaxie. Advance Auto Parts has popular Galaxie parts like Performance Ignition Products, Performance Exhaust Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Galaxie model years including
1965,
1966,
1967,
1969,
1970,
1971,
1972,
1973,
1974 and more. Select a category of 1968 Ford Galaxie Performance and Racing Products below and start saving instantly.
Popular 1968 Ford Galaxie Performance and Racing Products Categories
Essential Performance and Racing Products for 1968 Ford Galaxies
Edelbrock – Performer-Plus camshaft for Ford 351M-400 V-8 (Part No.2172)
from
$363.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
B & M – Transpak, 67-91 C6 Transmission (Part No.40228)
from
$178.99
Use the B&M Transpak to recalibrate your automatic transmission for optimum performance. With the Transpak you will be able to downshift into low at any speed, and keep it in low to any speed that you want.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)
from
$60.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- For use with SVO square port cylinder heads
- Easy Removal For Disassembly
Hooker Headers – Super Comp. Header (Part No.6130-1HKR)
from
$1500.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Competition Cams – Valve Seals, Umbrella 11/32" 1 St (Part No.502-16)
from
$230.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with stock guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
B & M – Automatic Shifter, Pro Stick Shift with CVR (Part No.80706)
from
$483.99
The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H
Product Features:
See More
Product Features:
- All One-Handed
- Reverse Lockout Meets NHRA And IHRA Requirements
- Mount Directly To Floor/Chassis/Or w/Quick Release
- Ultimate For Powerglide Applications
- Lightweight Brushed Alum. Cover
- Cover Removed Quickly and Easily
- Includes 5 Ft. Super Duty Race Cable
- Quick Change Plate Design
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Richmond Gear – Differential Ring And Pinion (Part No.69-0069-1)
from
$360.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Accel – Contact And Condenser Kit (Part No.8203)
from
$89.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mallory – Distributor Wiring Harness (Part No.29349)
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)
from
$113.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Put And End To High Maintenance Point Ignitions
- Specialized Electronic Circuitry
- Stabalizes Ignition Timing From 1 To 10000 RPM
- Improves Performance And Fuel Efficiency
- Easy To Install With Hand Tools
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Hays – Flywheels (Part No.12-535)
from
$511.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.35-414-3)
from
$268.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Energy Suspension – Strut Rod Bushing Set (Part No.4.7117G)
from
$34.49
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7341)
from
$130.99
Edelbrock part No. 7341 head gasket is intended for Ford 302 E-Boss and 351w E-Boss (Clevor) conversions using Edelbrock No. 61699 heads. This gasket comes as a set and has a 4.100″ bore size, .041″ compressed thickness and 9.2 cc volume.
See More
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7821)
from
$86.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)
from
$359.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – Classic Series Valve Covers: Small Block Ford 221-351W 62-95, Black Aluminum (Part No.41603)
from
$379.99
The Edelbrock part #41603 Classic Series Valve Covers are designed for Ford 221-351W V8 1962-95 applications and have a Black finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Small Block Ford 221-351W 62-95
- Tall
- Black Aluminum
- Set Of Two
Mr. Gasket – Dust Cap (Part No.2485)
from
$14.29
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Set of 2 Caps
- Easy Installation
- 2 Per Set
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1247)
from
$50.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Medium riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Motive Gear – Differential Mini Spool (Part No.MS9-31)
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
B & M – Torque Converter, Holeshot 2400 (Part No.40422)
from
$637.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Holeshot 2400 (Part No.40412)
from
$849.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Upgrade your 1968 Ford Galaxie with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1968 Ford Galaxie, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Galaxie functioning at its best. At Advance Auto Parts, we offer a wide selection of 95 Performance and Racing Products for the 1968 Ford Galaxie, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1968 Ford Galaxie at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $1,500.99, with
an average price of $326.01.
Our 95 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 1968 Ford Galaxie without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Ford Galaxie, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, Holley, B & M, and more.
Edelbrock Performance and Racing Products
start at just $394.99 and boast an impressive 4.4 stars average rating from customers.
Holley and B & M also bring quality to the table, with Performance and Racing Products available starting at $349.99, and at an average 4.2 stars rating.
With 230 customer reviews and counting, our 1968 Ford Galaxie Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1968 Ford Galaxie is always ready to roll. We’re committed to providing you with everything you need to keep your Galaxie in top shape, all in one place.
Start shopping confidently below for your 1968 Ford Galaxie!
Best-Selling Performance Ignition Products for 1968 Ford Galaxies
Enhance the driving experience in your Ford with 7 quality Performance Ignition Product components, starting at $34.49.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Contact And Condenser Kit (Part No.8203)
from
$89.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – Kit:Ford V8Sngl Pnt Eliminator (Part No.2020)
from
$113.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
Product Features:
See More
Product Features:
- Put And End To High Maintenance Point Ignitions
- Specialized Electronic Circuitry
- Stabalizes Ignition Timing From 1 To 10000 RPM
- Improves Performance And Fuel Efficiency
- Easy To Install With Hand Tools
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Accel – Contact Set Hp 32 Oz (Part No.110228)
from
$53.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Most Popular 1968 Ford Galaxie Performance Exhaust Products
Customize your Ford with 2 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets and
Performance Exhaust Headers, all
priced under $1,500.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1442)
from
$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Hooker Headers – Super Comp. Header (Part No.6130-1HKR)
from
$1500.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Top Picks for 1968 Ford Galaxie Performance Engines
Upgrade Ford Galaxies with top-quality Performance Engines parts, including 36 OEM and aftermarket selections for your 1968 model.
