1968 Ford Galaxie 500 Drivetrains
More 1968 Ford Galaxie 500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1968 Ford Galaxie 500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1968 Ford Galaxie 500 Drivetrains
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33058)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt. 7/16″ head, .925″ long.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 7/16″ head
- .925″ long
Yukon Gear – O-Ring For 9" Ford (Part No.30028)
from
$14.99
O-ring for 9″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion support o-ring
- Fits Ford 9″
Motive Gear – Differential Mini Spool (Part No.MS9-31)
National – Bearings (Part No.208-LO)
from
$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
National – Bearings (Part No.HM89443)
from
$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)
from
$6.99
Pinion support bolt for 8″ and 9″ Ford.
Product Features:
See More
Product Features:
- Pinion support bolt for Ford 8″ and 9″
- 3/8″ x 24 thread
- 1.0″ long
Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)
from
$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.
Product Features:
See More
Product Features:
- Carrier race
- Fits Ford 9″
- Conversion race to install small bearing carrier into 3.250″ dropout
Richmond Gear – RngPnnInstlKt (Part No.83-1011-B)
from
$48.99
RngPnnInstlKt
Dorman – Spindle Nut 3/4 In.-16 Hex 1-1/4 In. (Part No.615-067.1)
from
$10.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Ford 9" Nodular Daytona Style Pinion Support (Part No.32164)
from
$175.99
Product Features:
See More
- Fits Ford 9″ with 28 spline pinion
- Larger inner pinion bearing reduces gear deflection under high load
- Nodular iron
- Does not include races
Yukon Gear – Bearing Install Kit For Ford Daytona 9" Differential, Lm501310 Bearings (Part No.11048)
from
$317.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses carrier bearings & races with an I.D. of 1.625″ and an O.D. of 2.891″. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits Ford 9″ with LM501310 carrier races and Daytona pinion support
- Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, pilot bearing, marking compound and brush.
Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)
from
$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.
Product Features:
See More
Product Features:
- Side adjuster lock bolt
Yukon Gear – Axle Bearing Retainer For Ford 9", Small Bearing, 3/8" Bolt Holes (Part No.33468)
from
$22.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits small bearing applications
- 3/8″ bolt holes
- 3 5/16″ x 2″ bolt pattern
Powertrax – Grip LOK Traction System (Part No.LK109028)
from
$668.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – Yoke (Short, For Daytona Support) For Ford 9" With 28 Spline Pinion And A 1310 U/Joint Size (Part No.41056)
from
$319.99
Yukon yoke (short, for Daytona support) for Ford 9″ with 28 spline pinion and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. 4″ length. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 9″
- 28 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)
Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13049)
from
$225.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 9″ with Daytona pinion support
- Included are pinion bearings and races, pinion seal, crush sleeve eliminator , complete pinion shim kit, and marking compound with brush.
Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-013.1)
from
$4.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Pinion Shaft (Part No.B7AZ4211A)
Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Product Features:
See More
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)
from
$4.99
Trac Loc clutch guide for 9″ Ford.
Product Features:
See More
Product Features:
- Clutch guide
- Fits Ford 8″ and 9″
Yukon Gear – Shim Kit For 9" Ford Tracloc Clutch (Part No.16030)
from
$46.99
Shim kit for 9″ Ford TracLoc clutch, (8″ also) positraction.
Product Features:
See More
Product Features:
- Shim kit
- Fits Ford 8″ and 9″ Trac Loc
Yukon Gear – Standard Open Spider Gear Kit For 9" Ford With 31 Spline Axles And 4-Pinion Design (Part No.16034)
from
$317.99
Yukon standard open spider gear kit for 9″ Ford with 31 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 9″ open differential with 31 spline axles
- Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Extra Short (Part No.17044)
from
$22.99
9″ FORD SPARTAN LOCKER EXTRA SHORT Cross Pin SHAFT .
Product Features:
See More
Product Features:
- USA Standard Gear heavy-duty cross pin shaft
- Fits Ford 9″
Neapco – Universal Joint (Part No.1-5900)
Popular 1968 Ford Galaxie 500 Drivetrains Categories
1968 Ford Galaxie 500 Drivetrains
You count on your 1968 Ford Galaxie 500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 359 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1968 Ford Galaxie 500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Driveworks, National, and Dorman. 1968 Ford Galaxie 500 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,440 extensive product reviews on 1968 Ford Galaxie 500 Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Seal with 4.1 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1968 Ford Galaxie 500 below to get started!
Top-Rated Drivetrains Brands For Your 1968 Ford Galaxie 500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Ford Galaxie 500 running right for years to come. In our inventory you’ll find brands like Driveworks, National, Dorman, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1968 Ford Galaxie 500 back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Driveworks Drivetrains
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Drivetrains for your 1968 Ford Galaxie 500, and some of our most reviewed Driveworks parts include:
FAQs for 1968 Ford Galaxie 500 Drivetrains
What are the most purchased Drivetrains for the 1968 Ford Galaxie 500?
Out of 359 Drivetrains for the 1968 Ford Galaxie 500, the most popular in our inventory are:
What are the top-rated 1968 Ford Galaxie 500 Drivetrains?
Top-rated Drivetrains for your 1968 Ford Galaxie 500 based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
