1968 Ford Galaxie Clutch Systems
More 1968 Ford Galaxie Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1968 Ford Galaxie, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1968 Ford Galaxie Clutch Systems
LuK – Clutch Kit: 10 15/16" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-027)
from
$171.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 10" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-014)
from
$147.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
ATP – M/T FLYL RNG GR (Part No.ZA-579)
from
$98.99
M/T FLYL RNG GR
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-572)
from
$40.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-502)
from
$37.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-501)
from
$26.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – FLYWHEEL SHIM (Part No.FS-10)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
National – Multi Purpose Bearing (Part No.2065)
from
$28.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1505)
from
$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Release Bearing (Part No.S-614034)
from
$23.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Bearing (Part No.614038)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1625)
from
$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.FC-65662)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.203-FF)
from
$10.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-242)
from
$128.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
LuK – OE Quality Flywheel (Part No.LFW451)
from
$183.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
ATP – ATP Manual Transmission Flywheel (Part No.Z-372)
from
$519.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Lakewood – Power Train (Part No.RM-956)
from
$176.99
Power Train
ATP – M/T FLYWHEEL (Part No.Z-401)
from
$231.99
M/T FLYWHEEL
Hays – Power Train (Part No.12-240)
from
$628.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Lakewood – Power Train (Part No.RM-955)
from
$189.99
Power Train
ATP – Automatic Transmission Flex Plate (Part No.Z-105)
from
$66.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Automatic Transmission Flex Plate (Part No.Z-107)
from
$58.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Flywheels (Part No.12-060)
from
$169.99
Flywheels
ATP – Automatic Transmission Flex Plate (Part No.Z-158)
from
$81.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Popular 1968 Ford Galaxie Clutch Systems Categories
1968 Ford Galaxie Clutch Systems
You count on your 1968 Ford Galaxie to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 16 Clutch Systems ranging in price from $10.99 to $1,210.00, you’re sure to find everything you need for your 1968 Ford Galaxie.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 4 different brands like National, ATP, and Hays. 1968 Ford Galaxie Clutch Systems start as low as $10.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 13 extensive product reviews on 1968 Ford Galaxie Clutch Systems.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1968 Ford Galaxie below to get started!
Top-Rated Clutch Systems Brands For Your 1968 Ford Galaxie
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Ford Galaxie running right for years to come. In our inventory you’ll find brands like National, ATP, Hays, and even more.
Popular ATP Clutch Systems
You’ll find popular ATP brand products across Flywheels. All are waiting to get your 1968 Ford Galaxie back on the road. Some of the top-rated ATP products in these categories are:
Top-Rated Clutch Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Clutch Systems for your 1968 Ford Galaxie, and some of our most reviewed parts include:
FAQs for 1968 Ford Galaxie Clutch Systems
What are the most purchased Clutch Systems for the 1968 Ford Galaxie?
Out of 16 Clutch Systems for the 1968 Ford Galaxie, the most popular in our inventory are:
from
$178.99
This product is not rated
Sfi Flexplate:Ford 57-Up 332-428: 429-46
Flywheels and Flexplates
from
$128.99
This product is not rated
ATP Automatic Transmission Flex Plate
Flywheels and Flexplates