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Edelbrock – Performer 390 Intake Manifold for Ford FE, Satin Finish (Part No.2105)
from
$597.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7808)
from
$85.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Edelbrock – Intake Manifold Gasket for 1985-1976 390-428 FE Fords (Part No.7224)
from
$30.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.33-600-5)
from
$341.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
B & M – Holeshot 2400 (Part No.40412)
from
$849.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-221-3)
from
$648.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-224-3)
from
$648.99
FE FORD HYDRAULIC CAM AND LIFTER KIT – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for FE Ford engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .494″/.494″ Lift, 110 Lobe Separation
B & M – Torque Converter, Holeshot 2400 (Part No.40422)
from
$637.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – 10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring (Part No.741-100)
from
$637.99
10 Degree Superlock Steel Retainer Set of 100 for 1.500"-1.550" OD Valve Spring
Competition Cams – Magnum 248/248 Solid Flat Cam and Lifter Kit for Ford 352-428 (Part No.CL33-246-4)
from
$612.99
Magnum 248/248 Solid Flat Cam and Lifter Kit for Ford 352-428
Competition Cams – Magnum 236/236 Solid Flat Cam and Lifter Kit for Ford 352-428 (Part No.CL33-245-4)
from
$576.99
Magnum 236/236 Solid Flat Cam and Lifter Kit for Ford 352-428
B & M – Torque Converter, Tork Master 2400 (Part No.50441)
from
$529.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-600-5)
from
$426.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Magnum 2230/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-230-4)
from
$426.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – 16 Springs (Part No.26120-16)
from
$422.99
16 Springs
Competition Cams – High Energy 212/212 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-222-3)
from
$404.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.33-224-3)
from
$395.99
HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
Product Features:
See More
Product Features:
- HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .494″/.494″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – Magnum 248/248 Solid Flat Cam for Ford 352-428 (Part No.33-246-4)
from
$385.99
Magnum 248/248 Solid Flat Cam for Ford 352-428
Competition Cams – Adjustable Double Roller Timing Set for Ford 390-428 (Part No.3108KT)
from
$362.99
Adjustable Double Roller Timing Set for Ford 390-428
Competition Cams – Magnum 2230/230 Hydraulic Flat Cam (Part No.33-230-4)
from
$297.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
In-Demand Performance Suspension Products for 1968 Ford Galaxies
Select from 2 premium Performance Suspension Products parts for your 1968 Ford Galaxie, with prices ranging from $34.49 to $34.49.
Energy Suspension – Strut Rod Bushing Set (Part No.4.7117G)
from
$34.49
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Energy Suspension – Strut Rod Bushing Set (Part No.4.7117R)
from
$34.49
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Most Sold 1968 Ford Galaxie Performance Fuel Systems
Explore our best-selling Ford parts for the 1968 Galaxie among 7 OEM and aftermarket options starting from $394.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Top-Rated Performance and Racing Products Brands For Your 1968 Ford Galaxie
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1968 Ford Galaxies. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, Holley, and B & M, and more. Performance and Racing Products from these brands that fit a 1968 Galaxie start at just $349.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1968 Ford Galaxie Performance and Racing Products
When it comes to maintaining or upgrading your 1968 Ford Galaxie, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1968 Ford Galaxie. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $394.99, with an average price of just $476.99. Plus, with over 12 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$437.99
(1)
Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR)
“works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not ”
from
$597.99
(1)
Performer 390 Intake Manifold for Ford FE, Satin Finish
“lightweight-runs great…took 80lbs off my engine”
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
Popular Holley 1968 Ford Galaxie Performance and Racing Products
Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1968 Ford Galaxie owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1968 Galaxie, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Holley Performance and Racing Products range from $509.99 to $716.99, plus, with more than 53 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$509.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
from
$699.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
FAQs for 1968 Ford Galaxie Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1968 Ford Galaxies?
Out of 95 Performance and Racing Products that fit 1968 Ford Galaxies, the following parts are the top sellers:
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- High Performance Thermostat (22903641) – $32.49
- Dust Cap (22901302) – $14.29
What’s the price range for 1968 Ford Galaxie Performance and Racing Products?
Performance and Racing Product prices for the 1968 Ford Galaxie start at $8.99 and go up to $1,500.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1968 Ford Galaxie?
The average price for Performance and Racing Products for the 1968 Ford Galaxie is $326.01. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford Galaxie model years?
What are the cheapest Performance and Racing Products for my 1968 Ford Galaxie?
The cheapest 1968 Ford Galaxie Performance and Racing Products we carry in stock are:
- Camshaft Bolt for Ford 352-427 (50287929) – $8.99
- 10 Degree Steel Retainer for 26120 Beehive Spring (50289146) – $10.99
- 7 Degree Steel Retainer for 3/8" Valves with 1.500"-1.550" Spring (50289506) – $10.99
- 7 Degree Steel Retainer for 11/32" Valves with 1.500"-1.550" Spring (50289132) – $10.99
- Engine Valve Spring (50286866) – $12.99
What are the top-rated Performance and Racing Products that fit the 1968 Ford Galaxie?
Out of 230 reviews by customers, our 1968 Ford Galaxie Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1968 Ford Galaxie and their top-rated products:
- Performance Drivetrains
- Differential Ring And Pinion (10584208) – $344.99
- Performance Radiators
- Differential Ring And Pinion (10584208) – $344.99
- Performance Shifters
- Differential Ring And Pinion (10584208) – $344.99
What types of Performance and Racing Products do you sell for my 1968 Ford Galaxie?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1968 Ford Galaxie:
Can I get help with 1968 Ford Galaxie Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford Galaxie Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford Galaxie Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
